[Sat May 25 01:08:52 2013] Detection parameters:
  Position = (292.6, 349.0) = 11 4 31.52 38 14 16.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 220.1 +/- 20.8
  Background counts = 23.1
  Rate = 0.03 +/- 0.003

[Sat May 25 01:08:53 2013] Off-axis axis estimate = 3.69'
[Sat May 25 09:25:04 2013] Using EEF radius (= 8.27 ")to estimate initial spatial extent for simple fitting
[Sat May 25 09:25:04 2013] Initial guess for spatial extent in simple fitting = 8.27"
[Sat May 25 09:25:04 2013] source mask rpix=1.9, npix_max = 23, mask sum = 19, frac = 0.823
[Sat May 25 09:25:04 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 8.27"
[Sat May 25 11:10:02 2013] fullrun_mos2_xmm0411081401_pi300-10000_cl_pass0_src4.ximg exists
[Sat May 25 11:10:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411081401_pi300-10000_cl_pass0_src4.csv
[Sat May 25 11:10:02 2013] fullrun_mos2_xmm0411081401_pi300-10000_cl_pass0_src4_1.ximg exists
[Sat May 25 11:10:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411081401_pi300-10000_cl_pass0_src4.csv
[Sat May 25 11:10:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0411081401_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0411081401_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 11:10:03 2013] fullrun_mos2_xmm0411081401_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sat May 25 11:10:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411081401_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sat May 25 11:10:03 2013] fullrun_mos2_xmm0411081401_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sat May 25 11:10:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411081401_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sat May 25 11:10:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0411081401_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0411081401_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 11:10:26 2013] Source 3 is offset by -1.583237 and 4.038109 pixels which is larger than
2 X fitted extent = 7.607173 x 1.116754, not incorporating fit results
[Sat May 25 11:10:26 2013] Vigneting correction estimate = 1.000000
[Sat May 25 11:10:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 11:10:26 2013] Assessing source extent using major
[Sat May 25 11:10:26 2013] Source does appear to be extended
[Sat May 25 11:10:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 26 03:37:06 2013] Using EEF radius (= 8.27 ")to estimate initial spatial extent for simple fitting
[Sun May 26 03:37:06 2013] Initial guess for spatial extent in simple fitting = 8.27"
[Sun May 26 03:37:06 2013] source mask rpix=1.9, npix_max = 23, mask sum = 19, frac = 0.823
[Sun May 26 03:37:06 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 8.27"
[Sun May 26 06:15:49 2013] fullrun_mos2_xmm0411081401_pi300-10000_cl_pass1_src4.ximg exists
[Sun May 26 06:15:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411081401_pi300-10000_cl_pass1_src4.csv
[Sun May 26 06:15:49 2013] fullrun_mos2_xmm0411081401_pi300-10000_cl_pass1_src4_1.ximg exists
[Sun May 26 06:15:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411081401_pi300-10000_cl_pass1_src4.csv
[Sun May 26 06:15:49 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0411081401_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0411081401_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 26 06:15:50 2013] fullrun_mos2_xmm0411081401_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Sun May 26 06:15:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411081401_pi300-10000_cl_pass1_tfrozen_src4.csv
[Sun May 26 06:15:50 2013] fullrun_mos2_xmm0411081401_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Sun May 26 06:15:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411081401_pi300-10000_cl_pass1_tfrozen_src4.csv
[Sun May 26 06:15:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0411081401_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0411081401_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 26 06:16:20 2013] Source 3 is offset by -1.621713 and 4.119948 pixels which is larger than
2 X fitted extent = 7.607173 x 1.100018, not incorporating fit results
[Sun May 26 06:16:20 2013] Vigneting correction estimate = 1.000000
[Sun May 26 06:16:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 26 06:16:20 2013] Assessing source extent using major
[Sun May 26 06:16:20 2013] Source does appear to be extended
[Sun May 26 06:16:20 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 26 13:49:28 2013] XMMSAS src. selection expression = ellipse(25404.142792, 30312.041443, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 26 13:49:28 2013] Writing source region out to fullrun_mos2_xmm0411081401_pi300-10000_pass1_cl_src3_src.reg
[Sun May 26 13:49:28 2013] Extracting stamp from image fullrun_mos2_xmm0411081401_pi300-10000_cl_sm2.00.img.gz, (255, 311) - (330, 386)
[Sun May 26 13:49:28 2013] XMMSAS bgd. selection expression = annulus(25404.142792, 30312.041443, 1087.500000, 2175.000000, X, Y) && !ellipse(26200.139160, 28031.735016, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(26634.995789, 28335.465057, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(24425.600000, 28095.397200, 1520.720044, 322.092809, -0.000000, X, Y) && !ellipse(22671.132000, 33095.860000, 1523.760044, 1523.760044, 0.000000, X, Y)
[Sun May 26 13:49:28 2013] Writing fullrun_mos2_xmm0411081401_pi300-10000_pass1_cl_src3.gif
[Sun May 26 14:10:41 2013] Mean detx,y = (-956.31, 2095.07) 
[Sun May 26 14:10:43 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 26 14:10:53 2013] Binned source spectrum to 10 counts/bin
[Sun May 26 14:10:53 2013] Setting source spectrum file to fullrun_mos2_xmm0411081401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun May 26 14:10:53 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0411081401_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sun May 26 14:33:20 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 26 14:33:20 2013] rmf not generated due to insufficient counts
[Sun May 26 15:48:05 2013] Updating aperture counts using extracted products
[Sun May 26 15:48:05 2013] Total counts from fullrun_mos2_xmm0411081401_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 760.00
[Sun May 26 15:48:05 2013] Total counts from fullrun_mos2_xmm0411081401_pi300-10000_pass1_cl_src3_bgd.pi.gz = 685.00
[Sun May 26 15:48:05 2013] Got source and background scale factors 1173296.000000, 5727476.000000
[Sun May 26 15:48:05 2013] User source parameters:
  Position = (292.6, 349.0) = 11 4 31.52 38 14 16.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 619.7 +/- 28.6
  Background aperture counts = 140.3
  Rate = 0.07 +/- 0.003

[Sun May 26 15:48:05 2013] Updating counts from extracted products
[Sun May 26 15:48:05 2013] Set source signif. to 619.68/11.85 = 52.31
[Sun May 26 15:48:10 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 26 15:48:10 2013] Using photon index=1.80, rate=0.072, arf fullrun_mos2_xmm0411081401_pi300-10000_pass1_cl_src3.arf
[Sun May 26 15:48:10 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 26 15:48:10 2013] Updating source flux to 7.7e-13
[Sun May 26 15:48:24 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May 26 15:48:42 2013] xmm0411081401/analysis//spectral/fullrun_mos2_xmm0411081401_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete