[Sat May 25 01:08:52 2013] Detection parameters:
  Position = (306.7, 326.3) = 11 4 26.30 38 12 33.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 35663.9 +/- 231.2
  Background counts = 29.9
  Rate = 5 +/- 0.03

[Sat May 25 01:08:53 2013] Off-axis axis estimate = 2.10'
[Sat May 25 09:25:04 2013] Using EEF radius (= 7.48 ")to estimate initial spatial extent for simple fitting
[Sat May 25 09:25:04 2013] Initial guess for spatial extent in simple fitting = 7.48"
[Sat May 25 09:25:04 2013] source mask rpix=1.7, npix_max = 19, mask sum = 11, frac = 0.558
[Sat May 25 09:25:04 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 7.48"
[Sat May 25 11:10:02 2013] fullrun_mos2_xmm0411081401_pi300-10000_cl_pass0_src2.ximg exists
[Sat May 25 11:10:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411081401_pi300-10000_cl_pass0_src2.csv
[Sat May 25 11:10:02 2013] fullrun_mos2_xmm0411081401_pi300-10000_cl_pass0_src2_1.ximg exists
[Sat May 25 11:10:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411081401_pi300-10000_cl_pass0_src2.csv
[Sat May 25 11:10:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0411081401_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0411081401_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 11:10:03 2013] fullrun_mos2_xmm0411081401_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sat May 25 11:10:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411081401_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sat May 25 11:10:03 2013] fullrun_mos2_xmm0411081401_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sat May 25 11:10:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411081401_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sat May 25 11:10:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0411081401_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0411081401_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 11:10:26 2013] Warning, spatial fit 2 centroid is now closest to src. 1
[Sat May 25 11:10:26 2013] Vigneting correction estimate = 1.000000
[Sat May 25 11:10:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 11:10:26 2013] Assessing source extent using major
[Sat May 25 11:10:26 2013] Source does appear to be extended
[Sat May 25 11:10:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 25 11:10:26 2013] Source is confused with source 1
[Sun May 26 03:37:06 2013] Using EEF radius (= 7.48 ")to estimate initial spatial extent for simple fitting
[Sun May 26 03:37:06 2013] Initial guess for spatial extent in simple fitting = 7.48"
[Sun May 26 03:37:06 2013] source mask rpix=1.7, npix_max = 19, mask sum = 11, frac = 0.558
[Sun May 26 03:37:06 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 7.48"
[Sun May 26 06:15:49 2013] fullrun_mos2_xmm0411081401_pi300-10000_cl_pass1_src2.ximg exists
[Sun May 26 06:15:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411081401_pi300-10000_cl_pass1_src2.csv
[Sun May 26 06:15:49 2013] fullrun_mos2_xmm0411081401_pi300-10000_cl_pass1_src2_1.ximg exists
[Sun May 26 06:15:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411081401_pi300-10000_cl_pass1_src2.csv
[Sun May 26 06:15:49 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0411081401_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0411081401_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 26 06:15:49 2013] fullrun_mos2_xmm0411081401_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sun May 26 06:15:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411081401_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sun May 26 06:15:49 2013] fullrun_mos2_xmm0411081401_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sun May 26 06:15:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411081401_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sun May 26 06:15:49 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0411081401_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0411081401_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 26 06:16:20 2013] Warning, spatial fit 2 centroid is now closest to src. 1
[Sun May 26 06:16:20 2013] Vigneting correction estimate = 1.000000
[Sun May 26 06:16:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 26 06:16:20 2013] Assessing source extent using major
[Sun May 26 06:16:20 2013] Source does appear to be extended
[Sun May 26 06:16:20 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 26 13:49:28 2013] Counts = 35663.914062, rescaling region sizes by 3.000000
