[Wed May 30 17:31:38 2012] Detection parameters:
  Position = (265.1, 297.1) = 11 4 40.88 38 10 36.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 92.3 +/- 13.4
  Background counts = 13.2
  Rate = 0.01 +/- 0.002

[Wed May 30 17:31:39 2012] Off-axis axis estimate = 2.42'
[Wed May 30 19:47:57 2012] Using EEF radius (= 7.64 ")to estimate initial spatial extent for simple fitting
[Wed May 30 19:47:57 2012] Initial guess for spatial extent in simple fitting = 7.64"
[Wed May 30 19:47:57 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.786
[Wed May 30 19:47:57 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 7.64"
[Wed May 30 23:23:07 2012] fullrun_mos1_xmm0411081501_pi300-10000_cl_pass0_src10.ximg exists
[Wed May 30 23:23:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0411081501_pi300-10000_cl_pass0_src10.csv
[Wed May 30 23:23:07 2012] fullrun_mos1_xmm0411081501_pi300-10000_cl_pass0_src10_1.ximg exists
[Wed May 30 23:23:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0411081501_pi300-10000_cl_pass0_src10.csv
[Wed May 30 23:23:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0411081501_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0411081501_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 23:23:07 2012] fullrun_mos1_xmm0411081501_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Wed May 30 23:23:07 2012] fullrun_mos1_xmm0411081501_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Wed May 30 23:23:07 2012] Fit fullrun_mos1_xmm0411081501_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Thu May 31 00:57:15 2012] Warning, spatial fit 10 centroid is now closest to src. 9
[Thu May 31 00:57:15 2012] Spatial fit model total counts = 512.962000, observed total counts = 513.000000
[Thu May 31 00:57:15 2012] Offset between fit and detection position for source 10 = 0.636240 pixels
[Thu May 31 00:57:15 2012] Warning, changing simple spatial fit ID from 10 to 11
[Thu May 31 00:57:15 2012] 557.234000 total counts/ 385.687000 bgd. counts: snr = 8.735055
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.636240 pixels
  Position = (265.7, 297.3) = 11 4 40.66 38 10 37.4
  Extent = 14.8 (14.7-29.5)", rotation angle = 0
  Source counts = 171.5 +/- 23.6
  Background counts = 385.7
  Rate = 0.02 +/- 0.003
[Thu May 31 00:57:15 2012] Vigneting correction estimate = 1.000000
[Thu May 31 00:57:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 00:57:15 2012] Assessing source extent using major axis lower bound
[Thu May 31 00:57:15 2012] Source does appear to be extended
[Thu May 31 00:57:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 00:57:15 2012] Source is confused with source 9
[Thu May 31 03:42:11 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 31 03:42:11 2012] Initial guess for spatial extent in simple fitting = 14.76"
[Thu May 31 03:42:11 2012] source mask rpix=3.4, npix_max = 60, mask sum = 64, frac = 1.056
[Thu May 31 03:42:11 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 14.76"
[Thu May 31 04:09:49 2012] fullrun_mos1_xmm0411081501_pi300-10000_cl_pass1_src9.ximg exists
[Thu May 31 04:09:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0411081501_pi300-10000_cl_pass1_src9.csv
[Thu May 31 04:09:49 2012] fullrun_mos1_xmm0411081501_pi300-10000_cl_pass1_src9_1.ximg exists
[Thu May 31 04:09:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0411081501_pi300-10000_cl_pass1_src9.csv
[Thu May 31 04:09:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0411081501_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0411081501_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 04:09:49 2012] fullrun_mos1_xmm0411081501_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Thu May 31 04:09:49 2012] fullrun_mos1_xmm0411081501_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Thu May 31 04:09:49 2012] Fit fullrun_mos1_xmm0411081501_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Thu May 31 05:20:46 2012] Warning, spatial fit 9 centroid is now closest to src. 9
[Thu May 31 05:20:46 2012] Vigneting correction estimate = 1.000000
[Thu May 31 05:20:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 05:20:46 2012] Assessing source extent using major axis lower bound
[Thu May 31 05:20:46 2012] Source does appear to be extended
[Thu May 31 05:20:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 18:12:28 2012] XMMSAS src. selection expression = ellipse(23068.364000, 25817.970000, 885.342025, 885.342025, 0.000000, X, Y)
[Thu May 31 18:12:28 2012] Writing source region out to fullrun_mos1_xmm0411081501_pi300-10000_pass1_cl_src10_src.reg
[Thu May 31 18:12:28 2012] Extracting stamp from image fullrun_mos1_xmm0411081501_pi300-10000_cl_sm2.00.img.gz, (215, 246) - (317, 348)
[Thu May 31 18:12:28 2012] XMMSAS bgd. selection expression = annulus(23068.364000, 25817.970000, 1475.570042, 2951.140085, X, Y) && !ellipse(26195.639600, 28104.752000, 3882.408112, 3882.408112, 0.000000, X, Y) && !ellipse(26060.891200, 28044.283800, 3513.552101, 3513.552101, 0.000000, X, Y) && !ellipse(24107.514000, 28892.514000, 647.067219, 647.067219, 0.000000, X, Y) && !ellipse(21433.474000, 24605.534000, 1373.584040, 1373.584040, 0.000000, X, Y) && !ellipse(23808.166000, 26247.376000, 2360.912068, 2360.912068, 0.000000, X, Y) && !ellipse(27900.704000, 25581.392000, 2391.664069, 2391.664069, 0.000000, X, Y) && !ellipse(21061.478000, 24394.912000, 2533.488073, 2533.488073, 0.000000, X, Y)
[Thu May 31 18:12:28 2012] Writing fullrun_mos1_xmm0411081501_pi300-10000_pass1_cl_src10.gif
[Thu May 31 18:32:34 2012] Mean detx,y = (187.84, -3659.29) 
[Thu May 31 18:32:34 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 31 18:32:46 2012] Binned source spectrum to 10 counts/bin
[Thu May 31 18:32:46 2012] Setting source spectrum file to fullrun_mos1_xmm0411081501_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Thu May 31 18:32:46 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0411081501_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Thu May 31 23:56:41 2012] Updating aperture counts using extracted products
[Thu May 31 23:56:41 2012] Error reading totcts from fullrun_mos1_xmm0411081501_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Thu May 31 23:56:41 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 31 23:56:41 2012] Using photon index=1.80, rate=0.0199, arf fullrun_mos1_xmm0411081501_pi300-10000_pass1_cl_src10.arf
[Thu May 31 23:56:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 31 23:56:42 2012] Updating source flux to 2.1e-13
[Thu May 31 23:56:43 2012] Flag c found in src. 10 procflags, skipping spectral fitting