[Wed May 30 17:31:38 2012] Detection parameters:
  Position = (304.0, 323.0) = 11 4 26.53 38 12 28.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 52400.1 +/- 274.7
  Background counts = 32.2
  Rate = 6 +/- 0.03

[Wed May 30 17:31:39 2012] Off-axis axis estimate = 1.83'
[Wed May 30 19:47:57 2012] Using EEF radius (= 7.34 ")to estimate initial spatial extent for simple fitting
[Wed May 30 19:47:57 2012] Initial guess for spatial extent in simple fitting = 7.34"
[Wed May 30 19:47:57 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.836
[Wed May 30 19:47:57 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.34"
[Wed May 30 23:23:06 2012] fullrun_mos1_xmm0411081501_pi300-10000_cl_pass0_src1.ximg exists
[Wed May 30 23:23:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0411081501_pi300-10000_cl_pass0_src1.csv
[Wed May 30 23:23:06 2012] fullrun_mos1_xmm0411081501_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed May 30 23:23:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0411081501_pi300-10000_cl_pass0_src1.csv
[Wed May 30 23:23:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0411081501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0411081501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 23:23:07 2012] fullrun_mos1_xmm0411081501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed May 30 23:23:07 2012] fullrun_mos1_xmm0411081501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed May 30 23:23:07 2012] Fit fullrun_mos1_xmm0411081501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu May 31 00:57:15 2012] Spatial fit model total counts = 125454.000000, observed total counts = 124493.000000
[Thu May 31 00:57:15 2012] Offset between fit and detection position for source 2 = 1.967127 pixels
[Thu May 31 00:57:15 2012] 114206.800000 total counts/ 17798.300000 bgd. counts: snr = 722.646768
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.967127 pixels
  Position = (302.6, 324.4) = 11 4 27.05 38 12 35.2
  Extent = 14.7 (14.7-29.4)", rotation angle = 0
  Source counts = 96408.5 +/- 337.9
  Background counts = 17798.3
  Rate = 1e+01 +/- 0.04
[Thu May 31 00:57:15 2012] Vigneting correction estimate = 1.000000
[Thu May 31 00:57:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 00:57:15 2012] Assessing source extent using major axis lower bound
[Thu May 31 00:57:15 2012] Source does appear to be extended
[Thu May 31 00:57:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 00:57:15 2012] Source is confused with source 1
[Thu May 31 03:42:11 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 31 03:42:11 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 31 03:42:11 2012] Initial guess for spatial extent in simple fitting = 14.69"
[Thu May 31 03:42:11 2012] source mask rpix=3.4, npix_max = 60, mask sum = 49, frac = 0.815
[Thu May 31 03:42:11 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 14.69"
[Thu May 31 04:09:48 2012] fullrun_mos1_xmm0411081501_pi300-10000_cl_pass1_src1.ximg exists
[Thu May 31 04:09:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0411081501_pi300-10000_cl_pass1_src1.csv
[Thu May 31 04:09:48 2012] fullrun_mos1_xmm0411081501_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu May 31 04:09:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0411081501_pi300-10000_cl_pass1_src1.csv
[Thu May 31 04:09:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0411081501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0411081501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 04:09:49 2012] fullrun_mos1_xmm0411081501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu May 31 04:09:49 2012] fullrun_mos1_xmm0411081501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu May 31 04:09:49 2012] Fit fullrun_mos1_xmm0411081501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu May 31 05:20:46 2012] Spatial fit model total counts = 159844.000000, observed total counts = 159760.000000
[Thu May 31 05:20:46 2012] Offset between fit and detection position for source 2 = 1.242765 pixels
[Thu May 31 05:20:46 2012] 159726.100000 total counts/ 37519.100000 bgd. counts: snr = 630.913582
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.242765 pixels
  Position = (301.7, 323.6) = 11 4 27.40 38 12 31.8
  Extent = 16.2 (16.1-16.3)", rotation angle = 0
  Source counts = 122207.0 +/- 399.7
  Background counts = 37519.1
  Rate = 1e+01 +/- 0.05
[Thu May 31 05:20:46 2012] Vigneting correction estimate = 1.000000
[Thu May 31 05:20:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 05:20:46 2012] Assessing source extent using major axis lower bound
[Thu May 31 05:20:46 2012] Source does appear to be extended
[Thu May 31 05:20:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 18:12:28 2012] Counts = 122207.000000, rescaling region sizes by 3.000000
[Thu May 31 18:12:28 2012] XMMSAS src. selection expression = ellipse(26195.639600, 28104.752000, 2911.806084, 2911.806084, 0.000000, X, Y)
[Thu May 31 18:12:28 2012] Writing source region out to fullrun_mos1_xmm0411081501_pi300-10000_pass1_cl_src2_src.reg
[Thu May 31 18:12:28 2012] Extracting stamp from image fullrun_mos1_xmm0411081501_pi300-10000_cl_sm2.00.img.gz, (134, 156) - (469, 491)
[Thu May 31 18:12:28 2012] XMMSAS bgd. selection expression = annulus(26195.639600, 28104.752000, 14559.030419, 29118.060838, X, Y) && !ellipse(26060.891200, 28044.283800, 3513.552101, 3513.552101, 0.000000, X, Y) && !ellipse(22307.864660, 30824.893000, 412.658412, 412.658412, 0.000000, X, Y) && !ellipse(25063.474000, 30491.312000, 1296.480037, 1296.480037, 0.000000, X, Y) && !ellipse(26114.036560, 30356.011383, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24107.514000, 28892.514000, 647.067219, 647.067219, 0.000000, X, Y) && !ellipse(21433.474000, 24605.534000, 1373.584040, 1373.584040, 0.000000, X, Y) && !ellipse(23068.364000, 25817.970000, 1180.456034, 1180.456034, 0.000000, X, Y) && !ellipse(23808.166000, 26247.376000, 2360.912068, 2360.912068, 0.000000, X, Y) && !ellipse(27900.704000, 25581.392000, 2391.664069, 2391.664069, 0.000000, X, Y) && !ellipse(21061.478000, 24394.912000, 2533.488073, 2533.488073, 0.000000, X, Y)
[Thu May 31 18:12:28 2012] Writing fullrun_mos1_xmm0411081501_pi300-10000_pass1_cl_src2.gif
[Thu May 31 18:12:37 2012] Mean detx,y = (171.35, 160.56) 
[Thu May 31 18:12:39 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 31 18:20:45 2012] Binned source spectrum to 10 counts/bin
[Thu May 31 18:20:45 2012] Setting source spectrum file to fullrun_mos1_xmm0411081501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu May 31 18:20:45 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0411081501_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu May 31 23:56:41 2012] Updating aperture counts using extracted products
[Thu May 31 23:56:41 2012] Error reading totcts from fullrun_mos1_xmm0411081501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu May 31 23:56:41 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 31 23:56:41 2012] Using photon index=1.80, rate=14.2, arf fullrun_mos1_xmm0411081501_pi300-10000_pass1_cl_src2.arf
[Thu May 31 23:56:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 31 23:56:41 2012] Updating source flux to 1.2e-10
[Thu May 31 23:56:43 2012] Flag c found in src. 2 procflags, skipping spectral fitting
[Thu May 31 23:58:08 2012] Reading fit data from xmm0411081501/analysis//spectral/fullrun_mos1_xmm0411081501_pi300-10000_pass1_cl_src2_pl.csv
[Thu May 31 23:58:08 2012] Spectral fit parameter nH value = 2.14555e+20
[Thu May 31 23:58:08 2012] Spectral fit parameter PhoIndex value = 2.52814
[Thu May 31 23:58:08 2012] Failed to get F(0.3-8.0) from xmm0411081501/analysis//spectral/fullrun_mos1_xmm0411081501_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Thu May 31 23:58:08 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 31 23:58:08 2012] Using Nh = 2.1e+20, photon index=2.53, rate=14.2, arf fullrun_mos1_xmm0411081501_pi300-10000_pass1_cl_src2.arf
[Thu May 31 23:58:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 31 23:58:08 2012] Updating source flux to 9.6e-11