[Sun May 26 13:49:28 2013] XMMSAS src. selection expression = ellipse(26634.995789, 28335.465057, 1957.500000, 1957.500000, 0.000000, X, Y)
[Sun May 26 13:49:28 2013] Writing source region out to fullrun_mos2_xmm0411081401_pi300-10000_pass1_cl_src2_src.reg
[Sun May 26 13:49:28 2013] Extracting stamp from image fullrun_mos2_xmm0411081401_pi300-10000_cl_sm2.00.img.gz, (194, 214) - (419, 439)
[Sun May 26 13:49:28 2013] XMMSAS bgd. selection expression = annulus(26634.995789, 28335.465057, 9787.500000, 19575.000000, X, Y) && !ellipse(26200.139160, 28031.735016, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(22476.916460, 30931.783000, 459.141613, 319.951209, 313.123642, X, Y) && !ellipse(25404.142792, 30312.041443, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24006.561920, 27064.353851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28245.160000, 25081.454000, 2398.976069, 1632.560047, 149.538000, X, Y) && !ellipse(27832.540000, 25760.718000, 1199.488035, 1199.488035, 0.000000, X, Y) && !ellipse(29441.256000, 24066.884000, 1264.680036, 784.927223, 38.178300, X, Y) && !ellipse(28683.880000, 24427.289600, 1264.680036, 1264.680036, 0.000000, X, Y) && !ellipse(24425.600000, 28095.397200, 1520.720044, 322.092809, -0.000000, X, Y) && !ellipse(24132.213837, 25971.036682, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26151.456543, 25114.808319, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28530.336000, 25237.726000, 1001.512029, 1001.512029, 0.000000, X, Y) && !ellipse(29887.981600, 23469.747200, 2212.768064, 833.592024, 52.325600, X, Y) && !ellipse(21184.078820, 30920.116000, 554.563216, 216.633606, 142.627273, X, Y) && !ellipse(22282.084000, 26353.901800, 336.216810, 336.216810, 0.000000, X, Y) && !ellipse(30149.874000, 23146.212000, 1917.392055, 1917.392055, 0.000000, X, Y) && !ellipse(30713.123800, 26825.631200, 1361.568039, 1361.568039, 0.000000, X, Y) && !ellipse(29756.076000, 27136.436000, 1333.456038, 1333.456038, 0.000000, X, Y) && !ellipse(22671.132000, 33095.860000, 1523.760044, 1523.760044, 0.000000, X, Y) && !ellipse(18368.303600, 39181.151200, 2764.776080, 627.960818, 53.799200, X, Y) && !ellipse(24688.256622, 25047.885651, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19127.886000, 38044.698000, 3690.304106, 649.852019, 54.035000, X, Y) && !ellipse(19693.978000, 37278.818000, 1845.152053, 1845.152053, 0.000000, X, Y)
[Sun May 26 13:49:28 2013] Writing fullrun_mos2_xmm0411081401_pi300-10000_pass1_cl_src2.gif
[Sun May 26 14:00:00 2013] Mean detx,y = (-557.28, -86.31) 
[Sun May 26 14:00:04 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 26 14:10:11 2013] Binned source spectrum to 10 counts/bin
[Sun May 26 14:10:12 2013] Setting source spectrum file to fullrun_mos2_xmm0411081401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun May 26 14:10:12 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0411081401_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sun May 26 14:24:34 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 26 14:24:34 2013] rmf not generated due to insufficient counts
[Sun May 26 15:48:04 2013] Updating aperture counts using extracted products
[Sun May 26 15:48:04 2013] Total counts from fullrun_mos2_xmm0411081401_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 147972.00
[Sun May 26 15:48:04 2013] Total counts from fullrun_mos2_xmm0411081401_pi300-10000_pass1_cl_src2_bgd.pi.gz = 11710.00
[Sun May 26 15:48:04 2013] Got source and background scale factors 11428080.000000, 551313496.000000
[Sun May 26 15:48:04 2013] User source parameters:
  Position = (306.7, 326.3) = 11 4 26.30 38 12 33.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 147729.3 +/- 385.7
  Background aperture counts = 242.7
  Rate = 2e+01 +/- 0.04

[Sun May 26 15:48:04 2013] Updating counts from extracted products
[Sun May 26 15:48:04 2013] Set source signif. to 147729.27/15.58 = 9482.02
[Sun May 26 15:48:10 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 26 15:48:10 2013] Using photon index=1.80, rate=17.2, arf fullrun_mos2_xmm0411081401_pi300-10000_pass1_cl_src2.arf
[Sun May 26 15:48:10 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 26 15:48:10 2013] Updating source flux to 1.6e-10
[Sun May 26 15:48:24 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May 26 15:48:42 2013] xmm0411081401/analysis//spectral/fullrun_mos2_xmm0411081401_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete