[Mon Aug  6 17:58:22 2012] Detection parameters:
  Position = (343.2, 261.0) = 11 4 10.88 38 8 10.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 6719.2 +/- 100.5
  Background counts = 112.5
  Rate = 0.6 +/- 0.009

[Mon Aug  6 17:58:22 2012] Off-axis axis estimate = 4.23'
[Mon Aug  6 18:03:43 2012] Using EEF radius (= 8.54 ")to estimate initial spatial extent for simple fitting
[Mon Aug  6 18:03:43 2012] Initial guess for spatial extent in simple fitting = 8.54"
[Mon Aug  6 18:03:43 2012] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.824
[Mon Aug  6 18:03:43 2012] Giving source the simple spatial ID 35 for pass 0, mean size = 8.54"
[Tue Aug  7 03:07:05 2012] fullrun_pn_xmm0411081301_pi300-10000_cl_pass0_src35.ximg exists
[Tue Aug  7 03:07:05 2012] fullrun_pn_xmm0411081301_pi300-10000_cl_pass0_src35_1.ximg exists
[Tue Aug  7 03:07:05 2012] Fit fullrun_pn_xmm0411081301_pi300-10000_cl_pass0_src35 appears to have run properly
[Tue Aug  7 03:07:06 2012] fullrun_pn_xmm0411081301_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Tue Aug  7 03:07:06 2012] fullrun_pn_xmm0411081301_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Tue Aug  7 03:07:06 2012] Fit fullrun_pn_xmm0411081301_pi300-10000_cl_pass0_tfrozen_src35 appears to have run properly
[Tue Aug  7 11:40:07 2012] Spatial fit model total counts = 15204.300000, observed total counts = 15479.000000
[Tue Aug  7 11:40:07 2012] Offset between fit and detection position for source 38 = 6.481423 pixels
[Tue Aug  7 11:40:07 2012] 14188.981200 total counts/ 17.181200 bgd. counts: snr = 3418.993444
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 6.481423 pixels
  Position = (339.0, 265.9) = 11 4 12.43 38 8 32.2
  Extent = 18.2" x 11.2", rotation angle = 51
  Source counts = 14171.8 +/- 119.1
  Background counts = 17.2
  Rate = 1 +/- 0.008
[Tue Aug  7 11:40:07 2012] Vigneting correction estimate = 1.000000
[Tue Aug  7 11:40:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug  7 11:40:07 2012] Assessing source extent using major
[Tue Aug  7 11:40:07 2012] Source does appear to be extended
[Tue Aug  7 11:40:07 2012] Computing asymmetry using major and minor axis, asym = 1.64
[Tue Aug  7 11:40:07 2012] Source is asymmetric
[Tue Aug  7 11:40:07 2012] Source is confused with source 36
[Tue Aug  7 11:40:54 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Aug  7 11:40:54 2012] Initial guess for spatial extent in simple fitting = 14.70"
[Tue Aug  7 11:40:54 2012] source mask rpix=3.4, npix_max = 60, mask sum = 64, frac = 1.063
[Tue Aug  7 11:40:54 2012] Giving source the simple spatial ID 29 for pass 1, mean size = 14.70"
[Tue Aug  7 20:54:58 2012] fullrun_pn_xmm0411081301_pi300-10000_cl_pass1_src29.ximg exists
[Tue Aug  7 20:54:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0411081301_pi300-10000_cl_pass1_src29.csv
[Tue Aug  7 20:54:58 2012] fullrun_pn_xmm0411081301_pi300-10000_cl_pass1_src29_1.ximg exists
[Tue Aug  7 20:54:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0411081301_pi300-10000_cl_pass1_src29.csv
[Tue Aug  7 20:54:58 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0411081301_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0411081301_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug  7 20:54:59 2012] fullrun_pn_xmm0411081301_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Tue Aug  7 20:54:59 2012] fullrun_pn_xmm0411081301_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Tue Aug  7 20:54:59 2012] Fit fullrun_pn_xmm0411081301_pi300-10000_cl_pass1_tfrozen_src29 appears to have run properly
[Wed Aug  8 01:59:36 2012] Warning, spatial fit 29 centroid is now closest to src. 37
[Wed Aug  8 01:59:36 2012] Spatial fit model total counts = 20515.800000, observed total counts = 20721.000000
[Wed Aug  8 01:59:36 2012] Offset between fit and detection position for source 38 = 6.343805 pixels
[Wed Aug  8 01:59:36 2012] Warning, changing simple spatial fit ID from 29 to 30
[Wed Aug  8 01:59:36 2012] 19872.590040 total counts/ 2.390040 bgd. counts: snr = 12852.856352
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 6.343805 pixels
  Position = (343.2, 261.3) = 11 4 10.86 38 8 11.8
  Extent = 23.6 (23.6-23.7)", rotation angle = 0
  Source counts = 19870.2 +/- 141.0
  Background counts = 2.4
  Rate = 1 +/- 0.01
[Wed Aug  8 01:59:36 2012] Vigneting correction estimate = 1.000000
[Wed Aug  8 01:59:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  8 01:59:36 2012] Assessing source extent using major axis lower bound
[Wed Aug  8 01:59:36 2012] Source does appear to be extended
[Wed Aug  8 01:59:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  8 02:00:17 2012] Counts = 19870.200000, rescaling region sizes by 3.000000
[Wed Aug  8 02:00:17 2012] XMMSAS src. selection expression = ellipse(29813.732000, 22680.430000, 4246.992122, 4246.992122, 0.000000, X, Y)
[Wed Aug  8 02:00:17 2012] Writing source region out to fullrun_pn_xmm0411081301_pi300-10000_pass1_cl_src38_src.reg
[Wed Aug  8 02:00:17 2012] Extracting stamp from image fullrun_pn_xmm0411081301_pi300-10000_cl_sm2.00.img.gz, (99, 17) - (587, 505)
[Wed Aug  8 02:00:17 2012] XMMSAS bgd. selection expression = annulus(29813.732000, 22680.430000, 21234.960611, 42469.921222, X, Y) && !ellipse(25922.570382, 27898.467200, 3587.184103, 3587.184103, 0.000000, X, Y) && !ellipse(28064.094513, 37801.178162, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33744.941223, 34304.555023, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25488.129333, 32576.324768, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25728.240400, 31161.756000, 1420.120041, 824.280024, 82.507570, X, Y) && !ellipse(24634.104645, 30689.082153, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25106.415771, 30173.164825, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22032.373400, 30614.205400, 429.108012, 429.108012, 0.000000, X, Y) && !ellipse(26679.956055, 30090.431458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25824.970245, 29589.984985, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31442.507782, 29480.353516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29330.546143, 29402.728424, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24955.934021, 28868.661316, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24483.168884, 28513.006866, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23744.247681, 27863.217651, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23530.488617, 26687.196320, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27507.564000, 25777.482000, 3498.312101, 3498.312101, 0.000000, X, Y) && !ellipse(24244.216248, 25838.720642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27830.158000, 25361.114000, 7507.560216, 7507.560216, 0.000000, X, Y) && !ellipse(24894.247070, 24881.396729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28192.634000, 24841.356000, 3498.312101, 3498.312101, 0.000000, X, Y) && !ellipse(28562.176000, 24323.588000, 3605.784104, 3605.784104, 0.000000, X, Y) && !ellipse(28936.502000, 23835.126000, 3725.616107, 3725.616107, 0.000000, X, Y) && !ellipse(26592.422394, 24060.076691, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30577.692000, 21604.254000, 4703.112135, 4703.112135, 0.000000, X, Y) && !ellipse(31006.712927, 21054.186023, 4952.040142, 1267.299433, 233.145758, X, Y) && !ellipse(31488.266000, 20397.618000, 3986.640115, 3986.640115, 0.000000, X, Y) && !ellipse(32363.774568, 19182.922384, 6797.328196, 1375.656969, 52.687469, X, Y) && !ellipse(32668.247120, 18796.349400, 6797.328196, 1374.984040, 52.533000, X, Y) && !ellipse(33735.118000, 17367.293320, 6931.416199, 1354.812039, 52.480300, X, Y) && !ellipse(34158.190600, 16794.993200, 1867.440054, 443.030413, 52.790800, X, Y)
[Wed Aug  8 02:00:17 2012] Writing fullrun_pn_xmm0411081301_pi300-10000_pass1_cl_src38.gif
[Wed Aug  8 03:35:59 2012] Mean detx,y = (150.42, 5938.19) 
[Wed Aug  8 03:36:05 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug  8 03:42:49 2012] Binned source spectrum to 10 counts/bin
[Wed Aug  8 03:42:49 2012] Setting source spectrum file to fullrun_pn_xmm0411081301_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Wed Aug  8 03:42:49 2012] Setting bgd. spectrum file to fullrun_pn_xmm0411081301_pi300-10000_pass1_cl_src38_bgd.pi.gz
[Thu Aug  9 04:35:25 2012] Updating aperture counts using extracted products
[Thu Aug  9 04:35:25 2012] Error reading totcts from fullrun_pn_xmm0411081301_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Thu Aug  9 04:35:27 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  9 04:35:27 2012] Using photon index=1.80, rate=1.39, arf fullrun_pn_xmm0411081301_pi300-10000_pass1_cl_src38.arf
[Thu Aug  9 04:35:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  9 04:35:27 2012] Updating source flux to 3.7e-12
[Thu Aug  9 04:41:04 2012] Flag c found in src. 38 procflags, skipping spectral fitting