[Thu Dec 22 01:20:22 2011] Detection parameters:
  Position = (407.1, 469.1) = 15 50 6.16 -54 7 20.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 38.6 +/- 7.9
  Background counts = 6.3
  Rate = 0.002 +/- 0.0005

[Thu Dec 22 01:20:23 2011] Off-axis axis estimate = 14.67'
[Thu Dec 22 02:01:34 2011] Using EEF radius (= 13.76 ")to estimate initial spatial extent for simple fitting
[Thu Dec 22 02:01:34 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Dec 22 02:01:34 2011] Initial guess for spatial extent in simple fitting = 13.76"
[Thu Dec 22 02:01:34 2011] source mask rpix=3.2, npix_max = 53, mask sum = 53, frac = 0.987
[Thu Dec 22 02:01:34 2011] Giving source the simple spatial ID 9 for pass 0, mean size = 13.76"
[Thu Dec 22 02:39:21 2011] fullrun_mos1_xmm0410581901_pi300-10000_cl_pass0_src9.ximg exists
[Thu Dec 22 02:39:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0410581901_pi300-10000_cl_pass0_src9.csv
[Thu Dec 22 02:39:21 2011] fullrun_mos1_xmm0410581901_pi300-10000_cl_pass0_src9_1.ximg exists
[Thu Dec 22 02:39:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0410581901_pi300-10000_cl_pass0_src9.csv
[Thu Dec 22 02:39:21 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0410581901_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0410581901_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 22 02:39:21 2011] fullrun_mos1_xmm0410581901_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Thu Dec 22 02:39:21 2011] fullrun_mos1_xmm0410581901_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Thu Dec 22 02:39:21 2011] Fit fullrun_mos1_xmm0410581901_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Thu Dec 22 03:06:35 2011] Spatial fit model total counts = 98.329400, observed total counts = 104.000000
[Thu Dec 22 03:06:35 2011] Offset between fit and detection position for source 3 = 0.573628 pixels
[Thu Dec 22 03:06:35 2011] 92.678300 total counts/ 50.832200 bgd. counts: snr = 5.869290
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.573628 pixels
  Position = (407.7, 469.0) = 15 50 5.88 -54 7 29.6
  Extent = 7.7 (5.8-9.8)", rotation angle = 0
  Source counts = 41.8 +/- 9.6
  Background counts = 50.8
  Rate = 0.003 +/- 0.0006
[Thu Dec 22 03:06:35 2011] Vigneting correction estimate = 1.000000
[Thu Dec 22 03:06:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 22 03:06:35 2011] Assessing source extent using major axis lower bound
[Thu Dec 22 03:06:35 2011] Source does appear to be extended
[Thu Dec 22 03:06:35 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 22 03:38:40 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Dec 22 03:38:40 2011] Initial guess for spatial extent in simple fitting = 7.68"
[Thu Dec 22 03:38:40 2011] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.974
[Thu Dec 22 03:38:40 2011] Giving source the simple spatial ID 9 for pass 1, mean size = 7.68"
[Thu Dec 22 04:07:29 2011] fullrun_mos1_xmm0410581901_pi300-10000_cl_pass1_src9.ximg exists
[Thu Dec 22 04:07:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0410581901_pi300-10000_cl_pass1_src9.csv
[Thu Dec 22 04:07:29 2011] fullrun_mos1_xmm0410581901_pi300-10000_cl_pass1_src9_1.ximg exists
[Thu Dec 22 04:07:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0410581901_pi300-10000_cl_pass1_src9.csv
[Thu Dec 22 04:07:29 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0410581901_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0410581901_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 22 04:07:29 2011] fullrun_mos1_xmm0410581901_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Thu Dec 22 04:07:29 2011] fullrun_mos1_xmm0410581901_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Thu Dec 22 04:07:29 2011] Fit fullrun_mos1_xmm0410581901_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Thu Dec 22 04:29:18 2011] Spatial fit model total counts = 81.235900, observed total counts = 85.000000
[Thu Dec 22 04:29:18 2011] Offset between fit and detection position for source 3 = 0.183071 pixels
[Thu Dec 22 04:29:18 2011] 75.561900 total counts/ 34.535700 bgd. counts: snr = 6.981153
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.183071 pixels
  Position = (407.8, 469.1) = 15 50 5.79 -54 7 29.4
  Extent = 7.2 (5.6-12.2)", rotation angle = 0
  Source counts = 41.0 +/- 8.7
  Background counts = 34.5
  Rate = 0.002 +/- 0.0005
[Thu Dec 22 04:29:18 2011] Vigneting correction estimate = 1.000000
[Thu Dec 22 04:29:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 22 04:29:18 2011] Assessing source extent using major axis lower bound
[Thu Dec 22 04:29:18 2011] Source does appear to be extended
[Thu Dec 22 04:29:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 22 05:43:10 2011] XMMSAS src. selection expression = ellipse(35433.760400, 40759.750000, 431.141243, 431.141243, 0.000000, X, Y)
[Thu Dec 22 05:43:10 2011] Writing source region out to fullrun_mos1_xmm0410581901_pi300-10000_pass1_cl_src3_src.reg
[Thu Dec 22 05:43:10 2011] Extracting stamp from image fullrun_mos1_xmm0410581901_pi300-10000_cl_sm2.00.img.gz, (383, 444) - (433, 494)
[Thu Dec 22 05:43:10 2011] XMMSAS bgd. selection expression = annulus(35433.760400, 40759.750000, 718.568739, 1437.137478, X, Y)
[Thu Dec 22 05:43:10 2011] Writing fullrun_mos1_xmm0410581901_pi300-10000_pass1_cl_src3.gif
[Thu Dec 22 05:47:29 2011] Mean detx,y = (12959.69, 8810.38) 
[Thu Dec 22 05:47:31 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Dec 22 05:47:54 2011] Binned source spectrum to 10 counts/bin
[Thu Dec 22 05:47:54 2011] Setting source spectrum file to fullrun_mos1_xmm0410581901_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Dec 22 05:47:54 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0410581901_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Thu Dec 22 05:57:18 2011] Not generating rmf since there are only 41 counts
[Thu Dec 22 05:57:18 2011] rmf not generated due to insufficient counts
[Thu Dec 22 06:09:45 2011] Updating aperture counts using extracted products
[Thu Dec 22 06:09:45 2011] Error reading totcts from fullrun_mos1_xmm0410581901_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Dec 22 06:09:45 2011] Calculating source flux in energy range 0.30-8.00
[Thu Dec 22 06:09:45 2011] Using photon index=1.80, rate=0.00248, arf fullrun_mos1_xmm0410581901_pi300-10000_pass1_cl_src3.arf
[Thu Dec 22 06:09:46 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Dec 22 06:09:46 2011] Updating source flux to 7.8e-14
[Thu Dec 22 06:09:47 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting