[Sat May 25 01:07:47 2013] Detection parameters:
  Position = (329.2, 352.6) = 11 4 18.00 38 14 33.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 126.9 +/- 17.8
  Background counts = 65.0
  Rate = 0.03 +/- 0.004

[Sat May 25 01:07:48 2013] Off-axis axis estimate = 4.52'
[Sat May 25 01:11:37 2013] Using EEF radius (= 8.69 ")to estimate initial spatial extent for simple fitting
[Sat May 25 01:11:37 2013] Initial guess for spatial extent in simple fitting = 8.69"
[Sat May 25 01:11:37 2013] source mask rpix=2.0, npix_max = 24, mask sum = 19, frac = 0.762
[Sat May 25 01:11:37 2013] Giving source the simple spatial ID 22 for pass 0, mean size = 8.69"
[Sat May 25 06:36:12 2013] fullrun_pn_xmm0411081401_pi300-10000_cl_pass0_src22.ximg exists
[Sat May 25 06:36:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0411081401_pi300-10000_cl_pass0_src22.csv
[Sat May 25 06:36:12 2013] fullrun_pn_xmm0411081401_pi300-10000_cl_pass0_src22_1.ximg exists
[Sat May 25 06:36:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0411081401_pi300-10000_cl_pass0_src22.csv
[Sat May 25 06:36:12 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0411081401_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0411081401_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 06:36:13 2013] fullrun_pn_xmm0411081401_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Sat May 25 06:36:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0411081401_pi300-10000_cl_pass0_tfrozen_src22.csv
[Sat May 25 06:36:13 2013] fullrun_pn_xmm0411081401_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Sat May 25 06:36:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0411081401_pi300-10000_cl_pass0_tfrozen_src22.csv
[Sat May 25 06:36:13 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0411081401_pi300-10000_cl_pass0_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0411081401_pi300-10000_cl_pass0_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 11:10:12 2013] Source 22 is offset by 5.094006 and 4.839905 pixels which is larger than
2 X fitted extent = 7.987403 x 2.943494, not incorporating fit results
[Sat May 25 11:10:12 2013] Vigneting correction estimate = 1.000000
[Sat May 25 11:10:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 11:10:12 2013] Assessing source extent using major
[Sat May 25 11:10:12 2013] Source does appear to be extended
[Sat May 25 11:10:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 25 11:10:34 2013] Using EEF radius (= 8.69 ")to estimate initial spatial extent for simple fitting
[Sat May 25 11:10:34 2013] Initial guess for spatial extent in simple fitting = 8.69"
[Sat May 25 11:10:34 2013] source mask rpix=2.0, npix_max = 24, mask sum = 19, frac = 0.762
[Sat May 25 11:10:34 2013] Giving source the simple spatial ID 20 for pass 1, mean size = 8.69"
[Sun May 26 02:00:20 2013] fullrun_pn_xmm0411081401_pi300-10000_cl_pass1_src20.ximg exists
[Sun May 26 02:00:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0411081401_pi300-10000_cl_pass1_src20.csv
[Sun May 26 02:00:20 2013] fullrun_pn_xmm0411081401_pi300-10000_cl_pass1_src20_1.ximg exists
[Sun May 26 02:00:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0411081401_pi300-10000_cl_pass1_src20.csv
[Sun May 26 02:00:20 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0411081401_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0411081401_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 26 02:00:20 2013] fullrun_pn_xmm0411081401_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Sun May 26 02:00:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0411081401_pi300-10000_cl_pass1_tfrozen_src20.csv
[Sun May 26 02:00:20 2013] fullrun_pn_xmm0411081401_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Sun May 26 02:00:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0411081401_pi300-10000_cl_pass1_tfrozen_src20.csv
[Sun May 26 02:00:20 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0411081401_pi300-10000_cl_pass1_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0411081401_pi300-10000_cl_pass1_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 26 06:16:05 2013] Source 22 is offset by 5.051960 and 4.775491 pixels which is larger than
2 X fitted extent = 7.987403 x 2.992276, not incorporating fit results
[Sun May 26 06:16:05 2013] Vigneting correction estimate = 1.000000
[Sun May 26 06:16:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 26 06:16:05 2013] Assessing source extent using major
[Sun May 26 06:16:05 2013] Source does appear to be extended
[Sun May 26 06:16:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 26 06:16:36 2013] XMMSAS src. selection expression = ellipse(28589.126556, 30628.499695, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 26 06:16:36 2013] Writing source region out to fullrun_pn_xmm0411081401_pi300-10000_pass1_cl_src22_src.reg
[Sun May 26 06:16:36 2013] Extracting stamp from image fullrun_pn_xmm0411081401_pi300-10000_cl_sm2.00.img.gz, (292, 315) - (367, 390)
[Sun May 26 06:16:36 2013] XMMSAS bgd. selection expression = annulus(28589.126556, 30628.499695, 1087.500000, 2175.000000, X, Y) && !ellipse(26340.112240, 28252.380060, 3520.824101, 3444.144099, 228.628000, X, Y) && !ellipse(25804.138885, 29580.554321, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26295.677734, 29819.594574, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27116.549072, 30427.628143, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 26 06:16:36 2013] Writing fullrun_pn_xmm0411081401_pi300-10000_pass1_cl_src22.gif
[Sun May 26 09:03:07 2013] Mean detx,y = (3911.93, -627.89) 
[Sun May 26 09:03:11 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 26 09:03:36 2013] Binned source spectrum to 10 counts/bin
[Sun May 26 09:03:37 2013] Setting source spectrum file to fullrun_pn_xmm0411081401_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Sun May 26 09:03:37 2013] Setting bgd. spectrum file to fullrun_pn_xmm0411081401_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Sun May 26 12:07:08 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 26 12:07:08 2013] rmf not generated due to insufficient counts
[Sun May 26 15:47:57 2013] Updating aperture counts using extracted products
[Sun May 26 15:47:57 2013] Total counts from fullrun_pn_xmm0411081401_pi300-10000_pass1_cl_src22_src_b10.pi.gz = 563.00
[Sun May 26 15:47:57 2013] Total counts from fullrun_pn_xmm0411081401_pi300-10000_pass1_cl_src22_bgd.pi.gz = 1794.00
[Sun May 26 15:47:57 2013] Got source and background scale factors 887627.000000, 5205111.000000
[Sun May 26 15:47:57 2013] User source parameters:
  Position = (329.2, 352.6) = 11 4 18.00 38 14 33.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 257.1 +/- 24.7
  Background aperture counts = 305.9
  Rate = 0.04 +/- 0.004

[Sun May 26 15:47:57 2013] Updating counts from extracted products
[Sun May 26 15:47:57 2013] Set source signif. to 257.07/17.49 = 14.70
[Sun May 26 15:48:00 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 26 15:48:00 2013] Using photon index=1.80, rate=0.0383, arf fullrun_pn_xmm0411081401_pi300-10000_pass1_cl_src22.arf
[Sun May 26 15:48:00 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 26 15:48:00 2013] Updating source flux to 1.5e-13
[Sun May 26 15:48:42 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May 26 15:49:06 2013] xmm0411081401/analysis//spectral/fullrun_pn_xmm0411081401_pi300-10000_pass1_cl_src22_pl.csv not found, spectral fit skipped or did not complete