[Sat May 25 01:08:52 2013] Detection parameters:
  Position = (263.7, 376.4) = 11 4 42.17 38 16 14.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 32.3 +/- 7.6
  Background counts = 9.4
  Rate = 0.006 +/- 0.001

[Sat May 25 01:08:53 2013] Off-axis axis estimate = 6.19'
[Sat May 25 09:25:04 2013] Using EEF radius (= 9.52 ")to estimate initial spatial extent for simple fitting
[Sat May 25 09:25:04 2013] Initial guess for spatial extent in simple fitting = 9.52"
[Sat May 25 09:25:04 2013] source mask rpix=2.2, npix_max = 28, mask sum = 18, frac = 0.622
[Sat May 25 09:25:04 2013] Giving source the simple spatial ID 26 for pass 0, mean size = 9.52"
[Sat May 25 11:10:03 2013] fullrun_mos2_xmm0411081401_pi300-10000_cl_pass0_src26.ximg exists
[Sat May 25 11:10:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411081401_pi300-10000_cl_pass0_src26.csv
[Sat May 25 11:10:03 2013] fullrun_mos2_xmm0411081401_pi300-10000_cl_pass0_src26_1.ximg exists
[Sat May 25 11:10:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411081401_pi300-10000_cl_pass0_src26.csv
[Sat May 25 11:10:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0411081401_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0411081401_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 11:10:03 2013] fullrun_mos2_xmm0411081401_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Sat May 25 11:10:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411081401_pi300-10000_cl_pass0_tfrozen_src26.csv
[Sat May 25 11:10:03 2013] fullrun_mos2_xmm0411081401_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Sat May 25 11:10:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411081401_pi300-10000_cl_pass0_tfrozen_src26.csv
[Sat May 25 11:10:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0411081401_pi300-10000_cl_pass0_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0411081401_pi300-10000_cl_pass0_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 11:10:26 2013] Spatial fit model total counts = 203.823000, observed total counts = 182.000000
[Sat May 25 11:10:26 2013] Poor agreement between spatial fit and data for source 18
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 25 11:10:26 2013] Vigneting correction estimate = 1.000000
[Sat May 25 11:10:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 11:10:26 2013] Assessing source extent using major
[Sat May 25 11:10:26 2013] Source does appear to be extended
[Sat May 25 11:10:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 26 03:37:06 2013] Using EEF radius (= 9.52 ")to estimate initial spatial extent for simple fitting
[Sun May 26 03:37:06 2013] Initial guess for spatial extent in simple fitting = 9.52"
[Sun May 26 03:37:06 2013] source mask rpix=2.2, npix_max = 28, mask sum = 18, frac = 0.622
[Sun May 26 03:37:06 2013] Giving source the simple spatial ID 22 for pass 1, mean size = 9.52"
[Sun May 26 06:15:49 2013] fullrun_mos2_xmm0411081401_pi300-10000_cl_pass1_src22.ximg exists
[Sun May 26 06:15:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411081401_pi300-10000_cl_pass1_src22.csv
[Sun May 26 06:15:49 2013] fullrun_mos2_xmm0411081401_pi300-10000_cl_pass1_src22_1.ximg exists
[Sun May 26 06:15:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411081401_pi300-10000_cl_pass1_src22.csv
[Sun May 26 06:15:49 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0411081401_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0411081401_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 26 06:15:50 2013] fullrun_mos2_xmm0411081401_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Sun May 26 06:15:50 2013] fullrun_mos2_xmm0411081401_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Sun May 26 06:15:50 2013] Fit fullrun_mos2_xmm0411081401_pi300-10000_cl_pass1_tfrozen_src22 appears to have run properly
[Sun May 26 06:16:20 2013] Spatial fit model total counts = 197.627000, observed total counts = 182.000000
