[Tue Dec 27 23:58:06 2011] Detection parameters:
  Position = (285.6, 279.0) = 16 47 10.09 -45 52 16.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 10286.5 +/- 121.1
  Background counts = 21.4
  Rate = 0.5 +/- 0.006

[Tue Dec 27 23:58:07 2011] Off-axis axis estimate = 1.69'
[Wed Dec 28 01:55:00 2011] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 01:55:00 2011] Initial guess for spatial extent in simple fitting = 7.27"
[Wed Dec 28 01:55:00 2011] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.060
[Wed Dec 28 01:55:00 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.27"
[Wed Dec 28 08:29:28 2011] fullrun_mos1_xmm0410580601_pi300-10000_cl_pass0_src1.ximg exists
[Wed Dec 28 08:29:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0410580601_pi300-10000_cl_pass0_src1.csv
[Wed Dec 28 08:29:28 2011] fullrun_mos1_xmm0410580601_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Dec 28 08:29:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0410580601_pi300-10000_cl_pass0_src1.csv
[Wed Dec 28 08:29:28 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0410580601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0410580601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 08:29:29 2011] fullrun_mos1_xmm0410580601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Dec 28 08:29:29 2011] fullrun_mos1_xmm0410580601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Dec 28 08:29:29 2011] Fit fullrun_mos1_xmm0410580601_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Dec 28 12:19:30 2011] Spatial fit model total counts = 9852.820000, observed total counts = 9853.000000
[Wed Dec 28 12:19:30 2011] Offset between fit and detection position for source 1 = 0.019634 pixels
[Wed Dec 28 12:19:30 2011] 9906.390000 total counts/ 3027.670000 bgd. counts: snr = 125.012478
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.019634 pixels
  Position = (285.6, 279.0) = 16 47 10.08 -45 52 17.1
  Extent = 5.3 (5.1-5.4)", rotation angle = 0
  Source counts = 6878.7 +/- 99.5
  Background counts = 3027.7
  Rate = 0.3 +/- 0.005
[Wed Dec 28 12:19:30 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 12:19:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 12:19:30 2011] Assessing source extent using major axis lower bound
[Wed Dec 28 12:19:30 2011] Source does appear to be extended
[Wed Dec 28 12:19:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 14:03:13 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Dec 28 14:03:13 2011] Initial guess for spatial extent in simple fitting = 5.25"
[Wed Dec 28 14:03:13 2011] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.029
[Wed Dec 28 14:03:13 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.25"
[Wed Dec 28 19:13:05 2011] fullrun_mos1_xmm0410580601_pi300-10000_cl_pass1_src1.ximg exists
[Wed Dec 28 19:13:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0410580601_pi300-10000_cl_pass1_src1.csv
[Wed Dec 28 19:13:05 2011] fullrun_mos1_xmm0410580601_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Dec 28 19:13:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0410580601_pi300-10000_cl_pass1_src1.csv
[Wed Dec 28 19:13:05 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0410580601_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0410580601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 19:13:06 2011] fullrun_mos1_xmm0410580601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Dec 28 19:13:06 2011] fullrun_mos1_xmm0410580601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Dec 28 19:13:06 2011] Fit fullrun_mos1_xmm0410580601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Dec 28 22:05:04 2011] Spatial fit model total counts = 9853.000000, observed total counts = 9853.000000
[Wed Dec 28 22:05:04 2011] Offset between fit and detection position for source 1 = 0.000733 pixels
[Wed Dec 28 22:05:04 2011] 9906.450000 total counts/ 3024.440000 bgd. counts: snr = 125.139038
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000733 pixels
  Position = (285.6, 279.0) = 16 47 10.08 -45 52 17.1
  Extent = 5.3 (5.1-5.4)", rotation angle = 0
  Source counts = 6882.0 +/- 99.5
  Background counts = 3024.4
  Rate = 0.3 +/- 0.005
[Wed Dec 28 22:05:04 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 22:05:04 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 22:05:04 2011] Assessing source extent using major axis lower bound
[Wed Dec 28 22:05:04 2011] Source does appear to be extended
[Wed Dec 28 22:05:04 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 29 00:10:49 2011] Counts = 6882.010000, rescaling region sizes by 2.000000
[Thu Dec 29 00:10:49 2011] XMMSAS src. selection expression = ellipse(24801.709200, 24221.377800, 631.020018, 631.020018, 0.000000, X, Y)
[Thu Dec 29 00:10:49 2011] Writing source region out to fullrun_mos1_xmm0410580601_pi300-10000_pass1_cl_src1_src.reg
[Thu Dec 29 00:10:49 2011] Extracting stamp from image fullrun_mos1_xmm0410580601_pi300-10000_cl_sm2.00.img.gz, (249, 243) - (322, 315)
[Thu Dec 29 00:10:49 2011] XMMSAS bgd. selection expression = annulus(24801.709200, 24221.377800, 2103.400061, 4206.800121, X, Y)
[Thu Dec 29 00:10:49 2011] Writing fullrun_mos1_xmm0410580601_pi300-10000_pass1_cl_src1.gif
[Thu Dec 29 00:10:57 2011] Mean detx,y = (280.16, -245.99) 
[Thu Dec 29 00:11:00 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Dec 29 00:12:11 2011] Binned source spectrum to 10 counts/bin
[Thu Dec 29 00:12:11 2011] Setting source spectrum file to fullrun_mos1_xmm0410580601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Dec 29 00:12:11 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0410580601_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Dec 29 03:18:56 2011] Updating aperture counts using extracted products
[Thu Dec 29 03:18:56 2011] Error reading totcts from fullrun_mos1_xmm0410580601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Dec 29 03:18:59 2011] Calculating source flux in energy range 0.30-8.00
[Thu Dec 29 03:18:59 2011] Using photon index=1.80, rate=0.334, arf fullrun_mos1_xmm0410580601_pi300-10000_pass1_cl_src1.arf
[Thu Dec 29 03:18:59 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Dec 29 03:18:59 2011] Updating source flux to 3.3e-12
[Thu Dec 29 03:24:34 2011] Reading fit data from xmm0410580601/analysis//spectral/fullrun_mos1_xmm0410580601_pi300-10000_pass1_cl_src1_pl.csv
[Thu Dec 29 03:24:34 2011] Spectral fit parameter nH value = 4.03624e+22
[Thu Dec 29 03:24:34 2011] Spectral fit parameter PhoIndex value = 4.15562
[Thu Dec 29 03:24:34 2011] Failed to get F(0.3-8.0) from xmm0410580601/analysis//spectral/fullrun_mos1_xmm0410580601_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Dec 29 03:24:34 2011] Calculating source flux in energy range 0.30-8.00
[Thu Dec 29 03:24:34 2011] Using Nh = 4e+22, photon index=4.16, rate=0.334, arf fullrun_mos1_xmm0410580601_pi300-10000_pass1_cl_src1.arf
[Thu Dec 29 03:24:34 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Dec 29 03:24:34 2011] Updating source flux to 4.6e-12