[Sat May 25 01:07:47 2013] Detection parameters:
  Position = (287.0, 331.6) = 11 4 33.57 38 12 58.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1467.4 +/- 54.3
  Background counts = 72.9
  Rate = 0.3 +/- 0.01

[Sat May 25 01:07:48 2013] Off-axis axis estimate = 2.54'
[Sat May 25 01:11:37 2013] Using EEF radius (= 7.70 ")to estimate initial spatial extent for simple fitting
[Sat May 25 01:11:37 2013] Initial guess for spatial extent in simple fitting = 7.70"
[Sat May 25 01:11:37 2013] source mask rpix=1.8, npix_max = 20, mask sum = 17, frac = 0.825
[Sat May 25 01:11:37 2013] Giving source the simple spatial ID 20 for pass 0, mean size = 7.70"
[Sat May 25 06:36:12 2013] fullrun_pn_xmm0411081401_pi300-10000_cl_pass0_src20.ximg exists
[Sat May 25 06:36:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0411081401_pi300-10000_cl_pass0_src20.csv
[Sat May 25 06:36:12 2013] fullrun_pn_xmm0411081401_pi300-10000_cl_pass0_src20_1.ximg exists
[Sat May 25 06:36:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0411081401_pi300-10000_cl_pass0_src20.csv
[Sat May 25 06:36:12 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0411081401_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0411081401_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 06:36:12 2013] fullrun_pn_xmm0411081401_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Sat May 25 06:36:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0411081401_pi300-10000_cl_pass0_tfrozen_src20.csv
[Sat May 25 06:36:12 2013] fullrun_pn_xmm0411081401_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Sat May 25 06:36:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0411081401_pi300-10000_cl_pass0_tfrozen_src20.csv
[Sat May 25 06:36:12 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0411081401_pi300-10000_cl_pass0_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0411081401_pi300-10000_cl_pass0_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 11:10:12 2013] Spatial fit model total counts = 13444.800000, observed total counts = 11617.000000
[Sat May 25 11:10:12 2013] Poor agreement between spatial fit and data for source 20
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 25 11:10:12 2013] Source 20 is offset by 3.801304 and -0.475488 pixels which is larger than
2 X fitted extent = 2.015264 x 2.015264, not incorporating fit results
[Sat May 25 11:10:12 2013] Vigneting correction estimate = 1.000000
[Sat May 25 11:10:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 11:10:12 2013] Assessing source extent using major
[Sat May 25 11:10:12 2013] Source does appear to be extended
[Sat May 25 11:10:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 25 11:10:34 2013] Using EEF radius (= 7.70 ")to estimate initial spatial extent for simple fitting
[Sat May 25 11:10:34 2013] Initial guess for spatial extent in simple fitting = 7.70"
[Sat May 25 11:10:34 2013] source mask rpix=1.8, npix_max = 20, mask sum = 17, frac = 0.825
[Sat May 25 11:10:34 2013] Giving source the simple spatial ID 18 for pass 1, mean size = 7.70"
[Sun May 26 02:00:20 2013] fullrun_pn_xmm0411081401_pi300-10000_cl_pass1_src18.ximg exists
[Sun May 26 02:00:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0411081401_pi300-10000_cl_pass1_src18.csv
[Sun May 26 02:00:20 2013] fullrun_pn_xmm0411081401_pi300-10000_cl_pass1_src18_1.ximg exists
[Sun May 26 02:00:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0411081401_pi300-10000_cl_pass1_src18.csv
[Sun May 26 02:00:20 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0411081401_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0411081401_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 26 02:00:20 2013] fullrun_pn_xmm0411081401_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Sun May 26 02:00:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0411081401_pi300-10000_cl_pass1_tfrozen_src18.csv
[Sun May 26 02:00:20 2013] fullrun_pn_xmm0411081401_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Sun May 26 02:00:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0411081401_pi300-10000_cl_pass1_tfrozen_src18.csv
[Sun May 26 02:00:20 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0411081401_pi300-10000_cl_pass1_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0411081401_pi300-10000_cl_pass1_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 26 06:16:05 2013] Spatial fit model total counts = 14972.500000, observed total counts = 11617.000000
[Sun May 26 06:16:05 2013] Poor agreement between spatial fit and data for source 20
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 26 06:16:05 2013] Vigneting correction estimate = 1.000000
[Sun May 26 06:16:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 26 06:16:05 2013] Assessing source extent using major
