[Wed May 30 17:31:11 2012] Detection parameters:
  Position = (84.8, 286.9) = 11 5 47.39 38 9 47.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 70.3 +/- 10.9
  Background counts = 6.0
  Rate = 0.01 +/- 0.002

[Wed May 30 17:31:12 2012] Off-axis axis estimate = 15.51'
[Wed May 30 17:34:36 2012] Using EEF radius (= 14.18 ")to estimate initial spatial extent for simple fitting
[Wed May 30 17:34:36 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 30 17:34:36 2012] Initial guess for spatial extent in simple fitting = 14.18"
[Wed May 30 17:34:36 2012] source mask rpix=3.3, npix_max = 56, mask sum = 64, frac = 1.131
[Wed May 30 17:34:36 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 14.18"
[Wed May 30 19:47:55 2012] fullrun_pn_xmm0411081501_pi300-10000_cl_pass0_src13.ximg exists
[Wed May 30 19:47:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0411081501_pi300-10000_cl_pass0_src13.csv
[Wed May 30 19:47:55 2012] fullrun_pn_xmm0411081501_pi300-10000_cl_pass0_src13_1.ximg exists
[Wed May 30 19:47:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0411081501_pi300-10000_cl_pass0_src13.csv
[Wed May 30 19:47:55 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0411081501_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0411081501_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 19:47:56 2012] fullrun_pn_xmm0411081501_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Wed May 30 19:47:56 2012] fullrun_pn_xmm0411081501_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Wed May 30 19:47:56 2012] Fit fullrun_pn_xmm0411081501_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Thu May 31 00:57:09 2012] Spatial fit model total counts = 145.998000, observed total counts = 146.000000
[Thu May 31 00:57:09 2012] Offset between fit and detection position for source 13 = 0.147981 pixels
[Thu May 31 00:57:09 2012] 148.280800 total counts/ 107.247000 bgd. counts: snr = 3.962316
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.147981 pixels
  Position = (84.8, 286.7) = 11 5 47.38 38 9 49.7
  Extent = 5.5 (4.1-7.5)", rotation angle = 0
  Source counts = 41.0 +/- 12.2
  Background counts = 107.2
  Rate = 0.006 +/- 0.002
[Thu May 31 00:57:09 2012] Vigneting correction estimate = 1.000000
[Thu May 31 00:57:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 00:57:09 2012] Assessing source extent using major axis lower bound
[Thu May 31 00:57:09 2012] Source does appear to be extended
[Thu May 31 00:57:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 00:57:09 2012] Deleting source due to low Poisson probability 0.8