[Tue Dec 27 23:57:05 2011] Detection parameters:
  Position = (283.0, 264.1) = 16 47 11.17 -45 53 8.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 84.6 +/- 16.0
  Background counts = 73.9
  Rate = 0.005 +/- 0.0009

[Tue Dec 27 23:57:06 2011] Off-axis axis estimate = 2.73'
[Wed Dec 28 00:04:14 2011] Using EEF radius (= 7.79 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 00:04:14 2011] Initial guess for spatial extent in simple fitting = 7.79"
[Wed Dec 28 00:04:14 2011] source mask rpix=1.8, npix_max = 21, mask sum = 12, frac = 0.571
[Wed Dec 28 00:04:14 2011] Giving source the simple spatial ID 12 for pass 0, mean size = 7.79"
[Wed Dec 28 01:55:00 2011] fullrun_pn_xmm0410580601_pi300-10000_cl_pass0_src12.ximg exists
[Wed Dec 28 01:55:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0410580601_pi300-10000_cl_pass0_src12.csv
[Wed Dec 28 01:55:00 2011] fullrun_pn_xmm0410580601_pi300-10000_cl_pass0_src12_1.ximg exists
[Wed Dec 28 01:55:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0410580601_pi300-10000_cl_pass0_src12.csv
[Wed Dec 28 01:55:00 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0410580601_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0410580601_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 01:55:00 2011] fullrun_pn_xmm0410580601_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Wed Dec 28 01:55:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0410580601_pi300-10000_cl_pass0_tfrozen_src12.csv
[Wed Dec 28 01:55:00 2011] fullrun_pn_xmm0410580601_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Wed Dec 28 01:55:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0410580601_pi300-10000_cl_pass0_tfrozen_src12.csv
[Wed Dec 28 01:55:00 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0410580601_pi300-10000_cl_pass0_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0410580601_pi300-10000_cl_pass0_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 12:19:14 2011] Source 12 is offset by 7.193630 and 6.233529 pixels which is larger than
2 X fitted extent = 7.165380 x 7.165380, not incorporating fit results
[Wed Dec 28 12:19:14 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 12:19:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 12:19:14 2011] Assessing source extent using major
[Wed Dec 28 12:19:14 2011] Source does appear to be extended
[Wed Dec 28 12:19:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 12:20:06 2011] Using EEF radius (= 7.79 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 12:20:06 2011] Initial guess for spatial extent in simple fitting = 7.79"
[Wed Dec 28 12:20:06 2011] source mask rpix=1.8, npix_max = 21, mask sum = 12, frac = 0.571
[Wed Dec 28 12:20:06 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 7.79"
[Wed Dec 28 14:03:13 2011] fullrun_pn_xmm0410580601_pi300-10000_cl_pass1_src11.ximg exists
[Wed Dec 28 14:03:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0410580601_pi300-10000_cl_pass1_src11.csv
[Wed Dec 28 14:03:13 2011] fullrun_pn_xmm0410580601_pi300-10000_cl_pass1_src11_1.ximg exists
[Wed Dec 28 14:03:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0410580601_pi300-10000_cl_pass1_src11.csv
[Wed Dec 28 14:03:13 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0410580601_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0410580601_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 14:03:13 2011] fullrun_pn_xmm0410580601_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Wed Dec 28 14:03:13 2011] fullrun_pn_xmm0410580601_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Wed Dec 28 14:03:13 2011] Fit fullrun_pn_xmm0410580601_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Wed Dec 28 22:04:56 2011] Source 12 is offset by -1.994522 and -8.050908 pixels which is larger than
2 X fitted extent = 2.822418 x 2.822418, not incorporating fit results
[Wed Dec 28 22:04:56 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 22:04:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 22:04:56 2011] Assessing source extent using major
[Wed Dec 28 22:04:56 2011] Source does appear to be extended
[Wed Dec 28 22:04:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 22:05:24 2011] XMMSAS src. selection expression = ellipse(24575.125824, 22929.459015, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Dec 28 22:05:24 2011] Writing source region out to fullrun_pn_xmm0410580601_pi300-10000_pass1_cl_src12_src.reg
[Wed Dec 28 22:05:24 2011] Extracting stamp from image fullrun_pn_xmm0410580601_pi300-10000_cl_sm2.00.img.gz, (246, 227) - (321, 302)
[Wed Dec 28 22:05:24 2011] XMMSAS bgd. selection expression = annulus(24575.125824, 22929.459015, 1087.500000, 2175.000000, X, Y) && !ellipse(24803.316000, 24209.928000, 1328.138438, 1328.138438, 0.000000, X, Y) && !ellipse(25875.755646, 25712.481964, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26002.799400, 26153.271200, 1049.624030, 1049.624030, 0.000000, X, Y) && !ellipse(26669.238000, 25235.812000, 1109.760032, 1109.760032, 0.000000, X, Y)
[Wed Dec 28 22:05:24 2011] Writing fullrun_pn_xmm0410580601_pi300-10000_pass1_cl_src12.gif
[Wed Dec 28 22:36:06 2011] Mean detx,y = (243.13, -1455.85) 
[Wed Dec 28 22:36:15 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Dec 28 22:37:26 2011] Binned source spectrum to 10 counts/bin
[Wed Dec 28 22:37:27 2011] Setting source spectrum file to fullrun_pn_xmm0410580601_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Wed Dec 28 22:37:27 2011] Setting bgd. spectrum file to fullrun_pn_xmm0410580601_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Wed Dec 28 23:59:52 2011] Not generating rmf since there are only 84 counts
[Wed Dec 28 23:59:52 2011] rmf not generated due to insufficient counts
[Thu Dec 29 03:18:54 2011] Updating aperture counts using extracted products
[Thu Dec 29 03:18:54 2011] Error reading totcts from fullrun_pn_xmm0410580601_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Thu Dec 29 03:18:55 2011] Calculating source flux in energy range 0.30-8.00
[Thu Dec 29 03:18:55 2011] Using photon index=1.80, rate=0.00453, arf fullrun_pn_xmm0410580601_pi300-10000_pass1_cl_src12.arf
[Thu Dec 29 03:18:55 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Dec 29 03:18:55 2011] Updating source flux to 1.2e-14
[Thu Dec 29 03:28:09 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting