[Mon Aug  6 17:58:51 2012] Detection parameters:
  Position = (297.6, 347.5) = 11 4 27.67 38 14 22.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 590.9 +/- 34.4
  Background counts = 47.5
  Rate = 0.04 +/- 0.002

[Mon Aug  6 17:58:52 2012] Off-axis axis estimate = 3.55'
[Tue Aug  7 03:07:06 2012] Using EEF radius (= 8.21 ")to estimate initial spatial extent for simple fitting
[Tue Aug  7 03:07:06 2012] Initial guess for spatial extent in simple fitting = 8.21"
[Tue Aug  7 03:07:06 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.878
[Tue Aug  7 03:07:06 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 8.21"
[Tue Aug  7 05:12:17 2012] fullrun_mos1_xmm0411081301_pi300-10000_cl_pass0_src5.ximg exists
[Tue Aug  7 05:12:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0411081301_pi300-10000_cl_pass0_src5.csv
[Tue Aug  7 05:12:17 2012] fullrun_mos1_xmm0411081301_pi300-10000_cl_pass0_src5_1.ximg exists
[Tue Aug  7 05:12:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0411081301_pi300-10000_cl_pass0_src5.csv
[Tue Aug  7 05:12:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0411081301_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0411081301_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug  7 05:12:18 2012] fullrun_mos1_xmm0411081301_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Tue Aug  7 05:12:18 2012] fullrun_mos1_xmm0411081301_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Tue Aug  7 05:12:18 2012] Fit fullrun_mos1_xmm0411081301_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Tue Aug  7 11:40:19 2012] Source 3 is offset by -0.070726 and 6.627921 pixels which is larger than
2 X fitted extent = 1.815425 x 1.815425, not incorporating fit results
[Tue Aug  7 11:40:19 2012] Vigneting correction estimate = 1.000000
[Tue Aug  7 11:40:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug  7 11:40:19 2012] Assessing source extent using major
[Tue Aug  7 11:40:19 2012] Source does appear to be extended
[Tue Aug  7 11:40:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug  7 20:54:59 2012] Using EEF radius (= 8.21 ")to estimate initial spatial extent for simple fitting
[Tue Aug  7 20:54:59 2012] Initial guess for spatial extent in simple fitting = 8.21"
[Tue Aug  7 20:54:59 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.878
[Tue Aug  7 20:54:59 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 8.21"
[Tue Aug  7 23:13:19 2012] fullrun_mos1_xmm0411081301_pi300-10000_cl_pass1_src5.ximg exists
[Tue Aug  7 23:13:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0411081301_pi300-10000_cl_pass1_src5.csv
[Tue Aug  7 23:13:19 2012] fullrun_mos1_xmm0411081301_pi300-10000_cl_pass1_src5_1.ximg exists
[Tue Aug  7 23:13:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0411081301_pi300-10000_cl_pass1_src5.csv
[Tue Aug  7 23:13:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0411081301_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0411081301_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug  7 23:13:20 2012] fullrun_mos1_xmm0411081301_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Tue Aug  7 23:13:20 2012] fullrun_mos1_xmm0411081301_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Tue Aug  7 23:13:20 2012] Fit fullrun_mos1_xmm0411081301_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Wed Aug  8 01:59:48 2012] Warning, spatial fit 5 centroid is now closest to src. 4
[Wed Aug  8 01:59:48 2012] Warning: source 31 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 17.005253 pixels away
[Wed Aug  8 01:59:48 2012] Vigneting correction estimate = 1.000000
[Wed Aug  8 01:59:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  8 01:59:48 2012] Assessing source extent using major
[Wed Aug  8 01:59:48 2012] Source does appear to be extended
[Wed Aug  8 01:59:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  8 20:07:26 2012] XMMSAS src. selection expression = ellipse(25846.197205, 30179.781158, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Aug  8 20:07:26 2012] Writing source region out to fullrun_mos1_xmm0411081301_pi300-10000_pass1_cl_src3_src.reg
[Wed Aug  8 20:07:26 2012] Extracting stamp from image fullrun_mos1_xmm0411081301_pi300-10000_cl_sm2.00.img.gz, (260, 310) - (335, 385)
[Wed Aug  8 20:07:26 2012] XMMSAS bgd. selection expression = annulus(25846.197205, 30179.781158, 1087.500000, 2175.000000, X, Y) && !ellipse(25921.768000, 27895.221060, 3480.096100, 3480.096100, 0.000000, X, Y) && !ellipse(25932.836000, 27910.565000, 3480.096100, 3480.096100, 69.875000, X, Y) && !ellipse(24499.853088, 29283.945068, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28563.911743, 29789.675049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29386.959509, 30437.375552, 1441.664041, 376.506978, 322.622396, X, Y) && !ellipse(27370.312000, 25515.688000, 2495.376072, 2495.376072, 3.162000, X, Y) && !ellipse(28638.690643, 29276.019806, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23957.680000, 26500.326000, 2495.376072, 2495.376072, 0.000000, X, Y) && !ellipse(23384.969926, 31163.910000, 1020.245753, 642.818043, 339.905047, X, Y) && !ellipse(22826.122000, 32032.330000, 1518.584044, 1518.584044, 0.000000, X, Y) && !ellipse(27821.454000, 32055.824800, 1438.800041, 1438.800041, 0.000000, X, Y)
[Wed Aug  8 20:07:26 2012] Writing fullrun_mos1_xmm0411081301_pi300-10000_pass1_cl_src3.gif
[Wed Aug  8 20:31:20 2012] Mean detx,y = (1944.30, 1004.17) 
[Wed Aug  8 20:31:21 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug  8 20:31:32 2012] Binned source spectrum to 10 counts/bin
[Wed Aug  8 20:31:32 2012] Setting source spectrum file to fullrun_mos1_xmm0411081301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Aug  8 20:31:32 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0411081301_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Wed Aug  8 22:48:32 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Aug  8 22:48:32 2012] rmf not generated due to insufficient counts
[Thu Aug  9 04:35:27 2012] Updating aperture counts using extracted products
[Thu Aug  9 04:35:27 2012] Error reading totcts from fullrun_mos1_xmm0411081301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Aug  9 04:35:28 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  9 04:35:28 2012] Using photon index=1.80, rate=0.0361, arf fullrun_mos1_xmm0411081301_pi300-10000_pass1_cl_src3.arf
[Thu Aug  9 04:35:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  9 04:35:29 2012] Updating source flux to 3.8e-13
[Thu Aug  9 04:35:33 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting