[Sun May  6 10:18:31 2012] Detection parameters:
  Position = (308.7, 169.2) = 11 4 21.02 38 4 41.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 34.8 +/- 8.8
  Background counts = 10.9
  Rate = 0.003 +/- 0.0008

[Sun May  6 10:18:33 2012] Off-axis axis estimate = 9.40'
[Sun May  6 10:19:34 2012] Using EEF radius (= 11.13 ")to estimate initial spatial extent for simple fitting
[Sun May  6 10:19:34 2012] Initial guess for spatial extent in simple fitting = 11.13"
[Sun May  6 10:19:34 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.962
[Sun May  6 10:19:34 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 11.13"
[Sun May  6 12:22:06 2012] fullrun_mos1_xmm0411080701_pi300-10000_cl_pass0_src11.ximg exists
[Sun May  6 12:22:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0411080701_pi300-10000_cl_pass0_src11.csv
[Sun May  6 12:22:06 2012] fullrun_mos1_xmm0411080701_pi300-10000_cl_pass0_src11_1.ximg exists
[Sun May  6 12:22:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0411080701_pi300-10000_cl_pass0_src11.csv
[Sun May  6 12:22:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0411080701_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0411080701_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 12:22:07 2012] fullrun_mos1_xmm0411080701_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sun May  6 12:22:07 2012] fullrun_mos1_xmm0411080701_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sun May  6 12:22:07 2012] Fit fullrun_mos1_xmm0411080701_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Sun May  6 14:24:17 2012] Spatial fit model total counts = 141.258000, observed total counts = 137.000000
[Sun May  6 14:24:17 2012] Offset between fit and detection position for source 11 = 0.953194 pixels
[Sun May  6 14:24:17 2012] 141.311900 total counts/ 78.569100 bgd. counts: snr = 7.078447
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.953194 pixels
  Position = (309.7, 169.3) = 11 4 20.67 38 4 43.9
  Extent = 11.8 (8.4-16.4)", rotation angle = 0
  Source counts = 62.7 +/- 11.9
  Background counts = 78.6
  Rate = 0.003 +/- 0.0006
[Sun May  6 14:24:17 2012] Vigneting correction estimate = 1.000000
[Sun May  6 14:24:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  6 14:24:17 2012] Assessing source extent using major axis lower bound
[Sun May  6 14:24:17 2012] Source does appear to be extended
[Sun May  6 14:24:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  6 14:24:35 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May  6 14:24:35 2012] Initial guess for spatial extent in simple fitting = 11.79"
[Sun May  6 14:24:35 2012] source mask rpix=2.7, npix_max = 41, mask sum = 48, frac = 1.164
[Sun May  6 14:24:35 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 11.79"
[Sun May  6 17:11:21 2012] fullrun_mos1_xmm0411080701_pi300-10000_cl_pass1_src11.ximg exists
[Sun May  6 17:11:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0411080701_pi300-10000_cl_pass1_src11.csv
[Sun May  6 17:11:21 2012] fullrun_mos1_xmm0411080701_pi300-10000_cl_pass1_src11_1.ximg exists
[Sun May  6 17:11:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0411080701_pi300-10000_cl_pass1_src11.csv
[Sun May  6 17:11:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0411080701_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0411080701_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 17:11:21 2012] fullrun_mos1_xmm0411080701_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Sun May  6 17:11:21 2012] fullrun_mos1_xmm0411080701_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Sun May  6 17:11:21 2012] Fit fullrun_mos1_xmm0411080701_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Sun May  6 19:03:00 2012] Warning, spatial fit 11 centroid is now closest to src. 6
[Sun May  6 19:03:00 2012] Vigneting correction estimate = 1.000000
[Sun May  6 19:03:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  6 19:03:00 2012] Assessing source extent using major axis lower bound
[Sun May  6 19:03:00 2012] Source does appear to be extended
[Sun May  6 19:03:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  6 19:03:19 2012] XMMSAS src. selection expression = ellipse(26892.476000, 14684.802200, 707.358020, 707.358020, 0.000000, X, Y)
[Sun May  6 19:03:19 2012] Writing source region out to fullrun_mos1_xmm0411080701_pi300-10000_pass1_cl_src11_src.reg
[Sun May  6 19:03:19 2012] Extracting stamp from image fullrun_mos1_xmm0411080701_pi300-10000_cl_sm2.00.img.gz, (269, 129) - (350, 210)
[Sun May  6 19:03:19 2012] XMMSAS bgd. selection expression = annulus(26892.476000, 14684.802200, 1178.930034, 2357.860068, X, Y) && !ellipse(27684.133270, 17594.464386, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27972.770893, 16975.538643, 1695.192049, 576.900427, 66.761844, X, Y) && !ellipse(28301.844200, 16237.402800, 1695.192049, 499.542414, 65.519100, X, Y) && !ellipse(28537.502000, 15543.002000, 2187.912063, 2187.912063, 0.000000, X, Y) && !ellipse(28862.620411, 14837.671171, 1778.760051, 527.160746, 68.794835, X, Y) && !ellipse(28923.874770, 14567.331647, 1824.504052, 500.379222, 61.888717, X, Y) && !ellipse(29679.847107, 13279.047470, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29942.839840, 12190.099956, 1824.504052, 668.735195, 248.230113, X, Y) && !ellipse(29828.763600, 12636.442000, 1758.160051, 1758.160051, 0.000000, X, Y) && !ellipse(30141.772000, 11505.950000, 1725.816050, 1725.816050, 0.000000, X, Y) && !ellipse(30310.817949, 11137.914560, 2035.192059, 580.244899, 248.296794, X, Y)
[Sun May  6 19:03:19 2012] Writing fullrun_mos1_xmm0411080701_pi300-10000_pass1_cl_src11.gif
[Sun May  6 19:11:12 2012] Mean detx,y = (9388.14, 1836.77) 
[Sun May  6 19:11:16 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May  6 19:11:36 2012] Binned source spectrum to 10 counts/bin
[Sun May  6 19:11:36 2012] Setting source spectrum file to fullrun_mos1_xmm0411080701_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sun May  6 19:11:36 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0411080701_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Sun May  6 19:34:15 2012] Not generating rmf since there are only 62 counts
[Sun May  6 19:34:15 2012] rmf not generated due to insufficient counts
[Sun May  6 20:53:27 2012] Updating aperture counts using extracted products
[Sun May  6 20:53:27 2012] Error reading totcts from fullrun_mos1_xmm0411080701_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sun May  6 20:53:28 2012] Calculating source flux in energy range 0.30-8.00
[Sun May  6 20:53:28 2012] Using photon index=1.80, rate=0.00342, arf fullrun_mos1_xmm0411080701_pi300-10000_pass1_cl_src11.arf
[Sun May  6 20:53:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May  6 20:53:28 2012] Updating source flux to 5.4e-14
[Sun May  6 20:53:34 2012] Source 11 has fewer than 100.000000 counts, skipping spectral fitting