[Thu Dec 22 01:20:57 2011] Detection parameters:
  Position = (455.8, 299.3) = 15 49 41.65 -54 19 46.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 67.4 +/- 10.7
  Background counts = 7.0
  Rate = 0.008 +/- 0.001

[Thu Dec 22 01:20:57 2011] Off-axis axis estimate = 11.41'
[Thu Dec 22 02:39:21 2011] Using EEF radius (= 12.13 ")to estimate initial spatial extent for simple fitting
[Thu Dec 22 02:39:21 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Dec 22 02:39:21 2011] Initial guess for spatial extent in simple fitting = 12.13"
[Thu Dec 22 02:39:21 2011] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.970
[Thu Dec 22 02:39:21 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 12.13"
[Thu Dec 22 03:06:24 2011] fullrun_mos2_xmm0410581901_pi300-10000_cl_pass0_src3.ximg exists
[Thu Dec 22 03:06:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0410581901_pi300-10000_cl_pass0_src3.csv
[Thu Dec 22 03:06:24 2011] fullrun_mos2_xmm0410581901_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Dec 22 03:06:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0410581901_pi300-10000_cl_pass0_src3.csv
[Thu Dec 22 03:06:24 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0410581901_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0410581901_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 22 03:06:24 2011] fullrun_mos2_xmm0410581901_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Dec 22 03:06:24 2011] fullrun_mos2_xmm0410581901_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Dec 22 03:06:24 2011] Fit fullrun_mos2_xmm0410581901_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Thu Dec 22 03:06:40 2011] Spatial fit model total counts = 140.997000, observed total counts = 141.000000
[Thu Dec 22 03:06:40 2011] Offset between fit and detection position for source 6 = 0.292375 pixels
[Thu Dec 22 03:06:40 2011] 140.287000 total counts/ 95.480200 bgd. counts: snr = 4.585506
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.292375 pixels
  Position = (455.7, 299.6) = 15 49 41.73 -54 19 45.8
  Extent = 5.4 (4.3-7.6)", rotation angle = 0
  Source counts = 44.8 +/- 11.8
  Background counts = 95.5
  Rate = 0.003 +/- 0.0007
[Thu Dec 22 03:06:40 2011] Vigneting correction estimate = 1.000000
[Thu Dec 22 03:06:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 22 03:06:40 2011] Assessing source extent using major axis lower bound
[Thu Dec 22 03:06:40 2011] Source does appear to be extended
[Thu Dec 22 03:06:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 22 04:07:29 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Dec 22 04:07:29 2011] Initial guess for spatial extent in simple fitting = 5.41"
[Thu Dec 22 04:07:29 2011] source mask rpix=1.2, npix_max = 12, mask sum = 9, frac = 0.741
[Thu Dec 22 04:07:29 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 5.41"
[Thu Dec 22 04:29:09 2011] fullrun_mos2_xmm0410581901_pi300-10000_cl_pass1_src3.ximg exists
[Thu Dec 22 04:29:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0410581901_pi300-10000_cl_pass1_src3.csv
[Thu Dec 22 04:29:09 2011] fullrun_mos2_xmm0410581901_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu Dec 22 04:29:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0410581901_pi300-10000_cl_pass1_src3.csv
[Thu Dec 22 04:29:09 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0410581901_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0410581901_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 22 04:29:09 2011] fullrun_mos2_xmm0410581901_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu Dec 22 04:29:09 2011] fullrun_mos2_xmm0410581901_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Dec 22 04:29:09 2011] Fit fullrun_mos2_xmm0410581901_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Thu Dec 22 04:29:21 2011] Spatial fit model total counts = 133.996000, observed total counts = 134.000000
[Thu Dec 22 04:29:21 2011] Offset between fit and detection position for source 6 = 0.033985 pixels
[Thu Dec 22 04:29:21 2011] 132.600200 total counts/ 88.384100 bgd. counts: snr = 4.703199
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.033985 pixels
  Position = (455.7, 299.6) = 15 49 41.73 -54 19 45.7
  Extent = 5.4 (4.2-7.5)", rotation angle = 0
  Source counts = 44.2 +/- 11.5
  Background counts = 88.4
  Rate = 0.003 +/- 0.0007
[Thu Dec 22 04:29:21 2011] Vigneting correction estimate = 1.000000
[Thu Dec 22 04:29:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 22 04:29:21 2011] Assessing source extent using major axis lower bound
[Thu Dec 22 04:29:21 2011] Source does appear to be extended
[Thu Dec 22 04:29:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 22 05:57:37 2011] XMMSAS src. selection expression = ellipse(39596.132200, 26017.798200, 326.968209, 326.968209, 0.000000, X, Y)
[Thu Dec 22 05:57:37 2011] Writing source region out to fullrun_mos2_xmm0410581901_pi300-10000_pass1_cl_src6_src.reg
[Thu Dec 22 05:57:37 2011] Extracting stamp from image fullrun_mos2_xmm0410581901_pi300-10000_cl_sm2.00.img.gz, (437, 281) - (474, 318)
[Thu Dec 22 05:57:37 2011] XMMSAS bgd. selection expression = annulus(39596.132200, 26017.798200, 544.947016, 1089.894031, X, Y)
[Thu Dec 22 05:57:37 2011] Writing fullrun_mos2_xmm0410581901_pi300-10000_pass1_cl_src6.gif
[Thu Dec 22 05:59:19 2011] Mean detx,y = (-12473.54, -2089.79) 
[Thu Dec 22 05:59:22 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Dec 22 05:59:35 2011] Binned source spectrum to 10 counts/bin
[Thu Dec 22 05:59:35 2011] Setting source spectrum file to fullrun_mos2_xmm0410581901_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Thu Dec 22 05:59:35 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0410581901_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Thu Dec 22 06:08:50 2011] Not generating rmf since there are only 44 counts
[Thu Dec 22 06:08:50 2011] rmf not generated due to insufficient counts
[Thu Dec 22 06:09:46 2011] Updating aperture counts using extracted products
[Thu Dec 22 06:09:46 2011] Error reading totcts from fullrun_mos2_xmm0410581901_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Thu Dec 22 06:09:46 2011] Calculating source flux in energy range 0.30-8.00
[Thu Dec 22 06:09:46 2011] Using photon index=1.80, rate=0.00267, arf fullrun_mos2_xmm0410581901_pi300-10000_pass1_cl_src6.arf
[Thu Dec 22 06:09:46 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Dec 22 06:09:46 2011] Updating source flux to 6.9e-14
[Thu Dec 22 06:10:16 2011] Source 6 has fewer than 100.000000 counts, skipping spectral fitting