[Tue Dec 27 23:59:02 2011] Detection parameters:
  Position = (395.9, 428.0) = 16 46 24.27 -45 41 27.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1228.4 +/- 44.5
  Background counts = 33.4
  Rate = 0.06 +/- 0.002

[Tue Dec 27 23:59:03 2011] Off-axis axis estimate = 11.76'
[Wed Dec 28 08:29:29 2011] Using EEF radius (= 12.31 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 08:29:29 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Dec 28 08:29:29 2011] Initial guess for spatial extent in simple fitting = 12.31"
[Wed Dec 28 08:29:29 2011] source mask rpix=2.8, npix_max = 44, mask sum = 36, frac = 0.812
[Wed Dec 28 08:29:29 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 12.31"
[Wed Dec 28 12:18:58 2011] fullrun_mos2_xmm0410580601_pi300-10000_cl_pass0_src2.ximg exists
[Wed Dec 28 12:18:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0410580601_pi300-10000_cl_pass0_src2.csv
[Wed Dec 28 12:18:58 2011] fullrun_mos2_xmm0410580601_pi300-10000_cl_pass0_src2_1.ximg exists
[Wed Dec 28 12:18:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0410580601_pi300-10000_cl_pass0_src2.csv
[Wed Dec 28 12:18:58 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0410580601_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0410580601_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 12:18:58 2011] fullrun_mos2_xmm0410580601_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Wed Dec 28 12:18:59 2011] fullrun_mos2_xmm0410580601_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Wed Dec 28 12:18:59 2011] Fit fullrun_mos2_xmm0410580601_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Wed Dec 28 12:19:38 2011] Warning, spatial fit 2 centroid is now closest to src. 5
[Wed Dec 28 12:19:38 2011] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 10.251653 pixels away
[Wed Dec 28 12:19:38 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 12:19:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 12:19:38 2011] Assessing source extent using major
[Wed Dec 28 12:19:38 2011] Source does appear to be extended
[Wed Dec 28 12:19:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 12:19:38 2011] Source is confused with source 6
[Wed Dec 28 12:19:38 2011] Source is confused with source 10
[Wed Dec 28 12:19:38 2011] Source is confused with source 4
[Wed Dec 28 12:19:38 2011] Source is confused with source 5
[Wed Dec 28 19:13:06 2011] Using EEF radius (= 12.31 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 19:13:06 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Dec 28 19:13:06 2011] Initial guess for spatial extent in simple fitting = 12.31"
[Wed Dec 28 19:13:06 2011] source mask rpix=2.8, npix_max = 44, mask sum = 36, frac = 0.812
[Wed Dec 28 19:13:06 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 12.31"
[Wed Dec 28 22:04:47 2011] fullrun_mos2_xmm0410580601_pi300-10000_cl_pass1_src2.ximg exists
[Wed Dec 28 22:04:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0410580601_pi300-10000_cl_pass1_src2.csv
[Wed Dec 28 22:04:47 2011] fullrun_mos2_xmm0410580601_pi300-10000_cl_pass1_src2_1.ximg exists
[Wed Dec 28 22:04:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0410580601_pi300-10000_cl_pass1_src2.csv
[Wed Dec 28 22:04:47 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0410580601_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0410580601_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 22:04:47 2011] fullrun_mos2_xmm0410580601_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Wed Dec 28 22:04:47 2011] fullrun_mos2_xmm0410580601_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Wed Dec 28 22:04:47 2011] Fit fullrun_mos2_xmm0410580601_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Wed Dec 28 22:05:09 2011] Warning, spatial fit 2 centroid is now closest to src. 10
[Wed Dec 28 22:05:09 2011] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 30.419574 pixels away
[Wed Dec 28 22:05:09 2011] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 10.251653 pixels away
[Wed Dec 28 22:05:09 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 22:05:09 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 22:05:09 2011] Assessing source extent using major
[Wed Dec 28 22:05:09 2011] Source does appear to be extended
[Wed Dec 28 22:05:09 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 29 01:59:09 2011] Counts = 1228.434814, rescaling region sizes by 2.000000
[Thu Dec 29 01:59:09 2011] XMMSAS src. selection expression = ellipse(34397.573975, 37186.536224, 1305.000000, 1305.000000, 0.000000, X, Y)
[Thu Dec 29 01:59:09 2011] Writing source region out to fullrun_mos2_xmm0410580601_pi300-10000_pass1_cl_src3_src.reg
[Thu Dec 29 01:59:09 2011] Extracting stamp from image fullrun_mos2_xmm0410580601_pi300-10000_cl_sm2.00.img.gz, (321, 353) - (471, 503)
[Thu Dec 29 01:59:09 2011] XMMSAS bgd. selection expression = annulus(34397.573975, 37186.536224, 4350.000000, 8700.000000, X, Y) && !ellipse(33853.484000, 36146.018000, 1936.392056, 1936.392056, 0.000000, X, Y) && !ellipse(34607.161800, 37501.982000, 1953.848056, 934.912027, 105.520200, X, Y) && !ellipse(37260.126000, 34908.408000, 515.135215, 515.135215, 0.000000, X, Y) && !ellipse(34774.601410, 37191.033844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34717.990875, 36760.316406, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36683.777222, 35198.561798, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37534.270721, 35413.032410, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Dec 29 01:59:09 2011] Writing fullrun_mos2_xmm0410580601_pi300-10000_pass1_cl_src3.gif
[Thu Dec 29 02:00:23 2011] Mean detx,y = (9917.88, -12911.03) 
[Thu Dec 29 02:00:26 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Dec 29 02:05:40 2011] Binned source spectrum to 10 counts/bin
[Thu Dec 29 02:05:40 2011] Setting source spectrum file to fullrun_mos2_xmm0410580601_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Dec 29 02:05:40 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0410580601_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Thu Dec 29 02:42:18 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Dec 29 02:42:18 2011] rmf not generated due to insufficient counts
[Thu Dec 29 03:19:01 2011] Updating aperture counts using extracted products
[Thu Dec 29 03:19:01 2011] Error reading totcts from fullrun_mos2_xmm0410580601_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Dec 29 03:19:02 2011] Calculating source flux in energy range 0.30-8.00
[Thu Dec 29 03:19:02 2011] Using photon index=1.80, rate=0.0596, arf fullrun_mos2_xmm0410580601_pi300-10000_pass1_cl_src3.arf
[Thu Dec 29 03:19:02 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Dec 29 03:19:02 2011] Updating source flux to 1.6e-12
[Thu Dec 29 03:24:34 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting