[Tue Dec 27 23:58:07 2011] Detection parameters:
  Position = (392.1, 430.0) = 16 46 25.85 -45 41 20.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 602.6 +/- 32.0
  Background counts = 39.8
  Rate = 0.03 +/- 0.002

[Tue Dec 27 23:58:07 2011] Off-axis axis estimate = 11.71'
[Wed Dec 28 01:55:00 2011] Using EEF radius (= 12.28 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 01:55:00 2011] Initial guess for spatial extent in simple fitting = 12.28"
[Wed Dec 28 01:55:00 2011] source mask rpix=2.8, npix_max = 44, mask sum = 36, frac = 0.815
[Wed Dec 28 01:55:00 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 12.28"
[Wed Dec 28 08:29:28 2011] fullrun_mos1_xmm0410580601_pi300-10000_cl_pass0_src11.ximg exists
[Wed Dec 28 08:29:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0410580601_pi300-10000_cl_pass0_src11.csv
[Wed Dec 28 08:29:28 2011] fullrun_mos1_xmm0410580601_pi300-10000_cl_pass0_src11_1.ximg exists
[Wed Dec 28 08:29:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0410580601_pi300-10000_cl_pass0_src11.csv
[Wed Dec 28 08:29:28 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0410580601_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0410580601_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 08:29:29 2011] fullrun_mos1_xmm0410580601_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Wed Dec 28 08:29:29 2011] fullrun_mos1_xmm0410580601_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Wed Dec 28 08:29:29 2011] Fit fullrun_mos1_xmm0410580601_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Wed Dec 28 12:19:30 2011] Spatial fit model total counts = 2007.230000, observed total counts = 2152.000000
[Wed Dec 28 12:19:30 2011] Offset between fit and detection position for source 16 = 1.667360 pixels
[Wed Dec 28 12:19:30 2011] 1741.510000 total counts/ 678.290000 bgd. counts: snr = 40.823988
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 1.667360 pixels
  Position = (390.5, 429.7) = 16 46 26.53 -45 41 20.9
  Extent = 13.9 (13.7-14.2)", rotation angle = 0
  Source counts = 1063.2 +/- 41.7
  Background counts = 678.3
  Rate = 0.05 +/- 0.002
[Wed Dec 28 12:19:30 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 12:19:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 12:19:30 2011] Assessing source extent using major axis lower bound
[Wed Dec 28 12:19:30 2011] Source does appear to be extended
[Wed Dec 28 12:19:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 12:19:30 2011] Source is confused with source 10
[Wed Dec 28 12:19:30 2011] Source is confused with source 24
[Wed Dec 28 12:19:30 2011] Source is confused with source 9
[Wed Dec 28 14:03:13 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Dec 28 14:03:13 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Dec 28 14:03:13 2011] Initial guess for spatial extent in simple fitting = 13.87"
[Wed Dec 28 14:03:13 2011] source mask rpix=3.2, npix_max = 54, mask sum = 49, frac = 0.901
[Wed Dec 28 14:03:13 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 13.87"
[Wed Dec 28 19:13:05 2011] fullrun_mos1_xmm0410580601_pi300-10000_cl_pass1_src10.ximg exists
[Wed Dec 28 19:13:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0410580601_pi300-10000_cl_pass1_src10.csv
[Wed Dec 28 19:13:05 2011] fullrun_mos1_xmm0410580601_pi300-10000_cl_pass1_src10_1.ximg exists
[Wed Dec 28 19:13:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0410580601_pi300-10000_cl_pass1_src10.csv
[Wed Dec 28 19:13:05 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0410580601_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0410580601_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 19:13:06 2011] fullrun_mos1_xmm0410580601_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Wed Dec 28 19:13:06 2011] fullrun_mos1_xmm0410580601_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Wed Dec 28 19:13:06 2011] Fit fullrun_mos1_xmm0410580601_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Wed Dec 28 22:05:04 2011] Warning, spatial fit 10 centroid is now closest to src. 9
[Wed Dec 28 22:05:04 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 22:05:04 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 22:05:04 2011] Assessing source extent using major axis lower bound
[Wed Dec 28 22:05:04 2011] Source does appear to be extended
[Wed Dec 28 22:05:04 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 29 00:10:49 2011] Counts = 1063.220000, rescaling region sizes by 2.000000
[Thu Dec 29 00:10:49 2011] XMMSAS src. selection expression = ellipse(33924.624800, 37337.998800, 1663.896048, 1663.896048, 0.000000, X, Y)
[Thu Dec 29 00:10:49 2011] Writing source region out to fullrun_mos1_xmm0410580601_pi300-10000_pass1_cl_src16_src.reg
[Thu Dec 29 00:10:49 2011] Extracting stamp from image fullrun_mos1_xmm0410580601_pi300-10000_cl_sm2.00.img.gz, (295, 334) - (486, 525)
[Thu Dec 29 00:10:49 2011] XMMSAS bgd. selection expression = annulus(33924.624800, 37337.998800, 5546.320160, 11092.640319, X, Y) && !ellipse(35268.574921, 37012.719421, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33840.296600, 36144.469086, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36845.676000, 34204.188000, 386.189611, 386.189611, 0.000000, X, Y) && !ellipse(36626.054800, 35151.770400, 466.909613, 466.909613, 0.000000, X, Y) && !ellipse(35767.680603, 33979.951141, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32421.600281, 35185.517639, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38165.110992, 34662.142334, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32379.013611, 35971.095673, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33939.224710, 36989.222908, 1915.016055, 239.376807, 105.457600, X, Y) && !ellipse(37673.331800, 35366.240000, 335.101610, 335.101610, 0.000000, X, Y) && !ellipse(36478.220000, 33481.080000, 501.432014, 501.432014, 0.000000, X, Y) && !ellipse(32525.710000, 37518.240000, 494.963214, 494.963214, 0.000000, X, Y) && !ellipse(32584.493543, 37090.645424, 1527.259886, 239.376807, 106.335025, X, Y) && !ellipse(33506.615173, 37268.669556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34050.343933, 37434.242493, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Dec 29 00:10:49 2011] Writing fullrun_mos1_xmm0410580601_pi300-10000_pass1_cl_src16.gif
[Thu Dec 29 00:20:47 2011] Mean detx,y = (-12267.34, -9539.92) 
[Thu Dec 29 00:20:52 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Dec 29 00:26:07 2011] Binned source spectrum to 10 counts/bin
[Thu Dec 29 00:26:07 2011] Setting source spectrum file to fullrun_mos1_xmm0410580601_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Thu Dec 29 00:26:07 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0410580601_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Thu Dec 29 03:18:58 2011] Updating aperture counts using extracted products
[Thu Dec 29 03:18:58 2011] Error reading totcts from fullrun_mos1_xmm0410580601_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Thu Dec 29 03:19:00 2011] Calculating source flux in energy range 0.30-8.00
[Thu Dec 29 03:19:00 2011] Using photon index=1.80, rate=0.0516, arf fullrun_mos1_xmm0410580601_pi300-10000_pass1_cl_src16.arf
[Thu Dec 29 03:19:00 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Dec 29 03:19:00 2011] Updating source flux to 1.4e-12
[Thu Dec 29 03:19:05 2011] Flag c found in src. 16 procflags, skipping spectral fitting