[Wed May 30 17:32:08 2012] Detection parameters:
  Position = (277.5, 311.5) = 11 4 36.33 38 11 42.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 283.6 +/- 23.5
  Background counts = 32.9
  Rate = 0.04 +/- 0.003

[Wed May 30 17:32:09 2012] Off-axis axis estimate = 1.79'
[Wed May 30 23:23:08 2012] Using EEF radius (= 7.33 ")to estimate initial spatial extent for simple fitting
[Wed May 30 23:23:08 2012] Initial guess for spatial extent in simple fitting = 7.33"
[Wed May 30 23:23:08 2012] source mask rpix=1.7, npix_max = 19, mask sum = 22, frac = 1.153
[Wed May 30 23:23:08 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 7.33"
[Thu May 31 00:56:59 2012] fullrun_mos2_xmm0411081501_pi300-10000_cl_pass0_src5.ximg exists
[Thu May 31 00:56:59 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0411081501_pi300-10000_cl_pass0_src5.csv
[Thu May 31 00:56:59 2012] fullrun_mos2_xmm0411081501_pi300-10000_cl_pass0_src5_1.ximg exists
[Thu May 31 00:56:59 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0411081501_pi300-10000_cl_pass0_src5.csv
[Thu May 31 00:56:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0411081501_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0411081501_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 00:57:00 2012] fullrun_mos2_xmm0411081501_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Thu May 31 00:57:00 2012] fullrun_mos2_xmm0411081501_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Thu May 31 00:57:00 2012] Fit fullrun_mos2_xmm0411081501_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Thu May 31 00:57:22 2012] Source 6 is offset by -6.285079 and 6.268661 pixels which is larger than
2 X fitted extent = 1.400612 x 1.400612, not incorporating fit results
[Thu May 31 00:57:22 2012] Vigneting correction estimate = 1.000000
[Thu May 31 00:57:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 00:57:22 2012] Assessing source extent using major
[Thu May 31 00:57:22 2012] Source does appear to be extended
[Thu May 31 00:57:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 04:09:49 2012] Using EEF radius (= 7.33 ")to estimate initial spatial extent for simple fitting
[Thu May 31 04:09:49 2012] Initial guess for spatial extent in simple fitting = 7.33"
[Thu May 31 04:09:49 2012] source mask rpix=1.7, npix_max = 19, mask sum = 22, frac = 1.153
[Thu May 31 04:09:49 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 7.33"
[Thu May 31 05:20:38 2012] fullrun_mos2_xmm0411081501_pi300-10000_cl_pass1_src5.ximg exists
[Thu May 31 05:20:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411081501_pi300-10000_cl_pass1_src5.csv
[Thu May 31 05:20:38 2012] fullrun_mos2_xmm0411081501_pi300-10000_cl_pass1_src5_1.ximg exists
[Thu May 31 05:20:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411081501_pi300-10000_cl_pass1_src5.csv
[Thu May 31 05:20:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0411081501_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0411081501_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 05:20:39 2012] fullrun_mos2_xmm0411081501_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Thu May 31 05:20:39 2012] fullrun_mos2_xmm0411081501_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Thu May 31 05:20:39 2012] Fit fullrun_mos2_xmm0411081501_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Thu May 31 05:20:48 2012] Source 6 is offset by -6.285079 and 6.268661 pixels which is larger than
2 X fitted extent = 1.360561 x 1.360561, not incorporating fit results
[Thu May 31 05:20:48 2012] Vigneting correction estimate = 1.000000
[Thu May 31 05:20:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 05:20:48 2012] Assessing source extent using major
[Thu May 31 05:20:48 2012] Source does appear to be extended
[Thu May 31 05:20:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 22:11:02 2012] XMMSAS src. selection expression = ellipse(24089.720093, 27054.851501, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 31 22:11:02 2012] Writing source region out to fullrun_mos2_xmm0411081501_pi300-10000_pass1_cl_src6_src.reg
[Thu May 31 22:11:02 2012] Extracting stamp from image fullrun_mos2_xmm0411081501_pi300-10000_cl_sm2.00.img.gz, (240, 274) - (315, 349)
[Thu May 31 22:11:02 2012] XMMSAS bgd. selection expression = annulus(24089.720093, 27054.851501, 1087.500000, 2175.000000, X, Y) && !ellipse(26154.554600, 28071.278000, 4014.600116, 4014.600116, 0.000000, X, Y) && !ellipse(26149.798000, 28244.664200, 3546.072102, 3546.072102, 0.000000, X, Y) && !ellipse(29350.182000, 23711.726000, 3494.496101, 605.487217, 52.567000, X, Y)
[Thu May 31 22:11:02 2012] Writing fullrun_mos2_xmm0411081501_pi300-10000_pass1_cl_src6.gif
[Thu May 31 22:30:30 2012] Mean detx,y = (1859.09, 363.79) 
[Thu May 31 22:30:31 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 31 22:30:42 2012] Binned source spectrum to 10 counts/bin
[Thu May 31 22:30:42 2012] Setting source spectrum file to fullrun_mos2_xmm0411081501_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Thu May 31 22:30:42 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0411081501_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Thu May 31 23:48:14 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu May 31 23:48:14 2012] rmf not generated due to insufficient counts
[Thu May 31 23:56:42 2012] Updating aperture counts using extracted products
[Thu May 31 23:56:42 2012] Error reading totcts from fullrun_mos2_xmm0411081501_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Thu May 31 23:56:42 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 31 23:56:42 2012] Using photon index=1.80, rate=0.0376, arf fullrun_mos2_xmm0411081501_pi300-10000_pass1_cl_src6.arf
[Thu May 31 23:56:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 31 23:56:42 2012] Updating source flux to 4e-13
[Thu May 31 23:58:08 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting