[Sun May  6 10:18:35 2012] Detection parameters:
  Position = (232.1, 354.5) = 11 4 49.34 38 18 10.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 45.6 +/- 9.1
  Background counts = 12.5
  Rate = 0.003 +/- 0.0007

[Sun May  6 10:18:37 2012] Off-axis axis estimate = 6.30'
[Sun May  6 12:22:07 2012] Using EEF radius (= 9.58 ")to estimate initial spatial extent for simple fitting
[Sun May  6 12:22:07 2012] Initial guess for spatial extent in simple fitting = 9.58"
[Sun May  6 12:22:07 2012] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.856
[Sun May  6 12:22:07 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 9.58"
[Sun May  6 14:24:08 2012] fullrun_mos2_xmm0411080701_pi300-10000_cl_pass0_src16.ximg exists
[Sun May  6 14:24:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411080701_pi300-10000_cl_pass0_src16.csv
[Sun May  6 14:24:08 2012] fullrun_mos2_xmm0411080701_pi300-10000_cl_pass0_src16_1.ximg exists
[Sun May  6 14:24:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411080701_pi300-10000_cl_pass0_src16.csv
[Sun May  6 14:24:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0411080701_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0411080701_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 14:24:09 2012] fullrun_mos2_xmm0411080701_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Sun May  6 14:24:09 2012] fullrun_mos2_xmm0411080701_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Sun May  6 14:24:09 2012] Fit fullrun_mos2_xmm0411080701_pi300-10000_cl_pass0_tfrozen_src16 appears to have run properly
[Sun May  6 14:24:25 2012] Warning: source 16 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 11.790463 pixels away
[Sun May  6 14:24:25 2012] Vigneting correction estimate = 1.000000
[Sun May  6 14:24:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  6 14:24:25 2012] Assessing source extent using major
[Sun May  6 14:24:25 2012] Source does appear to be extended
[Sun May  6 14:24:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  6 17:11:22 2012] Using EEF radius (= 9.58 ")to estimate initial spatial extent for simple fitting
[Sun May  6 17:11:22 2012] Initial guess for spatial extent in simple fitting = 9.58"
[Sun May  6 17:11:22 2012] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.856
[Sun May  6 17:11:22 2012] Giving source the simple spatial ID 14 for pass 1, mean size = 9.58"
[Sun May  6 19:02:51 2012] fullrun_mos2_xmm0411080701_pi300-10000_cl_pass1_src14.ximg exists
[Sun May  6 19:02:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411080701_pi300-10000_cl_pass1_src14.csv
[Sun May  6 19:02:51 2012] fullrun_mos2_xmm0411080701_pi300-10000_cl_pass1_src14_1.ximg exists
[Sun May  6 19:02:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411080701_pi300-10000_cl_pass1_src14.csv
[Sun May  6 19:02:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0411080701_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0411080701_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 19:02:51 2012] fullrun_mos2_xmm0411080701_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Sun May  6 19:02:51 2012] fullrun_mos2_xmm0411080701_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Sun May  6 19:02:51 2012] Fit fullrun_mos2_xmm0411080701_pi300-10000_cl_pass1_tfrozen_src14 appears to have run properly
[Sun May  6 19:03:08 2012] Spatial fit model total counts = 176.880000, observed total counts = 168.000000
[Sun May  6 19:03:08 2012] Offset between fit and detection position for source 3 = 0.359898 pixels
[Sun May  6 19:03:08 2012] 177.493200 total counts/ 146.220000 bgd. counts: snr = 2.586241
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.359898 pixels
  Position = (231.9, 354.8) = 11 4 49.40 38 18 10.4
  Extent = 3.3 (2.4-4.7)", rotation angle = 0
  Source counts = 31.3 +/- 13.3
  Background counts = 146.2
  Rate = 0.002 +/- 0.0007
[Sun May  6 19:03:08 2012] Vigneting correction estimate = 1.000000
[Sun May  6 19:03:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  6 19:03:08 2012] Assessing source extent using major axis lower bound
[Sun May  6 19:03:08 2012] Source does appear to be extended
[Sun May  6 19:03:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  6 19:49:20 2012] XMMSAS src. selection expression = ellipse(20126.910960, 30818.477340, 199.230606, 199.230606, 0.000000, X, Y)
[Sun May  6 19:49:20 2012] Writing source region out to fullrun_mos2_xmm0411080701_pi300-10000_pass1_cl_src3_src.reg
[Sun May  6 19:49:20 2012] Extracting stamp from image fullrun_mos2_xmm0411080701_pi300-10000_cl_sm2.00.img.gz, (220, 343) - (243, 366)
[Sun May  6 19:49:20 2012] XMMSAS bgd. selection expression = annulus(20126.910960, 30818.477340, 332.051010, 664.102019, X, Y)
[Sun May  6 19:49:20 2012] Writing fullrun_mos2_xmm0411080701_pi300-10000_pass1_cl_src3.gif
[Sun May  6 19:58:49 2012] Mean detx,y = (-2455.28, -8261.14) 
[Sun May  6 19:58:54 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May  6 19:59:06 2012] Binned source spectrum to 10 counts/bin
[Sun May  6 19:59:06 2012] Setting source spectrum file to fullrun_mos2_xmm0411080701_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun May  6 19:59:06 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0411080701_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sun May  6 20:41:58 2012] Not generating rmf since there are only 31 counts
[Sun May  6 20:41:58 2012] rmf not generated due to insufficient counts
[Sun May  6 20:53:30 2012] Updating aperture counts using extracted products
[Sun May  6 20:53:31 2012] Error reading totcts from fullrun_mos2_xmm0411080701_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun May  6 20:53:32 2012] Calculating source flux in energy range 0.30-8.00
[Sun May  6 20:53:32 2012] Using photon index=1.80, rate=0.00171, arf fullrun_mos2_xmm0411080701_pi300-10000_pass1_cl_src3.arf
[Sun May  6 20:53:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May  6 20:53:32 2012] Updating source flux to 4.2e-14
[Sun May  6 20:54:39 2012] Source 3 has fewer than 100.000000 counts, skipping spectral fitting