[Wed May 30 17:31:38 2012] Detection parameters:
  Position = (489.0, 368.1) = 11 3 18.22 38 15 43.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 38.2 +/- 7.3
  Background counts = 4.0
  Rate = 0.004 +/- 0.0008

[Wed May 30 17:31:39 2012] Off-axis axis estimate = 14.71'
[Wed May 30 19:47:57 2012] Using EEF radius (= 13.78 ")to estimate initial spatial extent for simple fitting
[Wed May 30 19:47:57 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 30 19:47:57 2012] Initial guess for spatial extent in simple fitting = 13.78"
[Wed May 30 19:47:57 2012] source mask rpix=3.2, npix_max = 53, mask sum = 43, frac = 0.799
[Wed May 30 19:47:57 2012] Giving source the simple spatial ID 32 for pass 0, mean size = 13.78"
[Wed May 30 23:23:07 2012] fullrun_mos1_xmm0411081501_pi300-10000_cl_pass0_src32.ximg exists
[Wed May 30 23:23:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0411081501_pi300-10000_cl_pass0_src32.csv
[Wed May 30 23:23:07 2012] fullrun_mos1_xmm0411081501_pi300-10000_cl_pass0_src32_1.ximg exists
[Wed May 30 23:23:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0411081501_pi300-10000_cl_pass0_src32.csv
[Wed May 30 23:23:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0411081501_pi300-10000_cl_pass0_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0411081501_pi300-10000_cl_pass0_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 23:23:07 2012] fullrun_mos1_xmm0411081501_pi300-10000_cl_pass0_tfrozen_src32.ximg exists
[Wed May 30 23:23:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0411081501_pi300-10000_cl_pass0_tfrozen_src32.csv
[Wed May 30 23:23:07 2012] fullrun_mos1_xmm0411081501_pi300-10000_cl_pass0_tfrozen_src32_1.ximg exists
[Wed May 30 23:23:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0411081501_pi300-10000_cl_pass0_tfrozen_src32.csv
[Wed May 30 23:23:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0411081501_pi300-10000_cl_pass0_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0411081501_pi300-10000_cl_pass0_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 00:57:15 2012] Spatial fit model total counts = 106.939000, observed total counts = 66.000000
[Thu May 31 00:57:15 2012] Poor agreement between spatial fit and data for source 15
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May 31 00:57:15 2012] Vigneting correction estimate = 1.000000
[Thu May 31 00:57:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 00:57:15 2012] Assessing source extent using major
[Thu May 31 00:57:15 2012] Source does appear to be extended
[Thu May 31 00:57:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 00:57:15 2012] Deleting source due to low Poisson probability 0.8