[Mon Aug  6 17:59:24 2012] Detection parameters:
  Position = (301.0, 321.0) = 11 4 26.45 38 12 31.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 112166.1 +/- 394.4
  Background counts = 59.3
  Rate = 6 +/- 0.02

[Mon Aug  6 17:59:25 2012] Off-axis axis estimate = 1.64'
[Tue Aug  7 05:12:19 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Tue Aug  7 05:12:19 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Tue Aug  7 05:12:19 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.852
[Tue Aug  7 05:12:19 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.25"
[Tue Aug  7 11:39:50 2012] fullrun_mos2_xmm0411081301_pi300-10000_cl_pass0_src1.ximg exists
[Tue Aug  7 11:39:50 2012] fullrun_mos2_xmm0411081301_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Aug  7 11:39:50 2012] Fit fullrun_mos2_xmm0411081301_pi300-10000_cl_pass0_src1 appears to have run properly
[Tue Aug  7 11:39:51 2012] fullrun_mos2_xmm0411081301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Aug  7 11:39:51 2012] fullrun_mos2_xmm0411081301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Aug  7 11:39:51 2012] Fit fullrun_mos2_xmm0411081301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Aug  7 11:40:35 2012] Spatial fit model total counts = 230354.000000, observed total counts = 240019.000000
[Tue Aug  7 11:40:35 2012] Offset between fit and detection position for source 1 = 2.172428 pixels
[Tue Aug  7 11:40:35 2012] 214546.000000 total counts/ 17263.000000 bgd. counts: snr = 1501.521407
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 2.172428 pixels
  Position = (298.8, 321.4) = 11 4 27.24 38 12 33.3
  Extent = 13.2 (13.2-13.2)", rotation angle = 0
  Source counts = 197283.0 +/- 463.2
  Background counts = 17263.0
  Rate = 1e+01 +/- 0.02
[Tue Aug  7 11:40:35 2012] Vigneting correction estimate = 1.000000
[Tue Aug  7 11:40:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug  7 11:40:35 2012] Assessing source extent using major axis lower bound
[Tue Aug  7 11:40:35 2012] Source does appear to be extended
[Tue Aug  7 11:40:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug  7 23:13:20 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Aug  7 23:13:20 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Aug  7 23:13:20 2012] Initial guess for spatial extent in simple fitting = 13.22"
[Tue Aug  7 23:13:20 2012] source mask rpix=3.0, npix_max = 50, mask sum = 49, frac = 0.978
[Tue Aug  7 23:13:20 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 13.22"
[Wed Aug  8 01:59:23 2012] fullrun_mos2_xmm0411081301_pi300-10000_cl_pass1_src1.ximg exists
[Wed Aug  8 01:59:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411081301_pi300-10000_cl_pass1_src1.csv
[Wed Aug  8 01:59:23 2012] fullrun_mos2_xmm0411081301_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Aug  8 01:59:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411081301_pi300-10000_cl_pass1_src1.csv
[Wed Aug  8 01:59:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0411081301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0411081301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  8 01:59:23 2012] fullrun_mos2_xmm0411081301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Aug  8 01:59:23 2012] fullrun_mos2_xmm0411081301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Aug  8 01:59:23 2012] Fit fullrun_mos2_xmm0411081301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Aug  8 01:59:59 2012] Spatial fit model total counts = 302678.000000, observed total counts = 290880.000000
[Wed Aug  8 01:59:59 2012] Offset between fit and detection position for source 1 = 0.368613 pixels
[Wed Aug  8 01:59:59 2012] 299420.000000 total counts/ 57600.000000 bgd. counts: snr = 1007.583333
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.368613 pixels
  Position = (298.5, 321.2) = 11 4 27.35 38 12 32.5
  Extent = 15.5 (15.5-15.6)", rotation angle = 0
  Source counts = 241820.0 +/- 547.2
  Background counts = 57600.0
  Rate = 1e+01 +/- 0.03
[Wed Aug  8 01:59:59 2012] Spatial fit model total counts = 168062.000000, observed total counts = 181055.000000
[Wed Aug  8 01:59:59 2012] Offset between fit and detection position for source 1 = 0.310348 pixels
[Wed Aug  8 01:59:59 2012] Warning, changing simple spatial fit ID from 1 to 2
[Wed Aug  8 01:59:59 2012] 137797.700000 total counts/ 38785.500000 bgd. counts: snr = 502.752239
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.310348 pixels
  Position = (298.6, 320.9) = 11 4 27.32 38 12 31.1
  Extent = 13.9 (13.7-14.0)", rotation angle = 0
  Source counts = 99012.2 +/- 371.2
  Background counts = 38785.5
  Rate = 5 +/- 0.02
[Wed Aug  8 01:59:59 2012] Vigneting correction estimate = 1.000000
