[Sun May  6 10:18:36 2012] Detection parameters:
  Position = (154.4, 253.2) = 11 5 17.95 38 10 48.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 37.8 +/- 8.5
  Background counts = 7.5
  Rate = 0.004 +/- 0.0009

[Sun May  6 10:18:37 2012] Off-axis axis estimate = 10.94'
[Sun May  6 12:22:07 2012] Using EEF radius (= 11.90 ")to estimate initial spatial extent for simple fitting
[Sun May  6 12:22:07 2012] Initial guess for spatial extent in simple fitting = 11.90"
[Sun May  6 12:22:07 2012] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.003
[Sun May  6 12:22:07 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 11.90"
[Sun May  6 14:24:08 2012] fullrun_mos2_xmm0411080701_pi300-10000_cl_pass0_src11.ximg exists
[Sun May  6 14:24:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411080701_pi300-10000_cl_pass0_src11.csv
[Sun May  6 14:24:08 2012] fullrun_mos2_xmm0411080701_pi300-10000_cl_pass0_src11_1.ximg exists
[Sun May  6 14:24:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411080701_pi300-10000_cl_pass0_src11.csv
[Sun May  6 14:24:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0411080701_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0411080701_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 14:24:08 2012] fullrun_mos2_xmm0411080701_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sun May  6 14:24:08 2012] fullrun_mos2_xmm0411080701_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sun May  6 14:24:08 2012] Fit fullrun_mos2_xmm0411080701_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Sun May  6 14:24:25 2012] Spatial fit model total counts = 102.000000, observed total counts = 102.000000
[Sun May  6 14:24:25 2012] Offset between fit and detection position for source 9 = 0.288796 pixels
[Sun May  6 14:24:25 2012] 101.388400 total counts/ 77.386500 bgd. counts: snr = 2.728431
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.288796 pixels
  Position = (154.5, 253.5) = 11 5 17.90 38 10 49.2
  Extent = 4.5 (3.4-6.6)", rotation angle = 0
  Source counts = 24.0 +/- 10.1
  Background counts = 77.4
  Rate = 0.001 +/- 0.0005
[Sun May  6 14:24:25 2012] Vigneting correction estimate = 1.000000
[Sun May  6 14:24:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  6 14:24:25 2012] Assessing source extent using major axis lower bound
[Sun May  6 14:24:25 2012] Source does appear to be extended
[Sun May  6 14:24:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  6 17:11:22 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May  6 17:11:22 2012] Initial guess for spatial extent in simple fitting = 4.50"
[Sun May  6 17:11:22 2012] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.954
[Sun May  6 17:11:22 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 4.50"
[Sun May  6 19:02:51 2012] fullrun_mos2_xmm0411080701_pi300-10000_cl_pass1_src10.ximg exists
[Sun May  6 19:02:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411080701_pi300-10000_cl_pass1_src10.csv
[Sun May  6 19:02:51 2012] fullrun_mos2_xmm0411080701_pi300-10000_cl_pass1_src10_1.ximg exists
[Sun May  6 19:02:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411080701_pi300-10000_cl_pass1_src10.csv
[Sun May  6 19:02:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0411080701_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0411080701_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 19:02:51 2012] fullrun_mos2_xmm0411080701_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Sun May  6 19:02:51 2012] fullrun_mos2_xmm0411080701_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Sun May  6 19:02:51 2012] Fit fullrun_mos2_xmm0411080701_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Sun May  6 19:03:08 2012] Spatial fit model total counts = 102.000000, observed total counts = 102.000000
[Sun May  6 19:03:08 2012] Offset between fit and detection position for source 9 = 0.000367 pixels
[Sun May  6 19:03:08 2012] 101.388000 total counts/ 77.393900 bgd. counts: snr = 2.727414
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.000367 pixels
  Position = (154.5, 253.5) = 11 5 17.90 38 10 49.2
  Extent = 4.5 (3.4-6.6)", rotation angle = 0
  Source counts = 24.0 +/- 10.1
  Background counts = 77.4
  Rate = 0.001 +/- 0.0005
[Sun May  6 19:03:08 2012] Vigneting correction estimate = 1.000000
[Sun May  6 19:03:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  6 19:03:08 2012] Assessing source extent using major axis lower bound
[Sun May  6 19:03:08 2012] Source does appear to be extended
[Sun May  6 19:03:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  6 19:49:20 2012] XMMSAS src. selection expression = ellipse(13394.924000, 22006.108200, 270.058808, 270.058808, 0.000000, X, Y)
[Sun May  6 19:49:20 2012] Writing source region out to fullrun_mos2_xmm0411080701_pi300-10000_pass1_cl_src9_src.reg
[Sun May  6 19:49:20 2012] Extracting stamp from image fullrun_mos2_xmm0411080701_pi300-10000_cl_sm2.00.img.gz, (139, 238) - (170, 269)
[Sun May  6 19:49:20 2012] XMMSAS bgd. selection expression = annulus(13394.924000, 22006.108200, 450.098013, 900.196026, X, Y)
[Sun May  6 19:49:20 2012] Writing fullrun_mos2_xmm0411080701_pi300-10000_pass1_cl_src9.gif
[Sun May  6 19:55:51 2012] Mean detx,y = (-11914.41, -2474.62) 
[Sun May  6 19:55:53 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May  6 19:56:05 2012] Binned source spectrum to 10 counts/bin
[Sun May  6 19:56:05 2012] Setting source spectrum file to fullrun_mos2_xmm0411080701_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Sun May  6 19:56:05 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0411080701_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Sun May  6 20:25:50 2012] Not generating rmf since there are only 23 counts
[Sun May  6 20:25:50 2012] rmf not generated due to insufficient counts
[Sun May  6 20:53:30 2012] Updating aperture counts using extracted products
[Sun May  6 20:53:30 2012] Error reading totcts from fullrun_mos2_xmm0411080701_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Sun May  6 20:53:32 2012] Calculating source flux in energy range 0.30-8.00
[Sun May  6 20:53:32 2012] Using photon index=1.80, rate=0.00131, arf fullrun_mos2_xmm0411080701_pi300-10000_pass1_cl_src9.arf
[Sun May  6 20:53:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May  6 20:53:32 2012] Updating source flux to 3.2e-14
[Sun May  6 20:54:39 2012] Source 9 has fewer than 100.000000 counts, skipping spectral fitting