[Mon Aug  6 17:58:21 2012] Detection parameters:
  Position = (295.9, 365.9) = 11 4 28.32 38 15 49.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 221.6 +/- 27.3
  Background counts = 148.5
  Rate = 0.02 +/- 0.002

[Mon Aug  6 17:58:22 2012] Off-axis axis estimate = 4.89'
[Mon Aug  6 18:03:43 2012] Using EEF radius (= 8.88 ")to estimate initial spatial extent for simple fitting
[Mon Aug  6 18:03:43 2012] Initial guess for spatial extent in simple fitting = 8.88"
[Mon Aug  6 18:03:43 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.968
[Mon Aug  6 18:03:43 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 8.88"
[Tue Aug  7 03:07:04 2012] fullrun_pn_xmm0411081301_pi300-10000_cl_pass0_src10.ximg exists
[Tue Aug  7 03:07:04 2012] fullrun_pn_xmm0411081301_pi300-10000_cl_pass0_src10_1.ximg exists
[Tue Aug  7 03:07:04 2012] Fit fullrun_pn_xmm0411081301_pi300-10000_cl_pass0_src10 appears to have run properly
[Tue Aug  7 03:07:05 2012] fullrun_pn_xmm0411081301_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Tue Aug  7 03:07:05 2012] fullrun_pn_xmm0411081301_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Tue Aug  7 03:07:05 2012] Fit fullrun_pn_xmm0411081301_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Tue Aug  7 11:40:07 2012] Spatial fit model total counts = 1917.930000, observed total counts = 1590.000000
[Tue Aug  7 11:40:07 2012] Poor agreement between spatial fit and data for source 10
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Aug  7 11:40:07 2012] Spatial fit model total counts = 2624.330000, observed total counts = 2522.000000
[Tue Aug  7 11:40:07 2012] Offset between fit and detection position for source 10 = 7.169810 pixels
[Tue Aug  7 11:40:07 2012] 2613.229000 total counts/ 2196.540000 bgd. counts: snr = 8.890834
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 7.169810 pixels
  Position = (296.3, 358.7) = 11 4 28.17 38 15 15.9
  Extent = 17.8 (17.7-35.5)" x 10.3 (7.3-13.5)", rotation angle = 83 (69-106) degrees
  Source counts = 416.7 +/- 51.1
  Background counts = 2196.5
  Rate = 0.03 +/- 0.004
[Tue Aug  7 11:40:07 2012] Vigneting correction estimate = 1.000000
[Tue Aug  7 11:40:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug  7 11:40:07 2012] Assessing source extent using major axis lower bound
[Tue Aug  7 11:40:07 2012] Source does appear to be extended
[Tue Aug  7 11:40:07 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.31
[Tue Aug  7 11:40:54 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Aug  7 11:40:54 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Aug  7 11:40:54 2012] Initial guess for spatial extent in simple fitting = 14.03"
[Tue Aug  7 11:40:54 2012] source mask rpix=3.2, npix_max = 55, mask sum = 49, frac = 0.883
[Tue Aug  7 11:40:54 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 14.03"
[Tue Aug  7 20:54:58 2012] fullrun_pn_xmm0411081301_pi300-10000_cl_pass1_src8.ximg exists
[Tue Aug  7 20:54:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0411081301_pi300-10000_cl_pass1_src8.csv
[Tue Aug  7 20:54:58 2012] fullrun_pn_xmm0411081301_pi300-10000_cl_pass1_src8_1.ximg exists
[Tue Aug  7 20:54:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0411081301_pi300-10000_cl_pass1_src8.csv
[Tue Aug  7 20:54:58 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0411081301_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0411081301_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug  7 20:54:59 2012] fullrun_pn_xmm0411081301_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Tue Aug  7 20:54:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0411081301_pi300-10000_cl_pass1_tfrozen_src8.csv
[Tue Aug  7 20:54:59 2012] fullrun_pn_xmm0411081301_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Tue Aug  7 20:54:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0411081301_pi300-10000_cl_pass1_tfrozen_src8.csv
[Tue Aug  7 20:54:59 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0411081301_pi300-10000_cl_pass1_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0411081301_pi300-10000_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  8 01:59:36 2012] Warning, spatial fit 8 centroid is now closest to src. 6