[Sun May 26 06:16:20 2013] Offset between fit and detection position for source 18 = 5.214711 pixels
[Sun May 26 06:16:20 2013] 195.950580 total counts/ 5.003580 bgd. counts: snr = 85.363540
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 5.214711 pixels
  Position = (261.1, 381.0) = 11 4 43.13 38 16 35.3
  Extent = 19.0 (19.0-38.1)", rotation angle = 0
  Source counts = 190.9 +/- 14.0
  Background counts = 5.0
  Rate = 0.02 +/- 0.002
[Sun May 26 06:16:20 2013] Vigneting correction estimate = 1.000000
[Sun May 26 06:16:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 26 06:16:20 2013] Assessing source extent using major axis lower bound
[Sun May 26 06:16:20 2013] Source does appear to be extended
[Sun May 26 06:16:20 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 26 13:49:28 2013] XMMSAS src. selection expression = ellipse(22671.132000, 33095.860000, 1142.820033, 1142.820033, 0.000000, X, Y)
[Sun May 26 13:49:28 2013] Writing source region out to fullrun_mos2_xmm0411081401_pi300-10000_pass1_cl_src18_src.reg
[Sun May 26 13:49:28 2013] Extracting stamp from image fullrun_mos2_xmm0411081401_pi300-10000_cl_sm2.00.img.gz, (195, 315) - (327, 447)
[Sun May 26 13:49:28 2013] XMMSAS bgd. selection expression = annulus(22671.132000, 33095.860000, 1904.700055, 3809.400110, X, Y) && !ellipse(26200.139160, 28031.735016, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(26634.995789, 28335.465057, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(22476.916460, 30931.783000, 459.141613, 319.951209, 313.123642, X, Y) && !ellipse(25404.142792, 30312.041443, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24425.600000, 28095.397200, 1520.720044, 322.092809, -0.000000, X, Y) && !ellipse(21184.078820, 30920.116000, 554.563216, 216.633606, 142.627273, X, Y) && !ellipse(18368.303600, 39181.151200, 2764.776080, 627.960818, 53.799200, X, Y) && !ellipse(19127.886000, 38044.698000, 3690.304106, 649.852019, 54.035000, X, Y) && !ellipse(19693.978000, 37278.818000, 1845.152053, 1845.152053, 0.000000, X, Y)
[Sun May 26 13:49:28 2013] Writing fullrun_mos2_xmm0411081401_pi300-10000_pass1_cl_src18.gif
[Sun May 26 14:18:18 2013] Mean detx,y = (-443.55, 5966.28) 
[Sun May 26 14:18:19 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 26 14:19:12 2013] Binned source spectrum to 10 counts/bin
[Sun May 26 14:19:12 2013] Setting source spectrum file to fullrun_mos2_xmm0411081401_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Sun May 26 14:19:12 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0411081401_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Sun May 26 15:48:09 2013] Updating aperture counts using extracted products
[Sun May 26 15:48:09 2013] Total counts from fullrun_mos2_xmm0411081401_pi300-10000_pass1_cl_src18_src_b10.pi.gz = 287.00
[Sun May 26 15:48:09 2013] Total counts from fullrun_mos2_xmm0411081401_pi300-10000_pass1_cl_src18_bgd.pi.gz = 1466.00
[Sun May 26 15:48:09 2013] Got source and background scale factors 3121424.000000, 29047674.000000
[Sun May 26 15:48:09 2013] User source parameters:
  Position = (261.1, 381.0) = 11 4 43.13 38 16 35.3
  Extent = 19.0 (19.0-38.1)", rotation angle = 0
  Source aperture counts = 129.5 +/- 18.0
  Background aperture counts = 157.5
  Rate = 0.02 +/- 0.002

[Sun May 26 15:48:11 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 26 15:48:11 2013] Using photon index=1.80, rate=0.0222, arf fullrun_mos2_xmm0411081401_pi300-10000_pass1_cl_src18.arf
[Sun May 26 15:48:11 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 26 15:48:11 2013] Updating source flux to 4.6e-13
[Sun May 26 15:48:24 2013] Flag p found in src. 18 procflags, skipping spectral fitting
[Sun May 26 15:48:42 2013] xmm0411081401/analysis//spectral/fullrun_mos2_xmm0411081401_pi300-10000_pass1_cl_src18_pl.csv not found, spectral fit skipped or did not complete