[Sun May 6 10:18:31 2012] Detection parameters: Position = (330.1, 178.0) = 11 4 13.15 38 5 20.7 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 42.3 +/- 9.4 Background counts = 10.6 Rate = 0.004 +/- 0.0008 [Sun May 6 10:18:33 2012] Off-axis axis estimate = 9.03' [Sun May 6 10:19:34 2012] Using EEF radius (= 10.94 ")to estimate initial spatial extent for simple fitting [Sun May 6 10:19:34 2012] Initial guess for spatial extent in simple fitting = 10.94" [Sun May 6 10:19:34 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.990 [Sun May 6 10:19:34 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 10.94" [Sun May 6 12:22:06 2012] fullrun_mos1_xmm0411080701_pi300-10000_cl_pass0_src9.ximg exists [Sun May 6 12:22:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0411080701_pi300-10000_cl_pass0_src9.csv [Sun May 6 12:22:06 2012] fullrun_mos1_xmm0411080701_pi300-10000_cl_pass0_src9_1.ximg exists [Sun May 6 12:22:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0411080701_pi300-10000_cl_pass0_src9.csv [Sun May 6 12:22:06 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0411080701_pi300-10000_cl_pass0_src9_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0411080701_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 6 12:22:07 2012] fullrun_mos1_xmm0411080701_pi300-10000_cl_pass0_tfrozen_src9.ximg exists [Sun May 6 12:22:07 2012] fullrun_mos1_xmm0411080701_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists [Sun May 6 12:22:07 2012] Fit fullrun_mos1_xmm0411080701_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly [Sun May 6 14:24:17 2012] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 11.376672 pixels away [Sun May 6 14:24:17 2012] Vigneting correction estimate = 1.000000 [Sun May 6 14:24:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 6 14:24:17 2012] Assessing source extent using major [Sun May 6 14:24:17 2012] Source does appear to be extended [Sun May 6 14:24:17 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sun May 6 14:24:17 2012] Source is confused with source 8 [Sun May 6 14:24:35 2012] Using EEF radius (= 10.94 ")to estimate initial spatial extent for simple fitting [Sun May 6 14:24:35 2012] Initial guess for spatial extent in simple fitting = 10.94" [Sun May 6 14:24:35 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.990 [Sun May 6 14:24:35 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 10.94" [Sun May 6 17:11:21 2012] fullrun_mos1_xmm0411080701_pi300-10000_cl_pass1_src9.ximg exists [Sun May 6 17:11:21 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0411080701_pi300-10000_cl_pass1_src9.csv [Sun May 6 17:11:21 2012] fullrun_mos1_xmm0411080701_pi300-10000_cl_pass1_src9_1.ximg exists [Sun May 6 17:11:21 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0411080701_pi300-10000_cl_pass1_src9.csv [Sun May 6 17:11:21 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0411080701_pi300-10000_cl_pass1_src9_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0411080701_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 6 17:11:21 2012] fullrun_mos1_xmm0411080701_pi300-10000_cl_pass1_tfrozen_src9.ximg exists [Sun May 6 17:11:21 2012] fullrun_mos1_xmm0411080701_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists [Sun May 6 17:11:21 2012] Fit fullrun_mos1_xmm0411080701_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly [Sun May 6 19:03:00 2012] Source 9 is offset by -5.281416 and -4.651522 pixels which is larger than 2 X fitted extent = 1.670175 x 1.670175, not incorporating fit results [Sun May 6 19:03:00 2012] Spatial fit model total counts = 297.957000, observed total counts = 302.000000 [Sun May 6 19:03:00 2012] Offset between fit and detection position for source 9 = 1.941096 pixels [Sun May 6 19:03:00 2012] Warning, changing simple spatial fit ID from 9 to 8 [Sun May 6 19:03:00 2012] 303.441800 total counts/ 60.289800 bgd. counts: snr = 31.315253 Spatial fit parameters: Offset between fit and detection position for source 9 = 1.941096 pixels Position = (328.6, 179.2) = 11 4 13.71 38 5 26.7 Extent = 27.3 (27.2-27.4)", rotation angle = 0 Source counts = 243.2 +/- 17.4 Background counts = 60.3 Rate = 0.01 +/- 0.001 [Sun May 6 19:03:00 2012] Vigneting correction estimate = 1.000000 [Sun May 6 19:03:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 6 19:03:00 2012] Assessing source extent using major axis lower bound [Sun May 6 19:03:00 2012] Source does appear to be extended [Sun May 6 19:03:00 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sun May 6 19:03:19 2012] XMMSAS src. selection expression = ellipse(28537.502000, 15543.002000, 1640.934047, 1640.934047, 0.000000, X, Y) [Sun May 6 19:03:19 2012] Writing source region out to fullrun_mos1_xmm0411080701_pi300-10000_pass1_cl_src9_src.reg [Sun May 6 19:03:19 2012] Extracting stamp from image fullrun_mos1_xmm0411080701_pi300-10000_cl_sm2.00.img.gz, (234, 85) - (423, 274) [Sun May 6 19:03:19 2012] XMMSAS bgd. selection expression = annulus(28537.502000, 15543.002000, 2734.890079, 5469.780157, X, Y) && !ellipse(27684.133270, 17594.464386, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27972.770893, 16975.538643, 1695.192049, 576.900427, 66.761844, X, Y) && !ellipse(28301.844200, 16237.402800, 1695.192049, 499.542414, 65.519100, X, Y) && !ellipse(28862.620411, 14837.671171, 1778.760051, 527.160746, 68.794835, X, Y) && !ellipse(26892.476000, 14684.802200, 943.144027, 943.144027, 0.000000, X, Y) && !ellipse(28923.874770, 14567.331647, 1824.504052, 500.379222, 61.888717, X, Y) && !ellipse(29679.847107, 13279.047470, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29942.839840, 12190.099956, 1824.504052, 668.735195, 248.230113, X, Y) && !ellipse(29828.763600, 12636.442000, 1758.160051, 1758.160051, 0.000000, X, Y) && !ellipse(30141.772000, 11505.950000, 1725.816050, 1725.816050, 0.000000, X, Y) && !ellipse(30310.817949, 11137.914560, 2035.192059, 580.244899, 248.296794, X, Y) [Sun May 6 19:03:19 2012] Writing fullrun_mos1_xmm0411080701_pi300-10000_pass1_cl_src9.gif [Sun May 6 19:09:15 2012] Mean detx,y = (9175.47, -24.55) [Sun May 6 19:09:18 2012] Setting backscal keywords in source and bgd. spectrum [Sun May 6 19:10:10 2012] Binned source spectrum to 10 counts/bin [Sun May 6 19:10:10 2012] Setting source spectrum file to fullrun_mos1_xmm0411080701_pi300-10000_pass1_cl_src9_src_b10.pi.gz [Sun May 6 19:10:10 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0411080701_pi300-10000_pass1_cl_src9_bgd.pi.gz [Sun May 6 20:53:27 2012] Updating aperture counts using extracted products [Sun May 6 20:53:27 2012] Error reading totcts from fullrun_mos1_xmm0411080701_pi300-10000_pass1_cl_src9_src_b10.pi.gz [Sun May 6 20:53:28 2012] Calculating source flux in energy range 0.30-8.00 [Sun May 6 20:53:28 2012] Using photon index=1.80, rate=0.0133, arf fullrun_mos1_xmm0411080701_pi300-10000_pass1_cl_src9.arf [Sun May 6 20:53:28 2012] Assuming count rate is from the 0.30-10.00 bandpass [Sun May 6 20:53:28 2012] Updating source flux to 1.8e-13 [Sun May 6 20:53:34 2012] Flag b found in src. 9 procflags, skipping spectral fitting [Sun May 6 20:53:34 2012] Flag c found in src. 9 procflags, skipping spectral fitting