[Wed Aug  8 01:59:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  8 01:59:59 2012] Assessing source extent using major axis lower bound
[Wed Aug  8 01:59:59 2012] Source does appear to be extended
[Wed Aug  8 01:59:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  9 00:38:51 2012] Counts = 99012.200000, rescaling region sizes by 3.000000
[Thu Aug  9 00:38:51 2012] XMMSAS src. selection expression = ellipse(25928.824000, 27866.466000, 2498.292072, 2498.292072, 0.000000, X, Y)
[Thu Aug  9 00:38:51 2012] Writing source region out to fullrun_mos2_xmm0411081301_pi300-10000_pass1_cl_src1_src.reg
[Thu Aug  9 00:38:51 2012] Extracting stamp from image fullrun_mos2_xmm0411081301_pi300-10000_cl_sm2.00.img.gz, (155, 177) - (442, 464)
[Thu Aug  9 00:38:51 2012] XMMSAS bgd. selection expression = annulus(25928.824000, 27866.466000, 12491.460359, 24982.920719, X, Y) && !ellipse(26629.570000, 28616.794000, 3676.584106, 3676.584106, 0.000000, X, Y) && !ellipse(26284.566437, 28846.762634, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27460.407800, 27663.924000, 1168.328034, 814.312023, 3.492230, X, Y) && !ellipse(25838.579926, 29487.145081, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24049.791107, 26975.617462, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22048.076904, 30607.673645, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23616.086761, 27691.524872, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27793.182000, 25248.154000, 1210.216035, 1210.216035, 0.000000, X, Y) && !ellipse(22236.052979, 32889.464233, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23064.138000, 31777.636000, 1386.800040, 1386.800040, 0.000000, X, Y) && !ellipse(23191.260000, 27653.484000, 1264.888036, 1264.888036, 0.000000, X, Y) && !ellipse(22672.218000, 32268.170000, 1303.800038, 1303.800038, 0.000000, X, Y) && !ellipse(23812.588000, 30804.040000, 995.416029, 995.416029, 0.000000, X, Y) && !ellipse(24154.524000, 30222.830000, 1932.528056, 1932.528056, 0.000000, X, Y) && !ellipse(29506.755600, 22932.259000, 862.584025, 862.584025, 0.000000, X, Y) && !ellipse(25097.558594, 30296.589172, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28357.958466, 25967.542664, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28835.444244, 23901.943146, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28064.052032, 26334.342926, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25852.914000, 24113.982000, 1118.640032, 1118.640032, 0.000000, X, Y) && !ellipse(28701.532000, 25464.542000, 1265.032036, 1265.032036, 0.000000, X, Y) && !ellipse(30729.820000, 26162.012000, 2676.992077, 2676.992077, 0.000000, X, Y) && !ellipse(23952.306000, 25751.306000, 1197.888034, 1197.888034, 0.000000, X, Y) && !ellipse(28843.956000, 29282.716000, 1375.128040, 1375.128040, 0.000000, X, Y) && !ellipse(19571.690600, 36672.776000, 3564.016103, 950.168027, 52.751683, X, Y) && !ellipse(17365.934400, 39637.644000, 4380.960126, 645.867219, 54.267500, X, Y)
[Thu Aug  9 00:38:51 2012] Writing fullrun_mos2_xmm0411081301_pi300-10000_pass1_cl_src1.gif
[Thu Aug  9 00:39:14 2012] Mean detx,y = (39.25, -87.42) 
[Thu Aug  9 00:39:19 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug  9 00:50:53 2012] Binned source spectrum to 10 counts/bin
[Thu Aug  9 00:50:53 2012] Setting source spectrum file to fullrun_mos2_xmm0411081301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Aug  9 00:50:53 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0411081301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Aug  9 04:35:29 2012] Updating aperture counts using extracted products
[Thu Aug  9 04:35:29 2012] Error reading totcts from fullrun_mos2_xmm0411081301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Aug  9 04:35:31 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  9 04:35:31 2012] Using photon index=1.80, rate=5.32, arf fullrun_mos2_xmm0411081301_pi300-10000_pass1_cl_src1.arf
[Thu Aug  9 04:35:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  9 04:35:31 2012] Updating source flux to 4.7e-11
[Thu Aug  9 04:41:04 2012] Reading fit data from xmm0411081301/analysis//spectral/fullrun_mos2_xmm0411081301_pi300-10000_pass1_cl_src1_pl.csv
[Thu Aug  9 04:41:04 2012] Spectral fit parameter nH value = 2.93626e+20
[Thu Aug  9 04:41:04 2012] Spectral fit parameter PhoIndex value = 2.59396
[Thu Aug  9 04:41:04 2012] Failed to get F(0.3-8.0) from xmm0411081301/analysis//spectral/fullrun_mos2_xmm0411081301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Aug  9 04:41:04 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  9 04:41:04 2012] Using Nh = 2.9e+20, photon index=2.59, rate=5.32, arf fullrun_mos2_xmm0411081301_pi300-10000_pass1_cl_src1.arf
[Thu Aug  9 04:41:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  9 04:41:04 2012] Updating source flux to 3.7e-11