[Wed May 30 17:32:08 2012] Detection parameters: Position = (299.9, 321.9) = 11 4 28.04 38 12 24.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 52176.7 +/- 266.4 Background counts = 40.8 Rate = 6 +/- 0.03 [Wed May 30 17:32:09 2012] Off-axis axis estimate = 1.71' [Wed May 30 23:23:08 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting [Wed May 30 23:23:08 2012] Initial guess for spatial extent in simple fitting = 7.28" [Wed May 30 23:23:08 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.846 [Wed May 30 23:23:08 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28" [Thu May 31 00:56:59 2012] fullrun_mos2_xmm0411081501_pi300-10000_cl_pass0_src1.ximg exists [Thu May 31 00:56:59 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0411081501_pi300-10000_cl_pass0_src1.csv [Thu May 31 00:56:59 2012] fullrun_mos2_xmm0411081501_pi300-10000_cl_pass0_src1_1.ximg exists [Thu May 31 00:56:59 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0411081501_pi300-10000_cl_pass0_src1.csv [Thu May 31 00:56:59 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0411081501_pi300-10000_cl_pass0_src1_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0411081501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu May 31 00:57:00 2012] fullrun_mos2_xmm0411081501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists [Thu May 31 00:57:00 2012] fullrun_mos2_xmm0411081501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists [Thu May 31 00:57:00 2012] Fit fullrun_mos2_xmm0411081501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly [Thu May 31 00:57:22 2012] Spatial fit model total counts = 107848.000000, observed total counts = 100510.000000 [Thu May 31 00:57:22 2012] Offset between fit and detection position for source 1 = 1.478973 pixels [Thu May 31 00:57:22 2012] 108251.900000 total counts/ 24799.000000 bgd. counts: snr = 529.937129 Spatial fit parameters: Offset between fit and detection position for source 1 = 1.478973 pixels Position = (300.8, 323.1) = 11 4 27.70 38 12 29.5 Extent = 14.4 (14.3-14.6)", rotation angle = 0 Source counts = 83452.9 +/- 329.0 Background counts = 24799.0 Rate = 1e+01 +/- 0.04 [Thu May 31 00:57:22 2012] Vigneting correction estimate = 1.000000 [Thu May 31 00:57:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu May 31 00:57:22 2012] Assessing source extent using major axis lower bound [Thu May 31 00:57:22 2012] Source does appear to be extended [Thu May 31 00:57:22 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Thu May 31 00:57:22 2012] Source is confused with source 3 [Thu May 31 04:09:49 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Thu May 31 04:09:49 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Thu May 31 04:09:49 2012] Initial guess for spatial extent in simple fitting = 14.42" [Thu May 31 04:09:49 2012] source mask rpix=3.3, npix_max = 58, mask sum = 55, frac = 0.945 [Thu May 31 04:09:49 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 14.42" [Thu May 31 05:20:38 2012] fullrun_mos2_xmm0411081501_pi300-10000_cl_pass1_src1.ximg exists [Thu May 31 05:20:38 2012] fullrun_mos2_xmm0411081501_pi300-10000_cl_pass1_src1_1.ximg exists [Thu May 31 05:20:38 2012] Fit fullrun_mos2_xmm0411081501_pi300-10000_cl_pass1_src1 appears to have run properly [Thu May 31 05:20:39 2012] fullrun_mos2_xmm0411081501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists [Thu May 31 05:20:39 2012] fullrun_mos2_xmm0411081501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists [Thu May 31 05:20:39 2012] Fit fullrun_mos2_xmm0411081501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly [Thu May 31 05:20:48 2012] Spatial fit model total counts = 145369.000000, observed total counts = 132483.000000 [Thu May 31 05:20:48 2012] Offset between fit and detection position for source 1 = 0.373058 pixels [Thu May 31 05:20:48 2012] 145636.900000 total counts/ 35949.900000 bgd. counts: snr = 578.503932 Spatial fit parameters: Offset between fit and detection position for source 1 = 0.373058 pixels Position = (301.2, 323.2) = 11 4 27.58 38 12 30.1 Extent = 16.7 (16.7-16.8)", rotation angle = 0 Source counts = 109687.0 +/- 381.6 Background counts = 35949.9 Rate = 1e+01 +/- 0.04 [Thu May 31 05:20:48 2012] Vigneting correction estimate = 1.000000 [Thu May 31 05:20:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu May 31 05:20:48 2012] Assessing source extent using major axis lower bound [Thu May 31 05:20:48 2012] Source does appear to be extended [Thu May 31 05:20:48 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Thu May 31 22:11:02 2012] Counts = 109687.000000, rescaling region sizes by 3.000000 [Thu May 31 22:11:02 2012] XMMSAS src. selection expression = ellipse(26154.554600, 28071.278000, 3010.950087, 3010.950087, 0.000000, X, Y) [Thu May 31 22:11:02 2012] Writing source region out to fullrun_mos2_xmm0411081501_pi300-10000_pass1_cl_src1_src.reg [Thu May 31 22:11:02 2012] Extracting stamp from image fullrun_mos2_xmm0411081501_pi300-10000_cl_sm2.00.img.gz, (128, 150) - (474, 496) [Thu May 31 22:11:02 2012] XMMSAS bgd. selection expression = annulus(26154.554600, 28071.278000, 15054.750433, 30109.500866, X, Y) && !ellipse(26149.798000, 28244.664200, 3546.072102, 3546.072102, 0.000000, X, Y) && !ellipse(27673.778656, 26866.118744, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22302.621420, 30834.167200, 405.746412, 405.746412, 0.000000, X, Y) && !ellipse(24089.720093, 27054.851501, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25195.587585, 30274.504639, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29350.182000, 23711.726000, 3494.496101, 605.487217, 52.567000, X, Y) && !ellipse(29745.206000, 23214.958000, 1306.352038, 1306.352038, 0.000000, X, Y) [Thu May 31 22:11:02 2012] Writing fullrun_mos2_xmm0411081501_pi300-10000_pass1_cl_src1.gif [Thu May 31 22:11:11 2012] Mean detx,y = (-269.28, -92.25) [Thu May 31 22:11:13 2012] Setting backscal keywords in source and bgd. spectrum [Thu May 31 22:20:11 2012] Binned source spectrum to 10 counts/bin [Thu May 31 22:20:11 2012] Setting source spectrum file to fullrun_mos2_xmm0411081501_pi300-10000_pass1_cl_src1_src_b10.pi.gz [Thu May 31 22:20:11 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0411081501_pi300-10000_pass1_cl_src1_bgd.pi.gz [Thu May 31 23:56:42 2012] Updating aperture counts using extracted products [Thu May 31 23:56:42 2012] Error reading totcts from fullrun_mos2_xmm0411081501_pi300-10000_pass1_cl_src1_src_b10.pi.gz [Thu May 31 23:56:42 2012] Calculating source flux in energy range 0.30-8.00 [Thu May 31 23:56:42 2012] Using photon index=1.80, rate=12.7, arf fullrun_mos2_xmm0411081501_pi300-10000_pass1_cl_src1.arf [Thu May 31 23:56:42 2012] Assuming count rate is from the 0.30-10.00 bandpass [Thu May 31 23:56:42 2012] Updating source flux to 1.1e-10 [Thu May 31 23:58:08 2012] Flag c found in src. 1 procflags, skipping spectral fitting [Thu May 31 23:59:09 2012] Reading fit data from xmm0411081501/analysis//spectral/fullrun_mos2_xmm0411081501_pi300-10000_pass1_cl_src1_pl.csv [Thu May 31 23:59:09 2012] Spectral fit parameter nH value = 3.26834e+20 [Thu May 31 23:59:09 2012] Spectral fit parameter PhoIndex value = 2.56696 [Thu May 31 23:59:09 2012] Failed to get F(0.3-8.0) from xmm0411081501/analysis//spectral/fullrun_mos2_xmm0411081501_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected [Thu May 31 23:59:09 2012] Calculating source flux in energy range 0.30-8.00 [Thu May 31 23:59:09 2012] Using Nh = 3.3e+20, photon index=2.57, rate=12.7, arf fullrun_mos2_xmm0411081501_pi300-10000_pass1_cl_src1.arf [Thu May 31 23:59:09 2012] Assuming count rate is from the 0.30-10.00 bandpass [Thu May 31 23:59:09 2012] Updating source flux to 8.9e-11