[Wed May 30 17:32:08 2012] Detection parameters:
  Position = (334.0, 277.9) = 11 4 15.47 38 9 14.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 109.5 +/- 14.3
  Background counts = 20.4
  Rate = 0.01 +/- 0.002

[Wed May 30 17:32:09 2012] Off-axis axis estimate = 2.98'
[Wed May 30 23:23:08 2012] Using EEF radius (= 7.92 ")to estimate initial spatial extent for simple fitting
[Wed May 30 23:23:08 2012] Initial guess for spatial extent in simple fitting = 7.92"
[Wed May 30 23:23:08 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.743
[Wed May 30 23:23:08 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 7.92"
[Thu May 31 00:57:00 2012] fullrun_mos2_xmm0411081501_pi300-10000_cl_pass0_src11.ximg exists
[Thu May 31 00:57:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411081501_pi300-10000_cl_pass0_src11.csv
[Thu May 31 00:57:00 2012] fullrun_mos2_xmm0411081501_pi300-10000_cl_pass0_src11_1.ximg exists
[Thu May 31 00:57:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411081501_pi300-10000_cl_pass0_src11.csv
[Thu May 31 00:57:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0411081501_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0411081501_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 00:57:00 2012] fullrun_mos2_xmm0411081501_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Thu May 31 00:57:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411081501_pi300-10000_cl_pass0_tfrozen_src11.csv
[Thu May 31 00:57:00 2012] fullrun_mos2_xmm0411081501_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Thu May 31 00:57:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411081501_pi300-10000_cl_pass0_tfrozen_src11.csv
[Thu May 31 00:57:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0411081501_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0411081501_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 00:57:22 2012] Warning, spatial fit 11 centroid is now closest to src. 41
[Thu May 31 00:57:22 2012] Spatial fit model total counts = 644.882000, observed total counts = 582.000000
[Thu May 31 00:57:22 2012] Poor agreement between spatial fit and data for source 11
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May 31 00:57:22 2012] Vigneting correction estimate = 1.000000
[Thu May 31 00:57:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 00:57:22 2012] Assessing source extent using major
[Thu May 31 00:57:22 2012] Source does appear to be extended
[Thu May 31 00:57:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 04:09:49 2012] Using EEF radius (= 7.92 ")to estimate initial spatial extent for simple fitting
[Thu May 31 04:09:49 2012] Initial guess for spatial extent in simple fitting = 7.92"
[Thu May 31 04:09:49 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.743
[Thu May 31 04:09:49 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 7.92"
[Thu May 31 05:20:38 2012] fullrun_mos2_xmm0411081501_pi300-10000_cl_pass1_src10.ximg exists
[Thu May 31 05:20:38 2012] fullrun_mos2_xmm0411081501_pi300-10000_cl_pass1_src10_1.ximg exists
[Thu May 31 05:20:38 2012] Fit fullrun_mos2_xmm0411081501_pi300-10000_cl_pass1_src10 appears to have run properly
[Thu May 31 05:20:39 2012] fullrun_mos2_xmm0411081501_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Thu May 31 05:20:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411081501_pi300-10000_cl_pass1_tfrozen_src10.csv
[Thu May 31 05:20:39 2012] fullrun_mos2_xmm0411081501_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Thu May 31 05:20:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411081501_pi300-10000_cl_pass1_tfrozen_src10.csv
[Thu May 31 05:20:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0411081501_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0411081501_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 05:20:48 2012] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 11.407117 pixels away
[Thu May 31 05:20:48 2012] Spatial fit model total counts = 493.218000, observed total counts = 468.000000
[Thu May 31 05:20:48 2012] Offset between fit and detection position for source 11 = 3.135966 pixels
[Thu May 31 05:20:48 2012] 494.463000 total counts/ 327.859000 bgd. counts: snr = 9.201145
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 3.135966 pixels
  Position = (336.3, 275.8) = 11 4 14.63 38 9 3.6
  Extent = 19.2 (19.2-38.3)" x 6.9 (5.2-9.5)", rotation angle = 50 (44-57) degrees
  Source counts = 166.6 +/- 22.2
  Background counts = 327.9
  Rate = 0.02 +/- 0.003
[Thu May 31 05:20:48 2012] Spatial fit model total counts = 513.186000, observed total counts = 482.000000
[Thu May 31 05:20:48 2012] Offset between fit and detection position for source 11 = 3.105135 pixels
[Thu May 31 05:20:48 2012] Warning, changing simple spatial fit ID from 10 to 11
[Thu May 31 05:20:48 2012] 503.741000 total counts/ 262.797000 bgd. counts: snr = 14.862981
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 3.105135 pixels
  Position = (337.9, 273.1) = 11 4 14.03 38 8 52.1
  Extent = 43.7 (43.7-87.4)" x 7.6 (6.0-8.9)", rotation angle = 53 (48-56) degrees
  Source counts = 240.9 +/- 22.4
  Background counts = 262.8
  Rate = 0.03 +/- 0.003
[Thu May 31 05:20:48 2012] Vigneting correction estimate = 1.000000
[Thu May 31 05:20:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 05:20:48 2012] Assessing source extent using major axis lower bound
[Thu May 31 05:20:48 2012] Source does appear to be extended
[Thu May 31 05:20:48 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 4.92
[Thu May 31 05:20:48 2012] Source is asymmetric
[Thu May 31 05:20:48 2012] Source is confused with source 32
[Thu May 31 22:11:02 2012] XMMSAS src. selection expression = ellipse(29350.182000, 23711.726000, 2620.872075, 454.115413, 52.567000, X, Y)
[Thu May 31 22:11:02 2012] Writing source region out to fullrun_mos2_xmm0411081501_pi300-10000_pass1_cl_src11_src.reg
[Thu May 31 22:11:02 2012] Extracting stamp from image fullrun_mos2_xmm0411081501_pi300-10000_cl_sm2.00.img.gz, (187, 122) - (489, 424)
[Thu May 31 22:11:02 2012] XMMSAS bgd. selection expression = annulus(29350.182000, 23711.726000, 4368.120126, 8736.240251, X, Y) && !ellipse(26154.554600, 28071.278000, 4014.600116, 4014.600116, 0.000000, X, Y) && !ellipse(26149.798000, 28244.664200, 3546.072102, 3546.072102, 0.000000, X, Y) && !ellipse(27673.778656, 26866.118744, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22302.621420, 30834.167200, 405.746412, 405.746412, 0.000000, X, Y) && !ellipse(24089.720093, 27054.851501, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25195.587585, 30274.504639, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29745.206000, 23214.958000, 1306.352038, 1306.352038, 0.000000, X, Y)
[Thu May 31 22:11:02 2012] Writing fullrun_mos2_xmm0411081501_pi300-10000_pass1_cl_src11.gif
[Thu May 31 22:30:59 2012] Mean detx,y = (-544.05, -5330.58) 
[Thu May 31 22:31:00 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 31 22:32:26 2012] Binned source spectrum to 10 counts/bin
[Thu May 31 22:32:27 2012] Setting source spectrum file to fullrun_mos2_xmm0411081501_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Thu May 31 22:32:27 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0411081501_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Thu May 31 23:56:42 2012] Updating aperture counts using extracted products
[Thu May 31 23:56:42 2012] Error reading totcts from fullrun_mos2_xmm0411081501_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Thu May 31 23:56:42 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 31 23:56:42 2012] Using photon index=1.80, rate=0.028, arf fullrun_mos2_xmm0411081501_pi300-10000_pass1_cl_src11.arf
[Thu May 31 23:56:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 31 23:56:42 2012] Updating source flux to 3.3e-13
[Thu May 31 23:58:08 2012] Flag p found in src. 11 procflags, skipping spectral fitting
[Thu May 31 23:58:08 2012] Flag c found in src. 11 procflags, skipping spectral fitting