[Mon Aug  6 17:59:25 2012] Detection parameters:
  Position = (351.0, 307.8) = 11 4 7.97 38 11 38.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 85.9 +/- 16.0
  Background counts = 43.0
  Rate = 0.005 +/- 0.001

[Mon Aug  6 17:59:25 2012] Off-axis axis estimate = 3.87'
[Tue Aug  7 05:12:19 2012] Using EEF radius (= 8.37 ")to estimate initial spatial extent for simple fitting
[Tue Aug  7 05:12:19 2012] Initial guess for spatial extent in simple fitting = 8.37"
[Tue Aug  7 05:12:19 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.852
[Tue Aug  7 05:12:19 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 8.37"
[Tue Aug  7 11:39:50 2012] fullrun_mos2_xmm0411081301_pi300-10000_cl_pass0_src25.ximg exists
[Tue Aug  7 11:39:50 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0411081301_pi300-10000_cl_pass0_src25.csv
[Tue Aug  7 11:39:50 2012] fullrun_mos2_xmm0411081301_pi300-10000_cl_pass0_src25_1.ximg exists
[Tue Aug  7 11:39:51 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0411081301_pi300-10000_cl_pass0_src25.csv
[Tue Aug  7 11:39:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0411081301_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0411081301_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug  7 11:39:51 2012] fullrun_mos2_xmm0411081301_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Tue Aug  7 11:39:51 2012] fullrun_mos2_xmm0411081301_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Tue Aug  7 11:39:51 2012] Fit fullrun_mos2_xmm0411081301_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Tue Aug  7 11:40:35 2012] Spatial fit model total counts = 704.918000, observed total counts = 704.000000
[Tue Aug  7 11:40:35 2012] Offset between fit and detection position for source 39 = 6.519691 pixels
[Tue Aug  7 11:40:35 2012] 690.059000 total counts/ 493.260000 bgd. counts: snr = 8.861045
Spatial fit parameters:
  Offset between fit and detection position for source 39 = 6.519691 pixels
  Position = (344.9, 305.7) = 11 4 10.25 38 11 25.2
  Extent = 16.7 (16.7-33.5)", rotation angle = 0
  Source counts = 196.8 +/- 26.3
  Background counts = 493.3
  Rate = 0.01 +/- 0.001
[Tue Aug  7 11:40:35 2012] Vigneting correction estimate = 1.000000
[Tue Aug  7 11:40:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug  7 11:40:35 2012] Assessing source extent using major axis lower bound
[Tue Aug  7 11:40:35 2012] Source does appear to be extended
[Tue Aug  7 11:40:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug  7 11:40:35 2012] Source is confused with source 38
[Tue Aug  7 23:13:20 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Aug  7 23:13:20 2012] Initial guess for spatial extent in simple fitting = 16.73"
[Tue Aug  7 23:13:20 2012] source mask rpix=3.8, npix_max = 75, mask sum = 72, frac = 0.953
[Tue Aug  7 23:13:20 2012] Giving source the simple spatial ID 23 for pass 1, mean size = 16.73"
[Wed Aug  8 01:59:23 2012] fullrun_mos2_xmm0411081301_pi300-10000_cl_pass1_src23.ximg exists
[Wed Aug  8 01:59:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411081301_pi300-10000_cl_pass1_src23.csv
[Wed Aug  8 01:59:23 2012] fullrun_mos2_xmm0411081301_pi300-10000_cl_pass1_src23_1.ximg exists
[Wed Aug  8 01:59:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411081301_pi300-10000_cl_pass1_src23.csv
[Wed Aug  8 01:59:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0411081301_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0411081301_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  8 01:59:24 2012] fullrun_mos2_xmm0411081301_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Wed Aug  8 01:59:24 2012] fullrun_mos2_xmm0411081301_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Wed Aug  8 01:59:24 2012] Fit fullrun_mos2_xmm0411081301_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly
[Wed Aug  8 01:59:59 2012] Source 39 is offset by 6.377655 and -2.793379 pixels which is larger than
2 X fitted extent = 5.962529 x 5.962529, not incorporating fit results
[Wed Aug  8 01:59:59 2012] Spatial fit model total counts = 1938.690000, observed total counts = 1931.000000
[Wed Aug  8 01:59:59 2012] Offset between fit and detection position for source 39 = 9.954691 pixels