[Sun May 26 06:16:05 2013] Source does appear to be extended
[Sun May 26 06:16:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 26 06:16:35 2013] Counts = 1467.448608, rescaling region sizes by 2.000000
[Sun May 26 06:16:35 2013] XMMSAS src. selection expression = ellipse(24920.935425, 28796.582581, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sun May 26 06:16:35 2013] Writing source region out to fullrun_pn_xmm0411081401_pi300-10000_pass1_cl_src20_src.reg
[Sun May 26 06:16:35 2013] Extracting stamp from image fullrun_pn_xmm0411081401_pi300-10000_cl_sm2.00.img.gz, (212, 257) - (362, 407)
[Sun May 26 06:16:35 2013] XMMSAS bgd. selection expression = annulus(24920.935425, 28796.582581, 4350.000000, 8700.000000, X, Y) && !ellipse(26340.112240, 28252.380060, 3520.824101, 3444.144099, 228.628000, X, Y) && !ellipse(28060.326000, 25952.380000, 1191.096034, 425.120812, 52.086700, X, Y) && !ellipse(29015.567940, 24670.895000, 1663.656048, 407.068012, 52.814000, X, Y) && !ellipse(29517.863580, 23995.463200, 1705.896049, 407.266412, 52.162200, X, Y) && !ellipse(30373.182000, 22819.642000, 1813.960052, 700.190420, 53.530300, X, Y) && !ellipse(30682.362800, 22421.964200, 1417.528041, 396.436011, 53.156000, X, Y) && !ellipse(30971.188000, 22041.879600, 1446.672042, 411.737612, 232.335000, X, Y) && !ellipse(31296.596200, 21600.783400, 1487.048043, 396.549611, 232.514000, X, Y) && !ellipse(31720.265600, 21026.237400, 1944.416056, 433.090412, 52.696500, X, Y) && !ellipse(31980.456400, 20671.264400, 1975.544057, 432.261612, 52.850000, X, Y) && !ellipse(32762.905760, 19620.240400, 1648.872047, 425.984812, 52.625100, X, Y) && !ellipse(33321.105400, 18866.704200, 2134.264061, 449.822413, 52.415200, X, Y) && !ellipse(28324.264000, 25621.038000, 1171.112034, 496.093614, 51.798300, X, Y) && !ellipse(29908.603800, 23472.782400, 1722.600050, 406.614412, 52.439100, X, Y) && !ellipse(25804.138885, 29580.554321, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26295.677734, 29819.594574, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28589.126556, 30628.499695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27116.549072, 30427.628143, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24046.846680, 28152.698151, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24568.870575, 25451.651886, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22491.376620, 30940.168000, 500.654414, 407.894412, 310.993467, X, Y) && !ellipse(26414.082600, 24808.515000, 1127.456032, 1127.456032, 0.000000, X, Y) && !ellipse(23699.614000, 29268.704200, 1316.496038, 1316.496038, 0.000000, X, Y)
[Sun May 26 06:16:35 2013] Writing fullrun_pn_xmm0411081401_pi300-10000_pass1_cl_src20.gif
[Sun May 26 08:56:00 2013] Mean detx,y = (318.37, -680.63) 
[Sun May 26 08:56:07 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 26 08:59:18 2013] Binned source spectrum to 10 counts/bin
[Sun May 26 08:59:18 2013] Setting source spectrum file to fullrun_pn_xmm0411081401_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Sun May 26 08:59:18 2013] Setting bgd. spectrum file to fullrun_pn_xmm0411081401_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Sun May 26 10:51:07 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 26 10:51:07 2013] rmf not generated due to insufficient counts
[Sun May 26 15:47:56 2013] Updating aperture counts using extracted products
[Sun May 26 15:47:56 2013] Total counts from fullrun_pn_xmm0411081401_pi300-10000_pass1_cl_src20_src_b10.pi.gz = 84609.00
[Sun May 26 15:47:56 2013] Total counts from fullrun_pn_xmm0411081401_pi300-10000_pass1_cl_src20_bgd.pi.gz = 21414.00
[Sun May 26 15:47:56 2013] Got source and background scale factors 4448151.000000, 143261404.000000
[Sun May 26 15:47:56 2013] User source parameters:
  Position = (287.0, 331.6) = 11 4 33.57 38 12 58.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 83944.1 +/- 291.9
  Background aperture counts = 664.9
  Rate = 1e+01 +/- 0.04

[Sun May 26 15:47:56 2013] Updating counts from extracted products
[Sun May 26 15:47:56 2013] Set source signif. to 83944.11/25.79 = 3255.49
[Sun May 26 15:48:00 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 26 15:48:00 2013] Using photon index=1.80, rate=12.5, arf fullrun_pn_xmm0411081401_pi300-10000_pass1_cl_src20.arf
[Sun May 26 15:48:00 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 26 15:48:00 2013] Updating source flux to 3.5e-11
[Sun May 26 15:48:42 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May 26 15:49:06 2013] xmm0411081401/analysis//spectral/fullrun_pn_xmm0411081401_pi300-10000_pass1_cl_src20_pl.csv not found, spectral fit skipped or did not complete