[Mon Aug  6 17:58:51 2012] Detection parameters:
  Position = (282.2, 337.2) = 11 4 33.39 38 13 40.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 546.2 +/- 33.7
  Background counts = 43.9
  Rate = 0.03 +/- 0.002

[Mon Aug  6 17:58:52 2012] Off-axis axis estimate = 3.04'
[Tue Aug  7 03:07:06 2012] Using EEF radius (= 7.95 ")to estimate initial spatial extent for simple fitting
[Tue Aug  7 03:07:06 2012] Initial guess for spatial extent in simple fitting = 7.95"
[Tue Aug  7 03:07:06 2012] source mask rpix=1.8, npix_max = 21, mask sum = 15, frac = 0.692
[Tue Aug  7 03:07:06 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 7.95"
[Tue Aug  7 05:12:17 2012] fullrun_mos1_xmm0411081301_pi300-10000_cl_pass0_src6.ximg exists
[Tue Aug  7 05:12:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0411081301_pi300-10000_cl_pass0_src6.csv
[Tue Aug  7 05:12:17 2012] fullrun_mos1_xmm0411081301_pi300-10000_cl_pass0_src6_1.ximg exists
[Tue Aug  7 05:12:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0411081301_pi300-10000_cl_pass0_src6.csv
[Tue Aug  7 05:12:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0411081301_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0411081301_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug  7 05:12:18 2012] fullrun_mos1_xmm0411081301_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Tue Aug  7 05:12:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0411081301_pi300-10000_cl_pass0_tfrozen_src6.csv
[Tue Aug  7 05:12:18 2012] fullrun_mos1_xmm0411081301_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Tue Aug  7 05:12:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0411081301_pi300-10000_cl_pass0_tfrozen_src6.csv
[Tue Aug  7 05:12:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0411081301_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0411081301_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug  7 11:40:19 2012] Spatial fit model total counts = 2846.240000, observed total counts = 4191.000000
[Tue Aug  7 11:40:19 2012] Poor agreement between spatial fit and data for source 5
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Aug  7 11:40:19 2012] Vigneting correction estimate = 1.000000
[Tue Aug  7 11:40:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug  7 11:40:19 2012] Assessing source extent using major
[Tue Aug  7 11:40:19 2012] Source does appear to be extended
[Tue Aug  7 11:40:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug  7 20:54:59 2012] Using EEF radius (= 7.95 ")to estimate initial spatial extent for simple fitting
[Tue Aug  7 20:54:59 2012] Initial guess for spatial extent in simple fitting = 7.95"
[Tue Aug  7 20:54:59 2012] source mask rpix=1.8, npix_max = 21, mask sum = 15, frac = 0.692
[Tue Aug  7 20:54:59 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 7.95"
[Tue Aug  7 23:13:19 2012] fullrun_mos1_xmm0411081301_pi300-10000_cl_pass1_src6.ximg exists
[Tue Aug  7 23:13:19 2012] fullrun_mos1_xmm0411081301_pi300-10000_cl_pass1_src6_1.ximg exists
[Tue Aug  7 23:13:19 2012] Fit fullrun_mos1_xmm0411081301_pi300-10000_cl_pass1_src6 appears to have run properly
[Tue Aug  7 23:13:20 2012] fullrun_mos1_xmm0411081301_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Tue Aug  7 23:13:20 2012] fullrun_mos1_xmm0411081301_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Tue Aug  7 23:13:20 2012] Fit fullrun_mos1_xmm0411081301_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Wed Aug  8 01:59:48 2012] Warning, spatial fit 6 centroid is now closest to src. 6
[Wed Aug  8 01:59:48 2012] Source 5 is offset by 1.432794 and -0.243551 pixels which is larger than
2 X fitted extent = 0.932883 x 0.932883, not incorporating fit results
[Wed Aug  8 01:59:48 2012] Vigneting correction estimate = 1.000000
[Wed Aug  8 01:59:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  8 01:59:48 2012] Assessing source extent using major
[Wed Aug  8 01:59:48 2012] Source does appear to be extended
[Wed Aug  8 01:59:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  8 20:07:26 2012] XMMSAS src. selection expression = ellipse(24499.853088, 29283.945068, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Aug  8 20:07:26 2012] Writing source region out to fullrun_mos1_xmm0411081301_pi300-10000_pass1_cl_src5_src.reg
[Wed Aug  8 20:07:26 2012] Extracting stamp from image fullrun_mos1_xmm0411081301_pi300-10000_cl_sm2.00.img.gz, (245, 300) - (320, 375)
[Wed Aug  8 20:07:26 2012] XMMSAS bgd. selection expression = annulus(24499.853088, 29283.945068, 1087.500000, 2175.000000, X, Y) && !ellipse(25921.768000, 27895.221060, 3480.096100, 3480.096100, 0.000000, X, Y) && !ellipse(25932.836000, 27910.565000, 3480.096100, 3480.096100, 69.875000, X, Y) && !ellipse(22046.206800, 30607.331200, 403.716812, 403.716812, 0.000000, X, Y) && !ellipse(25846.197205, 30179.781158, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21890.396000, 24962.276000, 2413.904069, 2413.904069, 0.000000, X, Y) && !ellipse(23651.064117, 26243.418793, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27370.312000, 25515.688000, 2495.376072, 2495.376072, 3.162000, X, Y) && !ellipse(23957.680000, 26500.326000, 2495.376072, 2495.376072, 0.000000, X, Y) && !ellipse(23384.969926, 31163.910000, 1020.245753, 642.818043, 339.905047, X, Y) && !ellipse(22826.122000, 32032.330000, 1518.584044, 1518.584044, 0.000000, X, Y) && !ellipse(27821.454000, 32055.824800, 1438.800041, 1438.800041, 0.000000, X, Y)
[Wed Aug  8 20:07:26 2012] Writing fullrun_mos1_xmm0411081301_pi300-10000_pass1_cl_src5.gif
[Wed Aug  8 20:31:38 2012] Mean detx,y = (1989.76, -432.67) 
[Wed Aug  8 20:31:39 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug  8 20:31:51 2012] Binned source spectrum to 10 counts/bin
[Wed Aug  8 20:31:51 2012] Setting source spectrum file to fullrun_mos1_xmm0411081301_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed Aug  8 20:31:51 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0411081301_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Wed Aug  8 22:48:42 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Aug  8 22:48:42 2012] rmf not generated due to insufficient counts
[Thu Aug  9 04:35:27 2012] Updating aperture counts using extracted products
[Thu Aug  9 04:35:27 2012] Error reading totcts from fullrun_mos1_xmm0411081301_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Thu Aug  9 04:35:29 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  9 04:35:29 2012] Using photon index=1.80, rate=0.0321, arf fullrun_mos1_xmm0411081301_pi300-10000_pass1_cl_src5.arf
[Thu Aug  9 04:35:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  9 04:35:29 2012] Updating source flux to 3.4e-13
[Thu Aug  9 04:35:33 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting