[Mon Aug  6 17:58:22 2012] Detection parameters:
  Position = (353.0, 248.0) = 11 4 7.28 38 7 13.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 6311.4 +/- 97.9
  Background counts = 92.1
  Rate = 0.6 +/- 0.01

[Mon Aug  6 17:58:22 2012] Off-axis axis estimate = 5.39'
[Mon Aug  6 18:03:43 2012] Using EEF radius (= 9.12 ")to estimate initial spatial extent for simple fitting
[Mon Aug  6 18:03:43 2012] Initial guess for spatial extent in simple fitting = 9.12"
[Mon Aug  6 18:03:43 2012] source mask rpix=2.1, npix_max = 26, mask sum = 36, frac = 1.334
[Mon Aug  6 18:03:43 2012] Giving source the simple spatial ID 36 for pass 0, mean size = 9.12"
[Tue Aug  7 03:07:05 2012] fullrun_pn_xmm0411081301_pi300-10000_cl_pass0_src36.ximg exists
[Tue Aug  7 03:07:05 2012] fullrun_pn_xmm0411081301_pi300-10000_cl_pass0_src36_1.ximg exists
[Tue Aug  7 03:07:05 2012] Fit fullrun_pn_xmm0411081301_pi300-10000_cl_pass0_src36 appears to have run properly
[Tue Aug  7 03:07:06 2012] fullrun_pn_xmm0411081301_pi300-10000_cl_pass0_tfrozen_src36.ximg exists
[Tue Aug  7 03:07:06 2012] fullrun_pn_xmm0411081301_pi300-10000_cl_pass0_tfrozen_src36_1.ximg exists
[Tue Aug  7 03:07:06 2012] Fit fullrun_pn_xmm0411081301_pi300-10000_cl_pass0_tfrozen_src36 appears to have run properly
[Tue Aug  7 11:40:07 2012] Spatial fit model total counts = 14639.200000, observed total counts = 14884.000000
[Tue Aug  7 11:40:07 2012] Offset between fit and detection position for source 39 = 6.514917 pixels
[Tue Aug  7 11:40:07 2012] 14284.193000 total counts/ 356.393000 bgd. counts: snr = 737.764815
Spatial fit parameters:
  Offset between fit and detection position for source 39 = 6.514917 pixels
  Position = (348.8, 253.0) = 11 4 8.81 38 7 35.8
  Extent = 18.2 (18.2-36.5)" x 11.0 (11.0-11.0)", rotation angle = 51 (51-51) degrees
  Source counts = 13927.8 +/- 119.5
  Background counts = 356.4
  Rate = 1 +/- 0.008
[Tue Aug  7 11:40:07 2012] Vigneting correction estimate = 1.000000
[Tue Aug  7 11:40:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug  7 11:40:07 2012] Assessing source extent using major axis lower bound
[Tue Aug  7 11:40:07 2012] Source does appear to be extended
[Tue Aug  7 11:40:07 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.66
[Tue Aug  7 11:40:07 2012] Source is asymmetric
[Tue Aug  7 11:40:07 2012] Source is confused with source 40
[Tue Aug  7 11:40:54 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Aug  7 11:40:54 2012] Initial guess for spatial extent in simple fitting = 14.61"
[Tue Aug  7 11:40:54 2012] source mask rpix=3.4, npix_max = 59, mask sum = 64, frac = 1.075
[Tue Aug  7 11:40:54 2012] Giving source the simple spatial ID 30 for pass 1, mean size = 14.61"
[Tue Aug  7 20:54:58 2012] fullrun_pn_xmm0411081301_pi300-10000_cl_pass1_src30.ximg exists
[Tue Aug  7 20:54:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0411081301_pi300-10000_cl_pass1_src30.csv
[Tue Aug  7 20:54:58 2012] fullrun_pn_xmm0411081301_pi300-10000_cl_pass1_src30_1.ximg exists
[Tue Aug  7 20:54:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0411081301_pi300-10000_cl_pass1_src30.csv
[Tue Aug  7 20:54:58 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0411081301_pi300-10000_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0411081301_pi300-10000_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug  7 20:54:59 2012] fullrun_pn_xmm0411081301_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Tue Aug  7 20:54:59 2012] fullrun_pn_xmm0411081301_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Tue Aug  7 20:54:59 2012] Fit fullrun_pn_xmm0411081301_pi300-10000_cl_pass1_tfrozen_src30 appears to have run properly
[Wed Aug  8 01:59:36 2012] Warning, spatial fit 30 centroid is now closest to src. 38
[Wed Aug  8 01:59:36 2012] Spatial fit model total counts = 17047.700000, observed total counts = 17207.000000
[Wed Aug  8 01:59:36 2012] Offset between fit and detection position for source 39 = 5.204794 pixels
[Wed Aug  8 01:59:36 2012] Warning, changing simple spatial fit ID from 30 to 31
[Wed Aug  8 01:59:36 2012] 16973.070000 total counts/ 2143.370000 bgd. counts: snr = 320.319805
Spatial fit parameters:
  Offset between fit and detection position for source 39 = 5.204794 pixels
  Position = (352.0, 248.9) = 11 4 7.63 38 7 17.9
  Extent = 19.6 (19.5-19.8)", rotation angle = 0
  Source counts = 14829.7 +/- 130.3
  Background counts = 2143.4
  Rate = 1 +/- 0.009
[Wed Aug  8 01:59:36 2012] Vigneting correction estimate = 1.000000
