[Sat Jun 30 10:10:00 2012] Detection parameters:
  Position = (311.9, 320.2) = 11 4 21.67 38 12 32.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1581.3 +/- 53.1
  Background counts = 38.9
  Rate = 0.2 +/- 0.007

[Sat Jun 30 10:10:00 2012] Off-axis axis estimate = 1.86'
[Sat Jun 30 14:33:50 2012] Using EEF radius (= 7.36 ")to estimate initial spatial extent for simple fitting
[Sat Jun 30 14:33:50 2012] Initial guess for spatial extent in simple fitting = 7.36"
[Sat Jun 30 14:33:50 2012] source mask rpix=1.7, npix_max = 19, mask sum = 13, frac = 0.677
[Sat Jun 30 14:33:50 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 7.36"
[Sat Jun 30 16:56:41 2012] fullrun_mos2_xmm0411081601_pi300-10000_cl_pass0_src5.ximg exists
[Sat Jun 30 16:56:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411081601_pi300-10000_cl_pass0_src5.csv
[Sat Jun 30 16:56:41 2012] fullrun_mos2_xmm0411081601_pi300-10000_cl_pass0_src5_1.ximg exists
[Sat Jun 30 16:56:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411081601_pi300-10000_cl_pass0_src5.csv
[Sat Jun 30 16:56:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0411081601_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0411081601_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 30 16:56:42 2012] fullrun_mos2_xmm0411081601_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sat Jun 30 16:56:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411081601_pi300-10000_cl_pass0_tfrozen_src5.csv
[Sat Jun 30 16:56:42 2012] fullrun_mos2_xmm0411081601_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sat Jun 30 16:56:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411081601_pi300-10000_cl_pass0_tfrozen_src5.csv
[Sat Jun 30 16:56:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0411081601_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0411081601_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 30 16:56:56 2012] Spatial fit model total counts = 17524.400000, observed total counts = 14829.000000
[Sat Jun 30 16:56:56 2012] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 30 16:56:56 2012] Vigneting correction estimate = 1.000000
[Sat Jun 30 16:56:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 30 16:56:56 2012] Assessing source extent using major
[Sat Jun 30 16:56:56 2012] Source does appear to be extended
[Sat Jun 30 16:56:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 30 16:56:56 2012] Source is confused with source 2
[Sat Jun 30 20:52:31 2012] Using EEF radius (= 7.36 ")to estimate initial spatial extent for simple fitting
[Sat Jun 30 20:52:31 2012] Initial guess for spatial extent in simple fitting = 7.36"
[Sat Jun 30 20:52:31 2012] source mask rpix=1.7, npix_max = 19, mask sum = 13, frac = 0.677
[Sat Jun 30 20:52:31 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 7.36"
[Sat Jun 30 22:05:09 2012] fullrun_mos2_xmm0411081601_pi300-10000_cl_pass1_src5.ximg exists
[Sat Jun 30 22:05:09 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0411081601_pi300-10000_cl_pass1_src5.csv
[Sat Jun 30 22:05:09 2012] fullrun_mos2_xmm0411081601_pi300-10000_cl_pass1_src5_1.ximg exists
[Sat Jun 30 22:05:09 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0411081601_pi300-10000_cl_pass1_src5.csv
[Sat Jun 30 22:05:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0411081601_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0411081601_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 30 22:05:09 2012] fullrun_mos2_xmm0411081601_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sat Jun 30 22:05:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411081601_pi300-10000_cl_pass1_tfrozen_src5.csv
[Sat Jun 30 22:05:09 2012] fullrun_mos2_xmm0411081601_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sat Jun 30 22:05:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411081601_pi300-10000_cl_pass1_tfrozen_src5.csv
[Sat Jun 30 22:05:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0411081601_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0411081601_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 30 22:05:22 2012] Warning, spatial fit 5 centroid is now closest to src. 2
[Sat Jun 30 22:05:22 2012] Vigneting correction estimate = 1.000000
[Sat Jun 30 22:05:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 30 22:05:22 2012] Assessing source extent using major
[Sat Jun 30 22:05:22 2012] Source does appear to be extended
[Sat Jun 30 22:05:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul  1 10:01:25 2012] Counts = 1581.295166, rescaling region sizes by 2.000000
[Sun Jul  1 10:01:25 2012] XMMSAS src. selection expression = ellipse(27087.842896, 27813.199554, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sun Jul  1 10:01:25 2012] Writing source region out to fullrun_mos2_xmm0411081601_pi300-10000_pass1_cl_src4_src.reg
[Sun Jul  1 10:01:25 2012] Extracting stamp from image fullrun_mos2_xmm0411081601_pi300-10000_cl_sm2.00.img.gz, (237, 245) - (387, 395)
[Sun Jul  1 10:01:25 2012] XMMSAS bgd. selection expression = annulus(27087.842896, 27813.199554, 4350.000000, 8700.000000, X, Y) && !ellipse(25749.707200, 27756.316800, 3804.936109, 3804.936109, 0.000000, X, Y) && !ellipse(27061.098000, 28370.440200, 469.692814, 469.692814, 0.000000, X, Y) && !ellipse(26214.492249, 29017.852722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26477.409180, 28605.948822, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27411.698059, 27207.414795, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21866.438140, 30485.247000, 530.212815, 530.212815, 0.000000, X, Y) && !ellipse(24094.515076, 26915.980194, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25645.238037, 29673.103333, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24162.176000, 27568.677600, 1214.728035, 1214.728035, 0.000000, X, Y) && !ellipse(24755.641266, 25098.655121, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27591.127594, 25180.493744, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22049.640000, 32754.934000, 1510.784043, 1510.784043, 0.000000, X, Y) && !ellipse(23064.296000, 31333.696000, 1757.640051, 1757.640051, 0.000000, X, Y) && !ellipse(28392.690000, 24031.660000, 1205.976035, 1205.976035, 0.000000, X, Y) && !ellipse(23649.556000, 30672.484000, 1044.016030, 1044.016030, 0.000000, X, Y) && !ellipse(29387.984000, 22786.944000, 2500.504072, 2500.504072, 0.000000, X, Y) && !ellipse(29213.754000, 26611.137600, 1284.608037, 1284.608037, 0.000000, X, Y)
[Sun Jul  1 10:01:25 2012] Writing fullrun_mos2_xmm0411081601_pi300-10000_pass1_cl_src4.gif
[Sun Jul  1 10:10:22 2012] Mean detx,y = (-156.32, -350.47) 
[Sun Jul  1 10:10:23 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul  1 10:11:41 2012] Binned source spectrum to 10 counts/bin
[Sun Jul  1 10:11:41 2012] Setting source spectrum file to fullrun_mos2_xmm0411081601_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sun Jul  1 10:11:41 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0411081601_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sun Jul  1 10:24:09 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jul  1 10:24:09 2012] rmf not generated due to insufficient counts
[Sun Jul  1 11:05:14 2012] Updating aperture counts using extracted products
[Sun Jul  1 11:05:14 2012] Error reading totcts from fullrun_mos2_xmm0411081601_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sun Jul  1 11:05:14 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul  1 11:05:14 2012] Using photon index=1.80, rate=0.202, arf fullrun_mos2_xmm0411081601_pi300-10000_pass1_cl_src4.arf
[Sun Jul  1 11:05:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul  1 11:05:14 2012] Updating source flux to 2e-12
[Sun Jul  1 11:06:16 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting