[Mon Aug  6 17:58:22 2012] Detection parameters:
  Position = (332.9, 275.0) = 11 4 14.66 38 9 11.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 6822.7 +/- 102.9
  Background counts = 135.7
  Rate = 0.6 +/- 0.009

[Mon Aug  6 17:58:22 2012] Off-axis axis estimate = 3.03'
[Mon Aug  6 18:03:43 2012] Using EEF radius (= 7.94 ")to estimate initial spatial extent for simple fitting
[Mon Aug  6 18:03:43 2012] Initial guess for spatial extent in simple fitting = 7.94"
[Mon Aug  6 18:03:43 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.740
[Mon Aug  6 18:03:43 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 7.94"
[Tue Aug  7 03:07:05 2012] fullrun_pn_xmm0411081301_pi300-10000_cl_pass0_src33.ximg exists
[Tue Aug  7 03:07:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0411081301_pi300-10000_cl_pass0_src33.csv
[Tue Aug  7 03:07:05 2012] fullrun_pn_xmm0411081301_pi300-10000_cl_pass0_src33_1.ximg exists
[Tue Aug  7 03:07:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0411081301_pi300-10000_cl_pass0_src33.csv
[Tue Aug  7 03:07:05 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0411081301_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0411081301_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug  7 03:07:06 2012] fullrun_pn_xmm0411081301_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Tue Aug  7 03:07:06 2012] fullrun_pn_xmm0411081301_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Tue Aug  7 03:07:06 2012] Fit fullrun_pn_xmm0411081301_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly
[Tue Aug  7 11:40:07 2012] Spatial fit model total counts = 16483.800000, observed total counts = 16501.000000
[Tue Aug  7 11:40:07 2012] Offset between fit and detection position for source 36 = 0.490547 pixels
[Tue Aug  7 11:40:07 2012] Warning, changing simple spatial fit ID from 33 to 30
[Tue Aug  7 11:40:07 2012] 16728.680000 total counts/ 4590.380000 bgd. counts: snr = 179.156903
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 0.490547 pixels
  Position = (333.2, 274.5) = 11 4 14.57 38 9 9.5
  Extent = 15.5 (15.5-31.0)", rotation angle = 0
  Source counts = 12138.3 +/- 129.3
  Background counts = 4590.4
  Rate = 0.8 +/- 0.009
[Tue Aug  7 11:40:07 2012] Vigneting correction estimate = 1.000000
[Tue Aug  7 11:40:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug  7 11:40:07 2012] Assessing source extent using major axis lower bound
[Tue Aug  7 11:40:07 2012] Source does appear to be extended
[Tue Aug  7 11:40:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug  7 11:40:07 2012] Source is confused with source 33
[Tue Aug  7 11:40:07 2012] Source is confused with source 38
[Tue Aug  7 11:40:54 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Aug  7 11:40:54 2012] Initial guess for spatial extent in simple fitting = 15.52"
[Tue Aug  7 11:40:54 2012] source mask rpix=3.6, npix_max = 66, mask sum = 72, frac = 1.087
[Tue Aug  7 11:40:54 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 15.52"
[Tue Aug  7 20:54:58 2012] fullrun_pn_xmm0411081301_pi300-10000_cl_pass1_src27.ximg exists
[Tue Aug  7 20:54:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0411081301_pi300-10000_cl_pass1_src27.csv
[Tue Aug  7 20:54:58 2012] fullrun_pn_xmm0411081301_pi300-10000_cl_pass1_src27_1.ximg exists
[Tue Aug  7 20:54:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0411081301_pi300-10000_cl_pass1_src27.csv
[Tue Aug  7 20:54:58 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0411081301_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0411081301_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug  7 20:54:59 2012] fullrun_pn_xmm0411081301_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Tue Aug  7 20:54:59 2012] fullrun_pn_xmm0411081301_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Tue Aug  7 20:54:59 2012] Fit fullrun_pn_xmm0411081301_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly
[Wed Aug  8 01:59:36 2012] Warning, spatial fit 27 centroid is now closest to src. 37
[Wed Aug  8 01:59:36 2012] Vigneting correction estimate = 1.000000
[Wed Aug  8 01:59:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  8 01:59:36 2012] Assessing source extent using major axis lower bound
[Wed Aug  8 01:59:36 2012] Source does appear to be extended
[Wed Aug  8 01:59:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  8 02:00:17 2012] Counts = 12138.300000, rescaling region sizes by 3.000000
[Wed Aug  8 02:00:17 2012] XMMSAS src. selection expression = ellipse(28936.502000, 23835.126000, 2794.212080, 2794.212080, 0.000000, X, Y)
[Wed Aug  8 02:00:17 2012] Writing source region out to fullrun_pn_xmm0411081301_pi300-10000_pass1_cl_src36_src.reg
[Wed Aug  8 02:00:17 2012] Extracting stamp from image fullrun_pn_xmm0411081301_pi300-10000_cl_sm2.00.img.gz, (173, 114) - (494, 435)
[Wed Aug  8 02:00:17 2012] XMMSAS bgd. selection expression = annulus(28936.502000, 23835.126000, 13971.060402, 27942.120804, X, Y) && !ellipse(25922.570382, 27898.467200, 3587.184103, 3587.184103, 0.000000, X, Y) && !ellipse(28064.094513, 37801.178162, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33744.941223, 34304.555023, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25488.129333, 32576.324768, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25728.240400, 31161.756000, 1420.120041, 824.280024, 82.507570, X, Y) && !ellipse(24634.104645, 30689.082153, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25106.415771, 30173.164825, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22032.373400, 30614.205400, 429.108012, 429.108012, 0.000000, X, Y) && !ellipse(26679.956055, 30090.431458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25824.970245, 29589.984985, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31442.507782, 29480.353516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29330.546143, 29402.728424, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24955.934021, 28868.661316, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24483.168884, 28513.006866, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23744.247681, 27863.217651, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23530.488617, 26687.196320, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27507.564000, 25777.482000, 3498.312101, 3498.312101, 0.000000, X, Y) && !ellipse(24244.216248, 25838.720642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27830.158000, 25361.114000, 7507.560216, 7507.560216, 0.000000, X, Y) && !ellipse(24894.247070, 24881.396729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28192.634000, 24841.356000, 3498.312101, 3498.312101, 0.000000, X, Y) && !ellipse(28562.176000, 24323.588000, 3605.784104, 3605.784104, 0.000000, X, Y) && !ellipse(26592.422394, 24060.076691, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29813.732000, 22680.430000, 5662.656163, 5662.656163, 0.000000, X, Y) && !ellipse(30577.692000, 21604.254000, 4703.112135, 4703.112135, 0.000000, X, Y) && !ellipse(31006.712927, 21054.186023, 4952.040142, 1267.299433, 233.145758, X, Y) && !ellipse(31488.266000, 20397.618000, 3986.640115, 3986.640115, 0.000000, X, Y) && !ellipse(32363.774568, 19182.922384, 6797.328196, 1375.656969, 52.687469, X, Y) && !ellipse(32668.247120, 18796.349400, 6797.328196, 1374.984040, 52.533000, X, Y) && !ellipse(33735.118000, 17367.293320, 6931.416199, 1354.812039, 52.480300, X, Y) && !ellipse(34158.190600, 16794.993200, 1867.440054, 443.030413, 52.790800, X, Y)
[Wed Aug  8 02:00:17 2012] Writing fullrun_pn_xmm0411081301_pi300-10000_pass1_cl_src36.gif
[Wed Aug  8 03:21:46 2012] Mean detx,y = (153.04, 4647.93) 
[Wed Aug  8 03:21:51 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug  8 03:34:31 2012] Binned source spectrum to 10 counts/bin
[Wed Aug  8 03:34:32 2012] Setting source spectrum file to fullrun_pn_xmm0411081301_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Wed Aug  8 03:34:32 2012] Setting bgd. spectrum file to fullrun_pn_xmm0411081301_pi300-10000_pass1_cl_src36_bgd.pi.gz
[Thu Aug  9 04:35:25 2012] Updating aperture counts using extracted products
[Thu Aug  9 04:35:25 2012] Error reading totcts from fullrun_pn_xmm0411081301_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Thu Aug  9 04:35:27 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  9 04:35:27 2012] Using photon index=1.80, rate=0.85, arf fullrun_pn_xmm0411081301_pi300-10000_pass1_cl_src36.arf
[Thu Aug  9 04:35:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  9 04:35:27 2012] Updating source flux to 2.2e-12
[Thu Aug  9 04:41:04 2012] Flag c found in src. 36 procflags, skipping spectral fitting