[Mon Aug 6 17:58:22 2012] Detection parameters: Position = (375.9, 216.9) = 11 3 58.83 38 4 58.6 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 6692.7 +/- 99.7 Background counts = 68.0 Rate = 0.4 +/- 0.006 [Mon Aug 6 17:58:22 2012] Off-axis axis estimate = 8.15' [Mon Aug 6 18:03:43 2012] Using EEF radius (= 10.50 ")to estimate initial spatial extent for simple fitting [Mon Aug 6 18:03:43 2012] Initial guess for spatial extent in simple fitting = 10.50" [Mon Aug 6 18:03:43 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.059 [Mon Aug 6 18:03:43 2012] Giving source the simple spatial ID 41 for pass 0, mean size = 10.50" [Tue Aug 7 03:07:05 2012] fullrun_pn_xmm0411081301_pi300-10000_cl_pass0_src41.ximg exists [Tue Aug 7 03:07:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0411081301_pi300-10000_cl_pass0_src41.csv [Tue Aug 7 03:07:05 2012] fullrun_pn_xmm0411081301_pi300-10000_cl_pass0_src41_1.ximg exists [Tue Aug 7 03:07:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0411081301_pi300-10000_cl_pass0_src41.csv [Tue Aug 7 03:07:05 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0411081301_pi300-10000_cl_pass0_src41_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0411081301_pi300-10000_cl_pass0_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Aug 7 03:07:06 2012] fullrun_pn_xmm0411081301_pi300-10000_cl_pass0_tfrozen_src41.ximg exists [Tue Aug 7 03:07:06 2012] fullrun_pn_xmm0411081301_pi300-10000_cl_pass0_tfrozen_src41_1.ximg exists [Tue Aug 7 03:07:06 2012] Fit fullrun_pn_xmm0411081301_pi300-10000_cl_pass0_tfrozen_src41 appears to have run properly [Tue Aug 7 11:40:07 2012] Warning, spatial fit 41 centroid is now closest to src. 46 [Tue Aug 7 11:40:07 2012] Spatial fit model total counts = 18445.200000, observed total counts = 17694.000000 [Tue Aug 7 11:40:07 2012] Offset between fit and detection position for source 44 = 0.571950 pixels [Tue Aug 7 11:40:07 2012] Warning, changing simple spatial fit ID from 41 to 43 [Tue Aug 7 11:40:07 2012] 18227.800000 total counts/ 8209.800000 bgd. counts: snr = 110.564254 Spatial fit parameters: Offset between fit and detection position for source 44 = 0.571950 pixels Position = (376.3, 216.5) = 11 3 58.71 38 4 56.9 Extent = 14.2 (14.2-14.2)", rotation angle = 0 Source counts = 10018.0 +/- 135.0 Background counts = 8209.8 Rate = 0.7 +/- 0.009 [Tue Aug 7 11:40:07 2012] Vigneting correction estimate = 1.000000 [Tue Aug 7 11:40:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue Aug 7 11:40:07 2012] Assessing source extent using major axis lower bound [Tue Aug 7 11:40:07 2012] Source does appear to be extended [Tue Aug 7 11:40:07 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Tue Aug 7 11:40:07 2012] Source is confused with source 43 [Tue Aug 7 11:40:54 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Tue Aug 7 11:40:54 2012] Initial guess for spatial extent in simple fitting = 14.16" [Tue Aug 7 11:40:54 2012] source mask rpix=3.3, npix_max = 56, mask sum = 49, frac = 0.869 [Tue Aug 7 11:40:54 2012] Giving source the simple spatial ID 34 for pass 1, mean size = 14.16" [Tue Aug 7 20:54:58 2012] fullrun_pn_xmm0411081301_pi300-10000_cl_pass1_src34.ximg exists [Tue Aug 7 20:54:58 2012] fullrun_pn_xmm0411081301_pi300-10000_cl_pass1_src34_1.ximg exists [Tue Aug 7 20:54:58 2012] Fit fullrun_pn_xmm0411081301_pi300-10000_cl_pass1_src34 appears to have run properly [Tue Aug 7 20:54:59 2012] fullrun_pn_xmm0411081301_pi300-10000_cl_pass1_tfrozen_src34.ximg exists [Tue Aug 7 20:54:59 2012] fullrun_pn_xmm0411081301_pi300-10000_cl_pass1_tfrozen_src34_1.ximg exists [Tue Aug 7 20:54:59 2012] Fit fullrun_pn_xmm0411081301_pi300-10000_cl_pass1_tfrozen_src34 appears to have run properly [Wed Aug 8 01:59:36 2012] Spatial fit model total counts = 18850.800000, observed total counts = 18865.000000 [Wed Aug 8 01:59:36 2012] Offset between fit and detection position for source 44 = 0.240916 pixels [Wed Aug 8 01:59:36 2012] 18906.120000 total counts/ 4041.620000 bgd. counts: snr = 233.815106 Spatial fit parameters: Offset between fit and detection position for source 44 = 0.240916 pixels Position = (376.1, 216.6) = 11 3 58.78 38 4 57.4 Extent = 28.3 (28.3-56.6)" x 5.7 (5.6-5.8)", rotation angle = 53 (52-53) degrees Source counts = 14864.5 +/- 137.5 Background counts = 4041.6 Rate = 1 +/- 0.01 [Wed Aug 8 01:59:36 2012] Vigneting correction estimate = 1.000000 [Wed Aug 8 01:59:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Aug 8 01:59:36 2012] Assessing source extent using major axis lower bound [Wed Aug 8 01:59:36 2012] Source does appear to be extended [Wed Aug 8 01:59:36 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 4.85 [Wed Aug 8 01:59:36 2012] Source is asymmetric [Wed Aug 8 02:00:18 2012] Counts = 14864.500000, rescaling region sizes by 3.000000 [Wed Aug 8 02:00:18 2012] XMMSAS src. selection expression = ellipse(32668.247120, 18796.349400, 5097.996147, 1031.238030, 52.533000, X, Y) [Wed Aug 8 02:00:18 2012] Writing source region out to fullrun_pn_xmm0411081301_pi300-10000_pass1_cl_src44_src.reg [Wed Aug 8 02:00:18 2012] Extracting stamp from image fullrun_pn_xmm0411081301_pi300-10000_cl_sm2.00.img.gz, (83, 0) - (595, 510) [Wed Aug 8 02:00:18 2012] XMMSAS bgd. selection expression = annulus(32668.247120, 18796.349400, 25489.980733, 50979.961467, X, Y) && !ellipse(25922.570382, 27898.467200, 3587.184103, 3587.184103, 0.000000, X, Y) && !ellipse(28064.094513, 37801.178162, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33744.941223, 34304.555023, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25488.129333, 32576.324768, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25728.240400, 31161.756000, 1420.120041, 824.280024, 82.507570, X, Y) && !ellipse(24634.104645, 30689.082153, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25106.415771, 30173.164825, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22032.373400, 30614.205400, 429.108012, 429.108012, 0.000000, X, Y) && !ellipse(26679.956055, 30090.431458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25824.970245, 29589.984985, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31442.507782, 29480.353516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29330.546143, 29402.728424, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24955.934021, 28868.661316, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24483.168884, 28513.006866, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23744.247681, 27863.217651, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23530.488617, 26687.196320, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27507.564000, 25777.482000, 3498.312101, 3498.312101, 0.000000, X, Y) && !ellipse(24244.216248, 25838.720642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27830.158000, 25361.114000, 7507.560216, 7507.560216, 0.000000, X, Y) && !ellipse(24894.247070, 24881.396729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28192.634000, 24841.356000, 3498.312101, 3498.312101, 0.000000, X, Y) && !ellipse(28562.176000, 24323.588000, 3605.784104, 3605.784104, 0.000000, X, Y) && !ellipse(28936.502000, 23835.126000, 3725.616107, 3725.616107, 0.000000, X, Y) && !ellipse(26592.422394, 24060.076691, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29813.732000, 22680.430000, 5662.656163, 5662.656163, 0.000000, X, Y) && !ellipse(30577.692000, 21604.254000, 4703.112135, 4703.112135, 0.000000, X, Y) && !ellipse(31006.712927, 21054.186023, 4952.040142, 1267.299433, 233.145758, X, Y) && !ellipse(31488.266000, 20397.618000, 3986.640115, 3986.640115, 0.000000, X, Y) && !ellipse(32363.774568, 19182.922384, 6797.328196, 1375.656969, 52.687469, X, Y) && !ellipse(33735.118000, 17367.293320, 6931.416199, 1354.812039, 52.480300, X, Y) && !ellipse(34158.190600, 16794.993200, 1867.440054, 443.030413, 52.790800, X, Y) [Wed Aug 8 02:00:18 2012] Writing fullrun_pn_xmm0411081301_pi300-10000_pass1_cl_src44.gif [Wed Aug 8 04:21:34 2012] Mean detx,y = (136.75, 11199.16) [Wed Aug 8 04:21:37 2012] Setting backscal keywords in source and bgd. spectrum [Wed Aug 8 04:26:25 2012] Binned source spectrum to 10 counts/bin [Wed Aug 8 04:26:26 2012] Setting source spectrum file to fullrun_pn_xmm0411081301_pi300-10000_pass1_cl_src44_src_b10.pi.gz [Wed Aug 8 04:26:26 2012] Setting bgd. spectrum file to fullrun_pn_xmm0411081301_pi300-10000_pass1_cl_src44_bgd.pi.gz [Thu Aug 9 04:35:25 2012] Updating aperture counts using extracted products [Thu Aug 9 04:35:25 2012] Error reading totcts from fullrun_pn_xmm0411081301_pi300-10000_pass1_cl_src44_src_b10.pi.gz [Thu Aug 9 04:35:27 2012] Calculating source flux in energy range 0.30-8.00 [Thu Aug 9 04:35:27 2012] Using photon index=1.80, rate=1.04, arf fullrun_pn_xmm0411081301_pi300-10000_pass1_cl_src44.arf [Thu Aug 9 04:35:27 2012] Assuming count rate is from the 0.30-10.00 bandpass [Thu Aug 9 04:35:27 2012] Updating source flux to 4.2e-12 [Thu Aug 9 04:41:04 2012] Flag c found in src. 44 procflags, skipping spectral fitting