[Wed Aug  8 01:59:36 2012] Vigneting correction estimate = 1.000000
[Wed Aug  8 01:59:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  8 01:59:36 2012] Assessing source extent using major axis lower bound
[Wed Aug  8 01:59:36 2012] Source does appear to be extended
[Wed Aug  8 01:59:36 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.31
[Wed Aug  8 02:00:15 2012] XMMSAS src. selection expression = ellipse(25728.240400, 31161.756000, 1065.090031, 618.210018, 82.507570, X, Y)
[Wed Aug  8 02:00:15 2012] Writing source region out to fullrun_pn_xmm0411081301_pi300-10000_pass1_cl_src10_src.reg
[Wed Aug  8 02:00:15 2012] Extracting stamp from image fullrun_pn_xmm0411081301_pi300-10000_cl_sm2.00.img.gz, (235, 298) - (357, 420)
[Wed Aug  8 02:00:15 2012] XMMSAS bgd. selection expression = annulus(25728.240400, 31161.756000, 1775.150051, 3550.300102, X, Y) && !ellipse(25922.570382, 27898.467200, 3587.184103, 3587.184103, 0.000000, X, Y) && !ellipse(25488.129333, 32576.324768, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24634.104645, 30689.082153, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25106.415771, 30173.164825, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22032.373400, 30614.205400, 429.108012, 429.108012, 0.000000, X, Y) && !ellipse(26679.956055, 30090.431458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25824.970245, 29589.984985, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29330.546143, 29402.728424, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24955.934021, 28868.661316, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24483.168884, 28513.006866, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23744.247681, 27863.217651, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27507.564000, 25777.482000, 3498.312101, 3498.312101, 0.000000, X, Y) && !ellipse(27830.158000, 25361.114000, 7507.560216, 7507.560216, 0.000000, X, Y) && !ellipse(28192.634000, 24841.356000, 3498.312101, 3498.312101, 0.000000, X, Y) && !ellipse(28562.176000, 24323.588000, 3605.784104, 3605.784104, 0.000000, X, Y) && !ellipse(29813.732000, 22680.430000, 5662.656163, 5662.656163, 0.000000, X, Y)
[Wed Aug  8 02:00:15 2012] Writing fullrun_pn_xmm0411081301_pi300-10000_pass1_cl_src10.gif
[Wed Aug  8 02:18:49 2012] Mean detx,y = (1739.47, -2593.55) 
[Wed Aug  8 02:18:54 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug  8 02:19:32 2012] Binned source spectrum to 10 counts/bin
[Wed Aug  8 02:19:33 2012] Setting source spectrum file to fullrun_pn_xmm0411081301_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Wed Aug  8 02:19:33 2012] Setting bgd. spectrum file to fullrun_pn_xmm0411081301_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Thu Aug  9 04:35:25 2012] Updating aperture counts using extracted products
[Thu Aug  9 04:35:25 2012] Error reading totcts from fullrun_pn_xmm0411081301_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Thu Aug  9 04:35:26 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  9 04:35:26 2012] Using photon index=1.80, rate=0.0292, arf fullrun_pn_xmm0411081301_pi300-10000_pass1_cl_src10.arf
[Thu Aug  9 04:35:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  9 04:35:26 2012] Updating source flux to 8.2e-14
[Thu Aug  9 04:41:04 2012] Flag p found in src. 10 procflags, skipping spectral fitting
[Thu Aug  9 04:44:38 2012] Reading fit data from xmm0411081301/analysis//spectral/fullrun_pn_xmm0411081301_pi300-10000_pass1_cl_src10_pl.csv
[Thu Aug  9 04:44:38 2012] Spectral fit parameter nH value = 2.76406e+20
[Thu Aug  9 04:44:38 2012] Spectral fit parameter PhoIndex value = 2.67387
[Thu Aug  9 04:44:38 2012] Failed to get F(0.3-8.0) from xmm0411081301/analysis//spectral/fullrun_pn_xmm0411081301_pi300-10000_pass1_cl_src10_pl.csv, possibly due to different flux energy range selected
[Thu Aug  9 04:44:38 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  9 04:44:38 2012] Using Nh = 2.8e+20, photon index=2.67, rate=0.0292, arf fullrun_pn_xmm0411081301_pi300-10000_pass1_cl_src10.arf
[Thu Aug  9 04:44:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  9 04:44:38 2012] Updating source flux to 5.6e-14