[Wed May 30 17:31:11 2012] Detection parameters:
  Position = (290.4, 334.5) = 11 4 31.55 38 13 18.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2539.0 +/- 69.8
  Background counts = 80.1
  Rate = 0.5 +/- 0.01

[Wed May 30 17:31:12 2012] Off-axis axis estimate = 2.67'
[Wed May 30 17:34:36 2012] Using EEF radius (= 7.77 ")to estimate initial spatial extent for simple fitting
[Wed May 30 17:34:36 2012] Initial guess for spatial extent in simple fitting = 7.77"
[Wed May 30 17:34:36 2012] source mask rpix=1.8, npix_max = 20, mask sum = 21, frac = 1.005
[Wed May 30 17:34:36 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 7.77"
[Wed May 30 19:47:55 2012] fullrun_pn_xmm0411081501_pi300-10000_cl_pass0_src7.ximg exists
[Wed May 30 19:47:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0411081501_pi300-10000_cl_pass0_src7.csv
[Wed May 30 19:47:55 2012] fullrun_pn_xmm0411081501_pi300-10000_cl_pass0_src7_1.ximg exists
[Wed May 30 19:47:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0411081501_pi300-10000_cl_pass0_src7.csv
[Wed May 30 19:47:55 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0411081501_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0411081501_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 19:47:56 2012] fullrun_pn_xmm0411081501_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Wed May 30 19:47:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0411081501_pi300-10000_cl_pass0_tfrozen_src7.csv
[Wed May 30 19:47:56 2012] fullrun_pn_xmm0411081501_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Wed May 30 19:47:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0411081501_pi300-10000_cl_pass0_tfrozen_src7.csv
[Wed May 30 19:47:56 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0411081501_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0411081501_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 00:57:09 2012] Warning, spatial fit 7 centroid is now closest to src. 8
[Thu May 31 00:57:09 2012] Vigneting correction estimate = 1.000000
[Thu May 31 00:57:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 00:57:09 2012] Assessing source extent using major
[Thu May 31 00:57:09 2012] Source does appear to be extended
[Thu May 31 00:57:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 00:57:09 2012] Source is confused with source 8
[Thu May 31 00:57:29 2012] Using EEF radius (= 7.77 ")to estimate initial spatial extent for simple fitting
[Thu May 31 00:57:29 2012] Initial guess for spatial extent in simple fitting = 7.77"
[Thu May 31 00:57:29 2012] source mask rpix=1.8, npix_max = 20, mask sum = 21, frac = 1.005
[Thu May 31 00:57:29 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 7.77"
[Thu May 31 03:42:10 2012] fullrun_pn_xmm0411081501_pi300-10000_cl_pass1_src6.ximg exists
[Thu May 31 03:42:10 2012] fullrun_pn_xmm0411081501_pi300-10000_cl_pass1_src6_1.ximg exists
[Thu May 31 03:42:10 2012] Fit fullrun_pn_xmm0411081501_pi300-10000_cl_pass1_src6 appears to have run properly
[Thu May 31 03:42:11 2012] fullrun_pn_xmm0411081501_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Thu May 31 03:42:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0411081501_pi300-10000_cl_pass1_tfrozen_src6.csv
[Thu May 31 03:42:11 2012] fullrun_pn_xmm0411081501_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Thu May 31 03:42:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0411081501_pi300-10000_cl_pass1_tfrozen_src6.csv
[Thu May 31 03:42:11 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0411081501_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0411081501_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 05:20:44 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 11.111815 pixels away
[Thu May 31 05:20:44 2012] Source 7 is offset by -0.761060 and -3.562499 pixels which is larger than
2 X fitted extent = 2.026901 x 2.026901, not incorporating fit results
[Thu May 31 05:20:44 2012] Vigneting correction estimate = 1.000000
[Thu May 31 05:20:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 05:20:44 2012] Assessing source extent using major
[Thu May 31 05:20:44 2012] Source does appear to be extended
[Thu May 31 05:20:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 05:20:54 2012] Counts = 2539.001465, rescaling region sizes by 2.000000
[Thu May 31 05:20:54 2012] XMMSAS src. selection expression = ellipse(25218.205780, 29048.754608, 1305.000000, 1305.000000, 0.000000, X, Y)
[Thu May 31 05:20:54 2012] Writing source region out to fullrun_pn_xmm0411081501_pi300-10000_pass1_cl_src7_src.reg
[Thu May 31 05:20:54 2012] Extracting stamp from image fullrun_pn_xmm0411081501_pi300-10000_cl_sm2.00.img.gz, (215, 259) - (365, 409)
[Thu May 31 05:20:54 2012] XMMSAS bgd. selection expression = annulus(25218.205780, 29048.754608, 4350.000000, 8700.000000, X, Y) && !ellipse(26154.359000, 28125.514600, 3616.200104, 3616.200104, 0.000000, X, Y) && !ellipse(22293.541860, 30829.107800, 409.444812, 409.444812, 0.000000, X, Y) && !ellipse(26949.842438, 30276.479980, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26094.824768, 29722.675385, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24788.616730, 28697.255280, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23956.742950, 28022.973419, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27405.077604, 26422.664062, 7164.624206, 4669.196374, 54.199664, X, Y) && !ellipse(27921.508000, 25762.846000, 1194.104034, 1194.104034, 0.000000, X, Y) && !ellipse(28317.998000, 25282.312000, 7002.960202, 7002.960202, 0.000000, X, Y) && !ellipse(29057.038000, 24243.370000, 6675.144192, 6675.144192, 0.000000, X, Y) && !ellipse(29650.604000, 23426.928000, 6564.384189, 6564.384189, 0.000000, X, Y) && !ellipse(30174.356000, 22765.586000, 1468.912042, 1468.912042, 0.000000, X, Y) && !ellipse(30572.189178, 22217.339005, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30904.813883, 21705.796876, 1799.680052, 1335.665828, 78.155310, X, Y) && !ellipse(31917.870000, 20339.150000, 6480.048186, 6480.048186, 0.000000, X, Y) && !ellipse(32359.252000, 19702.030000, 1799.680052, 1184.104034, 76.329800, X, Y)
[Thu May 31 05:20:54 2012] Writing fullrun_pn_xmm0411081501_pi300-10000_pass1_cl_src7.gif
[Thu May 31 05:33:07 2012] Mean detx,y = (398.54, -526.79) 
[Thu May 31 05:33:10 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 31 05:34:51 2012] Binned source spectrum to 10 counts/bin
[Thu May 31 05:34:51 2012] Setting source spectrum file to fullrun_pn_xmm0411081501_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Thu May 31 05:34:51 2012] Setting bgd. spectrum file to fullrun_pn_xmm0411081501_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Thu May 31 16:01:42 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu May 31 16:01:42 2012] rmf not generated due to insufficient counts
[Thu May 31 23:56:41 2012] Updating aperture counts using extracted products
[Thu May 31 23:56:41 2012] Error reading totcts from fullrun_pn_xmm0411081501_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Thu May 31 23:56:41 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 31 23:56:41 2012] Using photon index=1.80, rate=0.502, arf fullrun_pn_xmm0411081501_pi300-10000_pass1_cl_src7.arf
[Thu May 31 23:56:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 31 23:56:41 2012] Updating source flux to 1.4e-12
[Thu May 31 23:59:09 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting