[Sat May 25 01:07:48 2013] Detection parameters:
  Position = (268.1, 337.8) = 11 4 40.53 38 13 26.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 104.2 +/- 18.0
  Background counts = 55.7
  Rate = 0.02 +/- 0.003

[Sat May 25 01:07:48 2013] Off-axis axis estimate = 3.60'
[Sat May 25 01:11:37 2013] Using EEF radius (= 8.23 ")to estimate initial spatial extent for simple fitting
[Sat May 25 01:11:37 2013] Initial guess for spatial extent in simple fitting = 8.23"
[Sat May 25 01:11:37 2013] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.093
[Sat May 25 01:11:37 2013] Giving source the simple spatial ID 35 for pass 0, mean size = 8.23"
[Sat May 25 06:36:12 2013] fullrun_pn_xmm0411081401_pi300-10000_cl_pass0_src35.ximg exists
[Sat May 25 06:36:12 2013] fullrun_pn_xmm0411081401_pi300-10000_cl_pass0_src35_1.ximg exists
[Sat May 25 06:36:12 2013] Fit fullrun_pn_xmm0411081401_pi300-10000_cl_pass0_src35 appears to have run properly
[Sat May 25 06:36:13 2013] fullrun_pn_xmm0411081401_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Sat May 25 06:36:13 2013] fullrun_pn_xmm0411081401_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Sat May 25 06:36:13 2013] Fit fullrun_pn_xmm0411081401_pi300-10000_cl_pass0_tfrozen_src35 appears to have run properly
[Sat May 25 11:10:12 2013] Spatial fit model total counts = 1079.100000, observed total counts = 1074.000000
[Sat May 25 11:10:12 2013] Offset between fit and detection position for source 37 = 4.888009 pixels
[Sat May 25 11:10:12 2013] 1082.851000 total counts/ 785.433000 bgd. counts: snr = 10.612377
Spatial fit parameters:
  Offset between fit and detection position for source 37 = 4.888009 pixels
  Position = (273.0, 337.0) = 11 4 38.75 38 13 23.9
  Extent = 16.5 (16.4-32.9)", rotation angle = 0
  Source counts = 297.4 +/- 32.9
  Background counts = 785.4
  Rate = 0.04 +/- 0.005
[Sat May 25 11:10:12 2013] Vigneting correction estimate = 1.000000
[Sat May 25 11:10:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 11:10:12 2013] Assessing source extent using major axis lower bound
[Sat May 25 11:10:12 2013] Source does appear to be extended
[Sat May 25 11:10:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 25 11:10:34 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat May 25 11:10:34 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat May 25 11:10:34 2013] Initial guess for spatial extent in simple fitting = 16.46"
[Sat May 25 11:10:34 2013] source mask rpix=3.8, npix_max = 73, mask sum = 64, frac = 0.872
[Sat May 25 11:10:34 2013] Giving source the simple spatial ID 26 for pass 1, mean size = 16.46"
[Sun May 26 02:00:20 2013] fullrun_pn_xmm0411081401_pi300-10000_cl_pass1_src26.ximg exists
[Sun May 26 02:00:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0411081401_pi300-10000_cl_pass1_src26.csv
[Sun May 26 02:00:20 2013] fullrun_pn_xmm0411081401_pi300-10000_cl_pass1_src26_1.ximg exists
[Sun May 26 02:00:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0411081401_pi300-10000_cl_pass1_src26.csv
[Sun May 26 02:00:20 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0411081401_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0411081401_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 26 02:00:20 2013] fullrun_pn_xmm0411081401_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Sun May 26 02:00:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0411081401_pi300-10000_cl_pass1_tfrozen_src26.csv
[Sun May 26 02:00:20 2013] fullrun_pn_xmm0411081401_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Sun May 26 02:00:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0411081401_pi300-10000_cl_pass1_tfrozen_src26.csv
[Sun May 26 02:00:20 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0411081401_pi300-10000_cl_pass1_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0411081401_pi300-10000_cl_pass1_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 26 06:16:05 2013] Warning, spatial fit 26 centroid is now closest to src. 25
[Sun May 26 06:16:05 2013] Vigneting correction estimate = 1.000000
[Sun May 26 06:16:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 26 06:16:05 2013] Assessing source extent using major axis lower bound
[Sun May 26 06:16:05 2013] Source does appear to be extended
[Sun May 26 06:16:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 26 06:16:36 2013] XMMSAS src. selection expression = ellipse(23699.614000, 29268.704200, 987.372028, 987.372028, 0.000000, X, Y)
[Sun May 26 06:16:36 2013] Writing source region out to fullrun_pn_xmm0411081401_pi300-10000_pass1_cl_src37_src.reg
[Sun May 26 06:16:36 2013] Extracting stamp from image fullrun_pn_xmm0411081401_pi300-10000_cl_sm2.00.img.gz, (216, 280) - (330, 394)
[Sun May 26 06:16:36 2013] XMMSAS bgd. selection expression = annulus(23699.614000, 29268.704200, 1645.620047, 3291.240095, X, Y) && !ellipse(26340.112240, 28252.380060, 3520.824101, 3444.144099, 228.628000, X, Y) && !ellipse(28060.326000, 25952.380000, 1191.096034, 425.120812, 52.086700, X, Y) && !ellipse(25804.138885, 29580.554321, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24920.935425, 28796.582581, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26295.677734, 29819.594574, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27116.549072, 30427.628143, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24046.846680, 28152.698151, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24568.870575, 25451.651886, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22491.376620, 30940.168000, 500.654414, 407.894412, 310.993467, X, Y)
[Sun May 26 06:16:36 2013] Writing fullrun_pn_xmm0411081401_pi300-10000_pass1_cl_src37.gif
[Sun May 26 09:07:40 2013] Mean detx,y = (-674.41, -2291.58) 
[Sun May 26 09:07:45 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 26 09:08:24 2013] Binned source spectrum to 10 counts/bin
[Sun May 26 09:08:25 2013] Setting source spectrum file to fullrun_pn_xmm0411081401_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Sun May 26 09:08:25 2013] Setting bgd. spectrum file to fullrun_pn_xmm0411081401_pi300-10000_pass1_cl_src37_bgd.pi.gz
[Sun May 26 15:47:59 2013] Updating aperture counts using extracted products
[Sun May 26 15:47:59 2013] Total counts from fullrun_pn_xmm0411081401_pi300-10000_pass1_cl_src37_src_b10.pi.gz = 3054.00
[Sun May 26 15:47:59 2013] Total counts from fullrun_pn_xmm0411081401_pi300-10000_pass1_cl_src37_bgd.pi.gz = 2663.00
[Sun May 26 15:47:59 2013] Got source and background scale factors 3060800.000000, 10208763.000000
[Sun May 26 15:47:59 2013] User source parameters:
  Position = (273.0, 337.0) = 11 4 38.75 38 13 23.9
  Extent = 16.5 (16.4-32.9)", rotation angle = 0
  Source aperture counts = 2255.6 +/- 56.3
  Background aperture counts = 798.4
  Rate = 0.3 +/- 0.008

[Sun May 26 15:48:00 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 26 15:48:00 2013] Using photon index=1.80, rate=0.0443, arf fullrun_pn_xmm0411081401_pi300-10000_pass1_cl_src37.arf
[Sun May 26 15:48:00 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 26 15:48:00 2013] Updating source flux to 1.3e-13
[Sun May 26 15:49:06 2013] xmm0411081401/analysis//spectral/fullrun_pn_xmm0411081401_pi300-10000_pass1_cl_src37_pl.csv not found, spectral fit skipped or did not complete