[Mon Aug  6 17:59:25 2012] Detection parameters:
  Position = (332.8, 332.3) = 11 4 14.68 38 13 19.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 67.1 +/- 15.1
  Background counts = 52.7
  Rate = 0.004 +/- 0.0009

[Mon Aug  6 17:59:25 2012] Off-axis axis estimate = 3.50'
[Tue Aug  7 05:12:19 2012] Using EEF radius (= 8.18 ")to estimate initial spatial extent for simple fitting
[Tue Aug  7 05:12:19 2012] Initial guess for spatial extent in simple fitting = 8.18"
[Tue Aug  7 05:12:19 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.103
[Tue Aug  7 05:12:19 2012] Giving source the simple spatial ID 37 for pass 0, mean size = 8.18"
[Tue Aug  7 11:39:51 2012] fullrun_mos2_xmm0411081301_pi300-10000_cl_pass0_src37.ximg exists
[Tue Aug  7 11:39:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411081301_pi300-10000_cl_pass0_src37.csv
[Tue Aug  7 11:39:51 2012] fullrun_mos2_xmm0411081301_pi300-10000_cl_pass0_src37_1.ximg exists
[Tue Aug  7 11:39:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411081301_pi300-10000_cl_pass0_src37.csv
[Tue Aug  7 11:39:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0411081301_pi300-10000_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0411081301_pi300-10000_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug  7 11:39:52 2012] fullrun_mos2_xmm0411081301_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Tue Aug  7 11:39:52 2012] fullrun_mos2_xmm0411081301_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Tue Aug  7 11:39:52 2012] Fit fullrun_mos2_xmm0411081301_pi300-10000_cl_pass0_tfrozen_src37 appears to have run properly
[Tue Aug  7 11:40:35 2012] Warning, spatial fit 37 centroid is now closest to src. 34
[Tue Aug  7 11:40:35 2012] Spatial fit model total counts = 657.658000, observed total counts = 671.000000
[Tue Aug  7 11:40:35 2012] Offset between fit and detection position for source 33 = 4.906851 pixels
[Tue Aug  7 11:40:35 2012] Warning, changing simple spatial fit ID from 37 to 42
[Tue Aug  7 11:40:35 2012] 655.251000 total counts/ 517.204000 bgd. counts: snr = 6.070103
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 4.906851 pixels
  Position = (332.1, 337.1) = 11 4 14.95 38 13 41.9
  Extent = 17.2 (17.1-34.4)", rotation angle = 0
  Source counts = 138.0 +/- 25.6
  Background counts = 517.2
  Rate = 0.007 +/- 0.001
[Tue Aug  7 11:40:35 2012] Vigneting correction estimate = 1.000000
[Tue Aug  7 11:40:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug  7 11:40:35 2012] Assessing source extent using major axis lower bound
[Tue Aug  7 11:40:35 2012] Source does appear to be extended
[Tue Aug  7 11:40:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug  7 23:13:20 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Aug  7 23:13:20 2012] Initial guess for spatial extent in simple fitting = 17.19"
[Tue Aug  7 23:13:20 2012] source mask rpix=4.0, npix_max = 79, mask sum = 81, frac = 1.022
[Tue Aug  7 23:13:20 2012] Giving source the simple spatial ID 30 for pass 1, mean size = 17.19"
[Wed Aug  8 01:59:23 2012] fullrun_mos2_xmm0411081301_pi300-10000_cl_pass1_src30.ximg exists
[Wed Aug  8 01:59:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411081301_pi300-10000_cl_pass1_src30.csv
[Wed Aug  8 01:59:23 2012] fullrun_mos2_xmm0411081301_pi300-10000_cl_pass1_src30_1.ximg exists
[Wed Aug  8 01:59:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411081301_pi300-10000_cl_pass1_src30.csv
[Wed Aug  8 01:59:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0411081301_pi300-10000_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0411081301_pi300-10000_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  8 01:59:24 2012] fullrun_mos2_xmm0411081301_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Wed Aug  8 01:59:24 2012] fullrun_mos2_xmm0411081301_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Wed Aug  8 01:59:24 2012] Fit fullrun_mos2_xmm0411081301_pi300-10000_cl_pass1_tfrozen_src30 appears to have run properly
[Wed Aug  8 01:59:59 2012] Warning, spatial fit 30 centroid is now closest to src. 4
[Wed Aug  8 01:59:59 2012] Vigneting correction estimate = 1.000000
[Wed Aug  8 01:59:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  8 01:59:59 2012] Assessing source extent using major axis lower bound
[Wed Aug  8 01:59:59 2012] Source does appear to be extended
[Wed Aug  8 01:59:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  9 00:38:52 2012] XMMSAS src. selection expression = ellipse(28843.956000, 29282.716000, 1031.346030, 1031.346030, 0.000000, X, Y)
[Thu Aug  9 00:38:52 2012] Writing source region out to fullrun_mos2_xmm0411081301_pi300-10000_pass1_cl_src33_src.reg
[Thu Aug  9 00:38:52 2012] Extracting stamp from image fullrun_mos2_xmm0411081301_pi300-10000_cl_sm2.00.img.gz, (273, 278) - (391, 396)
[Thu Aug  9 00:38:52 2012] XMMSAS bgd. selection expression = annulus(28843.956000, 29282.716000, 1718.910049, 3437.820099, X, Y) && !ellipse(25928.824000, 27866.466000, 3331.056096, 3331.056096, 0.000000, X, Y) && !ellipse(26629.570000, 28616.794000, 3676.584106, 3676.584106, 0.000000, X, Y) && !ellipse(26284.566437, 28846.762634, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27460.407800, 27663.924000, 1168.328034, 814.312023, 3.492230, X, Y) && !ellipse(25838.579926, 29487.145081, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27793.182000, 25248.154000, 1210.216035, 1210.216035, 0.000000, X, Y) && !ellipse(24154.524000, 30222.830000, 1932.528056, 1932.528056, 0.000000, X, Y) && !ellipse(25097.558594, 30296.589172, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28357.958466, 25967.542664, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28064.052032, 26334.342926, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28701.532000, 25464.542000, 1265.032036, 1265.032036, 0.000000, X, Y) && !ellipse(30729.820000, 26162.012000, 2676.992077, 2676.992077, 0.000000, X, Y)
[Thu Aug  9 00:38:52 2012] Writing fullrun_mos2_xmm0411081301_pi300-10000_pass1_cl_src33.gif
[Thu Aug  9 01:30:14 2012] Mean detx,y = (-2918.75, -640.22) 
[Thu Aug  9 01:30:15 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug  9 01:30:27 2012] Binned source spectrum to 10 counts/bin
[Thu Aug  9 01:30:27 2012] Setting source spectrum file to fullrun_mos2_xmm0411081301_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Thu Aug  9 01:30:27 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0411081301_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Thu Aug  9 04:35:30 2012] Updating aperture counts using extracted products
[Thu Aug  9 04:35:31 2012] Error reading totcts from fullrun_mos2_xmm0411081301_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Thu Aug  9 04:35:32 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  9 04:35:32 2012] Using photon index=1.80, rate=0.00741, arf fullrun_mos2_xmm0411081301_pi300-10000_pass1_cl_src33.arf
[Thu Aug  9 04:35:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  9 04:35:32 2012] Updating source flux to 7e-14