[Wed May 30 17:31:12 2012] Detection parameters:
  Position = (305.4, 278.4) = 11 4 26.03 38 9 17.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 66.2 +/- 15.0
  Background counts = 51.8
  Rate = 0.01 +/- 0.003

[Wed May 30 17:31:12 2012] Off-axis axis estimate = 1.54'
[Wed May 30 17:34:36 2012] Using EEF radius (= 7.20 ")to estimate initial spatial extent for simple fitting
[Wed May 30 17:34:36 2012] Initial guess for spatial extent in simple fitting = 7.20"
[Wed May 30 17:34:36 2012] source mask rpix=1.7, npix_max = 18, mask sum = 25, frac = 1.346
[Wed May 30 17:34:36 2012] Giving source the simple spatial ID 34 for pass 0, mean size = 7.20"
[Wed May 30 19:47:56 2012] fullrun_pn_xmm0411081501_pi300-10000_cl_pass0_src34.ximg exists
[Wed May 30 19:47:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0411081501_pi300-10000_cl_pass0_src34.csv
[Wed May 30 19:47:56 2012] fullrun_pn_xmm0411081501_pi300-10000_cl_pass0_src34_1.ximg exists
[Wed May 30 19:47:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0411081501_pi300-10000_cl_pass0_src34.csv
[Wed May 30 19:47:56 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0411081501_pi300-10000_cl_pass0_src34_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0411081501_pi300-10000_cl_pass0_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 19:47:56 2012] fullrun_pn_xmm0411081501_pi300-10000_cl_pass0_tfrozen_src34.ximg exists
[Wed May 30 19:47:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0411081501_pi300-10000_cl_pass0_tfrozen_src34.csv
[Wed May 30 19:47:56 2012] fullrun_pn_xmm0411081501_pi300-10000_cl_pass0_tfrozen_src34_1.ximg exists
[Wed May 30 19:47:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0411081501_pi300-10000_cl_pass0_tfrozen_src34.csv
[Wed May 30 19:47:56 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0411081501_pi300-10000_cl_pass0_tfrozen_src34_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0411081501_pi300-10000_cl_pass0_tfrozen_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 00:57:09 2012] Source 36 is offset by 1.298517 and -6.472692 pixels which is larger than
2 X fitted extent = 6.619724 x 2.164520, not incorporating fit results
[Thu May 31 00:57:09 2012] Vigneting correction estimate = 1.000000
[Thu May 31 00:57:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 00:57:09 2012] Assessing source extent using major
[Thu May 31 00:57:09 2012] Source does appear to be extended
[Thu May 31 00:57:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 00:57:09 2012] Deleting source due to low Poisson probability 0.9