[Sat May 25 01:08:52 2013] Detection parameters:
  Position = (255.5, 389.9) = 11 4 45.20 38 17 16.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 41.2 +/- 8.1
  Background counts = 6.3
  Rate = 0.008 +/- 0.002

[Sat May 25 01:08:53 2013] Off-axis axis estimate = 7.32'
[Sat May 25 09:25:04 2013] Using EEF radius (= 10.09 ")to estimate initial spatial extent for simple fitting
[Sat May 25 09:25:04 2013] Initial guess for spatial extent in simple fitting = 10.09"
[Sat May 25 09:25:04 2013] source mask rpix=2.3, npix_max = 31, mask sum = 24, frac = 0.755
[Sat May 25 09:25:04 2013] Giving source the simple spatial ID 14 for pass 0, mean size = 10.09"
[Sat May 25 11:10:02 2013] fullrun_mos2_xmm0411081401_pi300-10000_cl_pass0_src14.ximg exists
[Sat May 25 11:10:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411081401_pi300-10000_cl_pass0_src14.csv
[Sat May 25 11:10:02 2013] fullrun_mos2_xmm0411081401_pi300-10000_cl_pass0_src14_1.ximg exists
[Sat May 25 11:10:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411081401_pi300-10000_cl_pass0_src14.csv
[Sat May 25 11:10:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0411081401_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0411081401_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 11:10:03 2013] fullrun_mos2_xmm0411081401_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Sat May 25 11:10:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411081401_pi300-10000_cl_pass0_tfrozen_src14.csv
[Sat May 25 11:10:03 2013] fullrun_mos2_xmm0411081401_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Sat May 25 11:10:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411081401_pi300-10000_cl_pass0_tfrozen_src14.csv
[Sat May 25 11:10:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0411081401_pi300-10000_cl_pass0_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0411081401_pi300-10000_cl_pass0_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 11:10:26 2013] Warning, spatial fit 14 centroid is now closest to src. 16
[Sat May 25 11:10:26 2013] Spatial fit model total counts = 127.624000, observed total counts = 117.000000
[Sat May 25 11:10:26 2013] Offset between fit and detection position for source 17 = 1.433610 pixels
[Sat May 25 11:10:26 2013] Warning, changing simple spatial fit ID from 14 to 28
[Sat May 25 11:10:26 2013] 132.156890 total counts/ 129.084000 bgd. counts: snr = 0.270465
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 1.433610 pixels
  Position = (256.6, 388.9) = 11 4 44.81 38 17 9.9
  Extent = 2.6 (2.6-2.8)", rotation angle = 0
  Source counts = 3.1 +/- 11.5
  Background counts = 129.1
  Rate = 0.0004 +/- 0.001
  Deleting source due to low Poisson probability