[Wed May 30 17:31:38 2012] Detection parameters:
  Position = (300.7, 349.5) = 11 4 27.75 38 14 21.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 250.3 +/- 22.4
  Background counts = 26.7
  Rate = 0.03 +/- 0.003

[Wed May 30 17:31:39 2012] Off-axis axis estimate = 3.70'
[Wed May 30 19:47:57 2012] Using EEF radius (= 8.28 ")to estimate initial spatial extent for simple fitting
[Wed May 30 19:47:57 2012] Initial guess for spatial extent in simple fitting = 8.28"
[Wed May 30 19:47:57 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.865
[Wed May 30 19:47:57 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 8.28"
[Wed May 30 23:23:06 2012] fullrun_mos1_xmm0411081501_pi300-10000_cl_pass0_src6.ximg exists
[Wed May 30 23:23:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0411081501_pi300-10000_cl_pass0_src6.csv
[Wed May 30 23:23:06 2012] fullrun_mos1_xmm0411081501_pi300-10000_cl_pass0_src6_1.ximg exists
[Wed May 30 23:23:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0411081501_pi300-10000_cl_pass0_src6.csv
[Wed May 30 23:23:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0411081501_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0411081501_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 23:23:07 2012] fullrun_mos1_xmm0411081501_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Wed May 30 23:23:07 2012] fullrun_mos1_xmm0411081501_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Wed May 30 23:23:07 2012] Fit fullrun_mos1_xmm0411081501_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Thu May 31 00:57:15 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 10.371439 pixels away
[Thu May 31 00:57:15 2012] Source 3 is offset by 0.009216 and -3.605157 pixels which is larger than
2 X fitted extent = 2.707890 x 2.707890, not incorporating fit results
[Thu May 31 00:57:15 2012] Vigneting correction estimate = 1.000000
[Thu May 31 00:57:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 00:57:15 2012] Assessing source extent using major
[Thu May 31 00:57:15 2012] Source does appear to be extended
[Thu May 31 00:57:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 03:42:11 2012] Using EEF radius (= 8.28 ")to estimate initial spatial extent for simple fitting
[Thu May 31 03:42:11 2012] Initial guess for spatial extent in simple fitting = 8.28"
[Thu May 31 03:42:11 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.865
[Thu May 31 03:42:11 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 8.28"
[Thu May 31 04:09:49 2012] fullrun_mos1_xmm0411081501_pi300-10000_cl_pass1_src5.ximg exists
[Thu May 31 04:09:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0411081501_pi300-10000_cl_pass1_src5.csv
[Thu May 31 04:09:49 2012] fullrun_mos1_xmm0411081501_pi300-10000_cl_pass1_src5_1.ximg exists
[Thu May 31 04:09:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0411081501_pi300-10000_cl_pass1_src5.csv
[Thu May 31 04:09:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0411081501_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0411081501_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 04:09:49 2012] fullrun_mos1_xmm0411081501_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Thu May 31 04:09:49 2012] fullrun_mos1_xmm0411081501_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Thu May 31 04:09:49 2012] Fit fullrun_mos1_xmm0411081501_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Thu May 31 05:20:46 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 14.977415 pixels away
[Thu May 31 05:20:46 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 10.440105 pixels away
[Thu May 31 05:20:46 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 26.048887 pixels away
[Thu May 31 05:20:46 2012] Vigneting correction estimate = 1.000000
[Thu May 31 05:20:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 05:20:46 2012] Assessing source extent using major
[Thu May 31 05:20:46 2012] Source does appear to be extended
[Thu May 31 05:20:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 18:12:28 2012] XMMSAS src. selection expression = ellipse(26114.036560, 30356.011383, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 31 18:12:28 2012] Writing source region out to fullrun_mos1_xmm0411081501_pi300-10000_pass1_cl_src3_src.reg
[Thu May 31 18:12:28 2012] Extracting stamp from image fullrun_mos1_xmm0411081501_pi300-10000_cl_sm2.00.img.gz, (263, 312) - (338, 387)
[Thu May 31 18:12:28 2012] XMMSAS bgd. selection expression = annulus(26114.036560, 30356.011383, 1087.500000, 2175.000000, X, Y) && !ellipse(26195.639600, 28104.752000, 3882.408112, 3882.408112, 0.000000, X, Y) && !ellipse(26060.891200, 28044.283800, 3513.552101, 3513.552101, 0.000000, X, Y) && !ellipse(25063.474000, 30491.312000, 1296.480037, 1296.480037, 0.000000, X, Y) && !ellipse(24107.514000, 28892.514000, 647.067219, 647.067219, 0.000000, X, Y) && !ellipse(23808.166000, 26247.376000, 2360.912068, 2360.912068, 0.000000, X, Y)
[Thu May 31 18:12:28 2012] Writing fullrun_mos1_xmm0411081501_pi300-10000_pass1_cl_src3.gif
[Thu May 31 18:31:42 2012] Mean detx,y = (1930.45, 1319.29) 
[Thu May 31 18:31:43 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 31 18:31:53 2012] Binned source spectrum to 10 counts/bin
[Thu May 31 18:31:54 2012] Setting source spectrum file to fullrun_mos1_xmm0411081501_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu May 31 18:31:54 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0411081501_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Thu May 31 20:58:06 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu May 31 20:58:06 2012] rmf not generated due to insufficient counts
[Thu May 31 23:56:41 2012] Updating aperture counts using extracted products
[Thu May 31 23:56:41 2012] Error reading totcts from fullrun_mos1_xmm0411081501_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu May 31 23:56:41 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 31 23:56:41 2012] Using photon index=1.80, rate=0.0326, arf fullrun_mos1_xmm0411081501_pi300-10000_pass1_cl_src3.arf
[Thu May 31 23:56:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 31 23:56:41 2012] Updating source flux to 3.5e-13
[Thu May 31 23:56:43 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting