[Tue Dec 27 23:58:06 2011] Detection parameters:
  Position = (439.2, 399.0) = 16 46 6.26 -45 43 32.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 699.6 +/- 34.9
  Background counts = 28.0
  Rate = 0.03 +/- 0.002

[Tue Dec 27 23:58:07 2011] Off-axis axis estimate = 12.54'
[Wed Dec 28 01:55:00 2011] Using EEF radius (= 12.70 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 01:55:00 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Dec 28 01:55:00 2011] Initial guess for spatial extent in simple fitting = 12.70"
[Wed Dec 28 01:55:00 2011] source mask rpix=2.9, npix_max = 46, mask sum = 40, frac = 0.855
[Wed Dec 28 01:55:00 2011] Giving source the simple spatial ID 8 for pass 0, mean size = 12.70"
[Wed Dec 28 08:29:28 2011] fullrun_mos1_xmm0410580601_pi300-10000_cl_pass0_src8.ximg exists
[Wed Dec 28 08:29:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0410580601_pi300-10000_cl_pass0_src8.csv
[Wed Dec 28 08:29:28 2011] fullrun_mos1_xmm0410580601_pi300-10000_cl_pass0_src8_1.ximg exists
[Wed Dec 28 08:29:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0410580601_pi300-10000_cl_pass0_src8.csv
[Wed Dec 28 08:29:28 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0410580601_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0410580601_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 08:29:29 2011] fullrun_mos1_xmm0410580601_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Wed Dec 28 08:29:29 2011] fullrun_mos1_xmm0410580601_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Wed Dec 28 08:29:29 2011] Fit fullrun_mos1_xmm0410580601_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Wed Dec 28 12:19:30 2011] Warning, spatial fit 8 centroid is now closest to src. 12
[Wed Dec 28 12:19:30 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 12:19:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 12:19:30 2011] Assessing source extent using major
[Wed Dec 28 12:19:30 2011] Source does appear to be extended
[Wed Dec 28 12:19:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 14:03:13 2011] Using EEF radius (= 12.70 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 14:03:13 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Dec 28 14:03:13 2011] Initial guess for spatial extent in simple fitting = 12.70"
[Wed Dec 28 14:03:13 2011] source mask rpix=2.9, npix_max = 46, mask sum = 40, frac = 0.855
[Wed Dec 28 14:03:13 2011] Giving source the simple spatial ID 8 for pass 1, mean size = 12.70"
[Wed Dec 28 19:13:05 2011] fullrun_mos1_xmm0410580601_pi300-10000_cl_pass1_src8.ximg exists
[Wed Dec 28 19:13:05 2011] fullrun_mos1_xmm0410580601_pi300-10000_cl_pass1_src8_1.ximg exists
[Wed Dec 28 19:13:05 2011] Fit fullrun_mos1_xmm0410580601_pi300-10000_cl_pass1_src8 appears to have run properly
[Wed Dec 28 19:13:06 2011] fullrun_mos1_xmm0410580601_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Wed Dec 28 19:13:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0410580601_pi300-10000_cl_pass1_tfrozen_src8.csv
[Wed Dec 28 19:13:06 2011] fullrun_mos1_xmm0410580601_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Wed Dec 28 19:13:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0410580601_pi300-10000_cl_pass1_tfrozen_src8.csv
[Wed Dec 28 19:13:06 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0410580601_pi300-10000_cl_pass1_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0410580601_pi300-10000_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 22:05:04 2011] Source 5 is offset by 1.628809 and 0.992512 pixels which is larger than
2 X fitted extent = 1.601338 x 5.872230, not incorporating fit results
[Wed Dec 28 22:05:04 2011] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 16.359879 pixels away
[Wed Dec 28 22:05:04 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 22:05:04 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 22:05:04 2011] Assessing source extent using major
[Wed Dec 28 22:05:04 2011] Source does appear to be extended
[Wed Dec 28 22:05:04 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 29 00:10:49 2011] XMMSAS src. selection expression = ellipse(38165.110992, 34662.142334, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Dec 29 00:10:49 2011] Writing source region out to fullrun_mos1_xmm0410580601_pi300-10000_pass1_cl_src5_src.reg
[Thu Dec 29 00:10:49 2011] Extracting stamp from image fullrun_mos1_xmm0410580601_pi300-10000_cl_sm2.00.img.gz, (402, 361) - (477, 436)
[Thu Dec 29 00:10:49 2011] XMMSAS bgd. selection expression = annulus(38165.110992, 34662.142334, 1087.500000, 2175.000000, X, Y) && !ellipse(35268.574921, 37012.719421, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36845.676000, 34204.188000, 386.189611, 386.189611, 0.000000, X, Y) && !ellipse(36626.054800, 35151.770400, 466.909613, 466.909613, 0.000000, X, Y) && !ellipse(35767.680603, 33979.951141, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37673.331800, 35366.240000, 335.101610, 335.101610, 0.000000, X, Y) && !ellipse(36478.220000, 33481.080000, 501.432014, 501.432014, 0.000000, X, Y)
[Thu Dec 29 00:10:49 2011] Writing fullrun_mos1_xmm0410580601_pi300-10000_pass1_cl_src5.gif
[Thu Dec 29 00:19:12 2011] Mean detx,y = (-9983.33, -13543.37) 
[Thu Dec 29 00:19:15 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Dec 29 00:19:54 2011] Binned source spectrum to 10 counts/bin
[Thu Dec 29 00:19:54 2011] Setting source spectrum file to fullrun_mos1_xmm0410580601_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Thu Dec 29 00:19:54 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0410580601_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Thu Dec 29 01:10:55 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Dec 29 01:10:55 2011] rmf not generated due to insufficient counts
[Thu Dec 29 03:18:58 2011] Updating aperture counts using extracted products
[Thu Dec 29 03:18:58 2011] Error reading totcts from fullrun_mos1_xmm0410580601_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Thu Dec 29 03:19:00 2011] Calculating source flux in energy range 0.30-8.00
[Thu Dec 29 03:19:00 2011] Using photon index=1.80, rate=0.0339, arf fullrun_mos1_xmm0410580601_pi300-10000_pass1_cl_src5.arf
[Thu Dec 29 03:19:00 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Dec 29 03:19:00 2011] Updating source flux to 1.4e-12
[Thu Dec 29 03:19:05 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting