[Tue Dec 27 23:58:07 2011] Detection parameters:
  Position = (420.2, 386.7) = 16 46 14.15 -45 44 27.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 464.1 +/- 28.9
  Background counts = 31.6
  Rate = 0.02 +/- 0.001

[Tue Dec 27 23:58:07 2011] Off-axis axis estimate = 10.90'
[Wed Dec 28 01:55:00 2011] Using EEF radius (= 11.88 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 01:55:00 2011] Initial guess for spatial extent in simple fitting = 11.88"
[Wed Dec 28 01:55:00 2011] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.006
[Wed Dec 28 01:55:00 2011] Giving source the simple spatial ID 15 for pass 0, mean size = 11.88"
[Wed Dec 28 08:29:28 2011] fullrun_mos1_xmm0410580601_pi300-10000_cl_pass0_src15.ximg exists
[Wed Dec 28 08:29:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0410580601_pi300-10000_cl_pass0_src15.csv
[Wed Dec 28 08:29:28 2011] fullrun_mos1_xmm0410580601_pi300-10000_cl_pass0_src15_1.ximg exists
[Wed Dec 28 08:29:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0410580601_pi300-10000_cl_pass0_src15.csv
[Wed Dec 28 08:29:28 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0410580601_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0410580601_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 08:29:29 2011] fullrun_mos1_xmm0410580601_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Wed Dec 28 08:29:29 2011] fullrun_mos1_xmm0410580601_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Wed Dec 28 08:29:29 2011] Fit fullrun_mos1_xmm0410580601_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Wed Dec 28 12:19:30 2011] Source 17 is offset by 2.536616 and 1.154311 pixels which is larger than
2 X fitted extent = 2.063025 x 1.348680, not incorporating fit results
[Wed Dec 28 12:19:30 2011] Warning, spatial fit 15 centroid is now closest to src. 6
[Wed Dec 28 12:19:30 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 12:19:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 12:19:30 2011] Assessing source extent using major
[Wed Dec 28 12:19:30 2011] Source does appear to be extended
[Wed Dec 28 12:19:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 14:03:13 2011] Using EEF radius (= 11.88 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 14:03:13 2011] Initial guess for spatial extent in simple fitting = 11.88"
[Wed Dec 28 14:03:13 2011] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.006
[Wed Dec 28 14:03:13 2011] Giving source the simple spatial ID 13 for pass 1, mean size = 11.88"
[Wed Dec 28 19:13:06 2011] fullrun_mos1_xmm0410580601_pi300-10000_cl_pass1_src13.ximg exists
[Wed Dec 28 19:13:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0410580601_pi300-10000_cl_pass1_src13.csv
[Wed Dec 28 19:13:06 2011] fullrun_mos1_xmm0410580601_pi300-10000_cl_pass1_src13_1.ximg exists
[Wed Dec 28 19:13:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0410580601_pi300-10000_cl_pass1_src13.csv
[Wed Dec 28 19:13:06 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0410580601_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0410580601_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 19:13:06 2011] fullrun_mos1_xmm0410580601_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Wed Dec 28 19:13:06 2011] fullrun_mos1_xmm0410580601_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Wed Dec 28 19:13:06 2011] Fit fullrun_mos1_xmm0410580601_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Wed Dec 28 22:05:04 2011] Spatial fit model total counts = 1529.540000, observed total counts = 1530.000000
[Wed Dec 28 22:05:04 2011] Offset between fit and detection position for source 17 = 1.312837 pixels
[Wed Dec 28 22:05:04 2011] Warning, changing simple spatial fit ID from 13 to 4
[Wed Dec 28 22:05:04 2011] 1548.198000 total counts/ 1281.350000 bgd. counts: snr = 7.454698
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 1.312837 pixels
  Position = (419.8, 385.4) = 16 46 14.30 -45 44 33.4
  Extent = 6.3 (5.4-6.9)", rotation angle = 0
  Source counts = 266.8 +/- 39.3
  Background counts = 1281.3
  Rate = 0.01 +/- 0.002
[Wed Dec 28 22:05:04 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 22:05:04 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 22:05:04 2011] Assessing source extent using major axis lower bound
[Wed Dec 28 22:05:04 2011] Source does appear to be extended
[Wed Dec 28 22:05:04 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 29 00:10:49 2011] XMMSAS src. selection expression = ellipse(36478.220000, 33481.080000, 376.074011, 376.074011, 0.000000, X, Y)
[Thu Dec 29 00:10:49 2011] Writing source region out to fullrun_mos1_xmm0410580601_pi300-10000_pass1_cl_src17_src.reg
[Thu Dec 29 00:10:49 2011] Extracting stamp from image fullrun_mos1_xmm0410580601_pi300-10000_cl_sm2.00.img.gz, (398, 364) - (441, 407)
[Thu Dec 29 00:10:49 2011] XMMSAS bgd. selection expression = annulus(36478.220000, 33481.080000, 626.790018, 1253.580036, X, Y) && !ellipse(36845.676000, 34204.188000, 386.189611, 386.189611, 0.000000, X, Y) && !ellipse(36626.054800, 35151.770400, 466.909613, 466.909613, 0.000000, X, Y) && !ellipse(35767.680603, 33979.951141, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38165.110992, 34662.142334, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Dec 29 00:10:49 2011] Writing fullrun_mos1_xmm0410580601_pi300-10000_pass1_cl_src17.gif
[Thu Dec 29 00:37:38 2011] Mean detx,y = (-8949.94, -11967.12) 
[Thu Dec 29 00:37:41 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Dec 29 00:38:07 2011] Binned source spectrum to 10 counts/bin
[Thu Dec 29 00:38:07 2011] Setting source spectrum file to fullrun_mos1_xmm0410580601_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Thu Dec 29 00:38:07 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0410580601_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Thu Dec 29 03:18:58 2011] Updating aperture counts using extracted products
[Thu Dec 29 03:18:58 2011] Error reading totcts from fullrun_mos1_xmm0410580601_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Thu Dec 29 03:19:00 2011] Calculating source flux in energy range 0.30-8.00
[Thu Dec 29 03:19:00 2011] Using photon index=1.80, rate=0.0129, arf fullrun_mos1_xmm0410580601_pi300-10000_pass1_cl_src17.arf
[Thu Dec 29 03:19:00 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Dec 29 03:19:00 2011] Updating source flux to 4.2e-13
[Thu Dec 29 03:19:05 2011] Flag b found in src. 17 procflags, skipping spectral fitting