[Wed Aug  8 01:59:59 2012] 1582.611000 total counts/ 712.590000 bgd. counts: snr = 32.591915
Spatial fit parameters:
  Offset between fit and detection position for source 39 = 9.954691 pixels
  Position = (353.8, 301.3) = 11 4 6.96 38 11 5.8
  Extent = 33.5 (31.0-66.9)", rotation angle = 0
  Source counts = 870.0 +/- 39.8
  Background counts = 712.6
  Rate = 0.05 +/- 0.002
[Wed Aug  8 01:59:59 2012] Vigneting correction estimate = 1.000000
[Wed Aug  8 01:59:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  8 01:59:59 2012] Assessing source extent using major axis lower bound
[Wed Aug  8 01:59:59 2012] Source does appear to be extended
[Wed Aug  8 01:59:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  9 00:38:52 2012] XMMSAS src. selection expression = ellipse(30729.820000, 26162.012000, 2007.744058, 2007.744058, 0.000000, X, Y)
[Thu Aug  9 00:38:52 2012] Writing source region out to fullrun_mos2_xmm0411081301_pi300-10000_pass1_cl_src39_src.reg
[Thu Aug  9 00:38:52 2012] Extracting stamp from image fullrun_mos2_xmm0411081301_pi300-10000_cl_sm2.00.img.gz, (238, 186) - (469, 417)
[Thu Aug  9 00:38:52 2012] XMMSAS bgd. selection expression = annulus(30729.820000, 26162.012000, 3346.240096, 6692.480193, X, Y) && !ellipse(25928.824000, 27866.466000, 3331.056096, 3331.056096, 0.000000, X, Y) && !ellipse(26629.570000, 28616.794000, 3676.584106, 3676.584106, 0.000000, X, Y) && !ellipse(26284.566437, 28846.762634, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27460.407800, 27663.924000, 1168.328034, 814.312023, 3.492230, X, Y) && !ellipse(25838.579926, 29487.145081, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24049.791107, 26975.617462, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23616.086761, 27691.524872, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27793.182000, 25248.154000, 1210.216035, 1210.216035, 0.000000, X, Y) && !ellipse(23064.138000, 31777.636000, 1386.800040, 1386.800040, 0.000000, X, Y) && !ellipse(23191.260000, 27653.484000, 1264.888036, 1264.888036, 0.000000, X, Y) && !ellipse(23812.588000, 30804.040000, 995.416029, 995.416029, 0.000000, X, Y) && !ellipse(24154.524000, 30222.830000, 1932.528056, 1932.528056, 0.000000, X, Y) && !ellipse(29506.755600, 22932.259000, 862.584025, 862.584025, 0.000000, X, Y) && !ellipse(25097.558594, 30296.589172, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28357.958466, 25967.542664, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28835.444244, 23901.943146, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28064.052032, 26334.342926, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25852.914000, 24113.982000, 1118.640032, 1118.640032, 0.000000, X, Y) && !ellipse(28701.532000, 25464.542000, 1265.032036, 1265.032036, 0.000000, X, Y) && !ellipse(23952.306000, 25751.306000, 1197.888034, 1197.888034, 0.000000, X, Y) && !ellipse(28843.956000, 29282.716000, 1375.128040, 1375.128040, 0.000000, X, Y)
[Thu Aug  9 00:38:52 2012] Writing fullrun_mos2_xmm0411081301_pi300-10000_pass1_cl_src39.gif
[Thu Aug  9 01:28:16 2012] Mean detx,y = (-2559.01, -3842.19) 
[Thu Aug  9 01:28:18 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug  9 01:29:46 2012] Binned source spectrum to 10 counts/bin
[Thu Aug  9 01:29:46 2012] Setting source spectrum file to fullrun_mos2_xmm0411081301_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Thu Aug  9 01:29:46 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0411081301_pi300-10000_pass1_cl_src39_bgd.pi.gz
[Thu Aug  9 04:35:30 2012] Updating aperture counts using extracted products
[Thu Aug  9 04:35:30 2012] Error reading totcts from fullrun_mos2_xmm0411081301_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Thu Aug  9 04:35:32 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  9 04:35:32 2012] Using photon index=1.80, rate=0.0467, arf fullrun_mos2_xmm0411081301_pi300-10000_pass1_cl_src39.arf
[Thu Aug  9 04:35:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  9 04:35:32 2012] Updating source flux to 4.6e-13
[Thu Aug  9 04:38:15 2012] Flag b found in src. 39 procflags, skipping spectral fitting
[Thu Aug  9 04:38:15 2012] Flag c found in src. 39 procflags, skipping spectral fitting