[Wed Aug  8 01:59:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  8 01:59:36 2012] Assessing source extent using major axis lower bound
[Wed Aug  8 01:59:36 2012] Source does appear to be extended
[Wed Aug  8 01:59:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  8 02:00:17 2012] Counts = 14829.700000, rescaling region sizes by 3.000000
[Wed Aug  8 02:00:17 2012] XMMSAS src. selection expression = ellipse(30577.692000, 21604.254000, 3527.334101, 3527.334101, 0.000000, X, Y)
[Wed Aug  8 02:00:17 2012] Writing source region out to fullrun_pn_xmm0411081301_pi300-10000_pass1_cl_src39_src.reg
[Wed Aug  8 02:00:17 2012] Extracting stamp from image fullrun_pn_xmm0411081301_pi300-10000_cl_sm2.00.img.gz, (149, 46) - (555, 452)
[Wed Aug  8 02:00:17 2012] XMMSAS bgd. selection expression = annulus(30577.692000, 21604.254000, 17636.670507, 35273.341015, X, Y) && !ellipse(25922.570382, 27898.467200, 3587.184103, 3587.184103, 0.000000, X, Y) && !ellipse(28064.094513, 37801.178162, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33744.941223, 34304.555023, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25488.129333, 32576.324768, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25728.240400, 31161.756000, 1420.120041, 824.280024, 82.507570, X, Y) && !ellipse(24634.104645, 30689.082153, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25106.415771, 30173.164825, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22032.373400, 30614.205400, 429.108012, 429.108012, 0.000000, X, Y) && !ellipse(26679.956055, 30090.431458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25824.970245, 29589.984985, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31442.507782, 29480.353516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29330.546143, 29402.728424, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24955.934021, 28868.661316, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24483.168884, 28513.006866, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23744.247681, 27863.217651, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23530.488617, 26687.196320, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27507.564000, 25777.482000, 3498.312101, 3498.312101, 0.000000, X, Y) && !ellipse(24244.216248, 25838.720642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27830.158000, 25361.114000, 7507.560216, 7507.560216, 0.000000, X, Y) && !ellipse(24894.247070, 24881.396729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28192.634000, 24841.356000, 3498.312101, 3498.312101, 0.000000, X, Y) && !ellipse(28562.176000, 24323.588000, 3605.784104, 3605.784104, 0.000000, X, Y) && !ellipse(28936.502000, 23835.126000, 3725.616107, 3725.616107, 0.000000, X, Y) && !ellipse(26592.422394, 24060.076691, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29813.732000, 22680.430000, 5662.656163, 5662.656163, 0.000000, X, Y) && !ellipse(31006.712927, 21054.186023, 4952.040142, 1267.299433, 233.145758, X, Y) && !ellipse(31488.266000, 20397.618000, 3986.640115, 3986.640115, 0.000000, X, Y) && !ellipse(32363.774568, 19182.922384, 6797.328196, 1375.656969, 52.687469, X, Y) && !ellipse(32668.247120, 18796.349400, 6797.328196, 1374.984040, 52.533000, X, Y) && !ellipse(33735.118000, 17367.293320, 6931.416199, 1354.812039, 52.480300, X, Y) && !ellipse(34158.190600, 16794.993200, 1867.440054, 443.030413, 52.790800, X, Y)
[Wed Aug  8 02:00:17 2012] Writing fullrun_pn_xmm0411081301_pi300-10000_pass1_cl_src39.gif
[Wed Aug  8 03:43:14 2012] Mean detx,y = (140.43, 7603.46) 
[Wed Aug  8 03:43:19 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug  8 03:53:39 2012] Binned source spectrum to 10 counts/bin
[Wed Aug  8 03:53:39 2012] Setting source spectrum file to fullrun_pn_xmm0411081301_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Wed Aug  8 03:53:39 2012] Setting bgd. spectrum file to fullrun_pn_xmm0411081301_pi300-10000_pass1_cl_src39_bgd.pi.gz
[Thu Aug  9 04:35:25 2012] Updating aperture counts using extracted products
[Thu Aug  9 04:35:25 2012] Error reading totcts from fullrun_pn_xmm0411081301_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Thu Aug  9 04:35:27 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  9 04:35:27 2012] Using photon index=1.80, rate=1.04, arf fullrun_pn_xmm0411081301_pi300-10000_pass1_cl_src39.arf
[Thu Aug  9 04:35:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  9 04:35:27 2012] Updating source flux to 3e-12
[Thu Aug  9 04:41:04 2012] Flag c found in src. 39 procflags, skipping spectral fitting