[Wed Feb 22 22:20:34 2012] Detection parameters:
  Position = (324.9, 339.8) = 17 49 33.44 -28 19 43.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 476.0 +/- 32.7
  Background counts = 93.7
  Rate = 0.02 +/- 0.001

[Wed Feb 22 22:20:36 2012] Off-axis axis estimate = 3.56'
[Wed Feb 22 22:23:16 2012] Using EEF radius (= 8.21 ")to estimate initial spatial extent for simple fitting
[Wed Feb 22 22:23:16 2012] Initial guess for spatial extent in simple fitting = 8.21"
[Wed Feb 22 22:23:16 2012] source mask rpix=1.9, npix_max = 22, mask sum = 16, frac = 0.702
[Wed Feb 22 22:23:16 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 8.21"
[Thu Feb 23 02:26:32 2012] fullrun_mos1_xmm0410580501_pi300-10000_cl_pass0_src5.ximg exists
[Thu Feb 23 02:26:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0410580501_pi300-10000_cl_pass0_src5.csv
[Thu Feb 23 02:26:32 2012] fullrun_mos1_xmm0410580501_pi300-10000_cl_pass0_src5_1.ximg exists
[Thu Feb 23 02:26:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0410580501_pi300-10000_cl_pass0_src5.csv
[Thu Feb 23 02:26:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0410580501_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0410580501_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 23 02:26:33 2012] fullrun_mos1_xmm0410580501_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Thu Feb 23 02:26:33 2012] fullrun_mos1_xmm0410580501_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Thu Feb 23 02:26:33 2012] Fit fullrun_mos1_xmm0410580501_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Thu Feb 23 02:36:02 2012] Source 5 is offset by 3.283137 and 6.370551 pixels which is larger than
2 X fitted extent = 2.342704 x 2.342704, not incorporating fit results
[Thu Feb 23 02:36:02 2012] Spatial fit model total counts = 1732.580000, observed total counts = 1730.000000
[Thu Feb 23 02:36:02 2012] Offset between fit and detection position for source 5 = 2.997034 pixels
[Thu Feb 23 02:36:02 2012] Warning, changing simple spatial fit ID from 5 to 25
[Thu Feb 23 02:36:02 2012] 1673.172000 total counts/ 1521.530000 bgd. counts: snr = 3.887579
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 2.997034 pixels
  Position = (327.1, 341.9) = 17 49 32.73 -28 19 28.9
  Extent = 17.3 (17.2-34.6)", rotation angle = 0
  Source counts = 151.6 +/- 40.9
  Background counts = 1521.5
  Rate = 0.005 +/- 0.001
[Thu Feb 23 02:36:02 2012] Vigneting correction estimate = 1.000000
[Thu Feb 23 02:36:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 23 02:36:02 2012] Assessing source extent using major axis lower bound
[Thu Feb 23 02:36:02 2012] Source does appear to be extended
[Thu Feb 23 02:36:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 23 02:36:02 2012] Source is confused with source 6
[Thu Feb 23 02:36:02 2012] Source is confused with source 25
[Thu Feb 23 02:36:12 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Feb 23 02:36:12 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Feb 23 02:36:12 2012] Initial guess for spatial extent in simple fitting = 17.28"
[Thu Feb 23 02:36:12 2012] source mask rpix=4.0, npix_max = 80, mask sum = 72, frac = 0.900
[Thu Feb 23 02:36:12 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 17.28"
[Thu Feb 23 05:59:29 2012] fullrun_mos1_xmm0410580501_pi300-10000_cl_pass1_src4.ximg exists
[Thu Feb 23 05:59:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0410580501_pi300-10000_cl_pass1_src4.csv
[Thu Feb 23 05:59:29 2012] fullrun_mos1_xmm0410580501_pi300-10000_cl_pass1_src4_1.ximg exists
[Thu Feb 23 05:59:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0410580501_pi300-10000_cl_pass1_src4.csv
[Thu Feb 23 05:59:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0410580501_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0410580501_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 23 05:59:30 2012] fullrun_mos1_xmm0410580501_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Thu Feb 23 05:59:30 2012] fullrun_mos1_xmm0410580501_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Thu Feb 23 05:59:30 2012] Fit fullrun_mos1_xmm0410580501_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Thu Feb 23 06:06:52 2012] Warning, spatial fit 4 centroid is now closest to src. 2
[Thu Feb 23 06:06:52 2012] Source 5 is offset by -3.564299 and 1.160736 pixels which is larger than
2 X fitted extent = 1.861467 x 1.861467, not incorporating fit results
[Thu Feb 23 06:06:52 2012] Vigneting correction estimate = 1.000000
[Thu Feb 23 06:06:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 23 06:06:52 2012] Assessing source extent using major axis lower bound
[Thu Feb 23 06:06:52 2012] Source does appear to be extended
[Thu Feb 23 06:06:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 23 06:06:57 2012] XMMSAS src. selection expression = ellipse(28405.272000, 29697.024000, 1036.842030, 1036.842030, 0.000000, X, Y)
[Thu Feb 23 06:06:57 2012] Writing source region out to fullrun_mos1_xmm0410580501_pi300-10000_pass1_cl_src5_src.reg
[Thu Feb 23 06:06:57 2012] Extracting stamp from image fullrun_mos1_xmm0410580501_pi300-10000_cl_sm2.00.img.gz, (267, 282) - (387, 401)
[Thu Feb 23 06:06:57 2012] XMMSAS bgd. selection expression = annulus(28405.272000, 29697.024000, 1728.070050, 3456.140099, X, Y) && !ellipse(27024.560340, 27541.719400, 2876.975375, 2876.975375, 0.000000, X, Y) && !ellipse(27361.958740, 29432.974518, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26521.064000, 29792.670000, 2678.816077, 2678.816077, 0.000000, X, Y) && !ellipse(27490.482800, 30172.562000, 1282.120037, 1282.120037, 0.000000, X, Y) && !ellipse(26001.177200, 32675.786200, 461.109613, 461.109613, 0.000000, X, Y) && !ellipse(24530.992000, 27639.676000, 2423.200070, 2423.200070, 0.000000, X, Y) && !ellipse(28682.072000, 26134.130000, 2492.736072, 2492.736072, 0.000000, X, Y) && !ellipse(29806.682000, 25490.934000, 1246.368036, 1246.368036, 0.000000, X, Y) && !ellipse(26247.950000, 30255.408000, 1273.816037, 1273.816037, 0.000000, X, Y) && !ellipse(25495.768000, 30901.192000, 2547.632073, 1076.384031, 3.538000, X, Y) && !ellipse(29389.886000, 30739.110000, 1382.456040, 1382.456040, 0.000000, X, Y) && !ellipse(30176.362000, 30051.256000, 1381.816040, 1381.816040, 0.000000, X, Y) && !ellipse(32267.062000, 27695.572940, 1444.168042, 1444.168042, 0.000000, X, Y)
[Thu Feb 23 06:06:57 2012] Writing fullrun_mos1_xmm0410580501_pi300-10000_pass1_cl_src5.gif
[Thu Feb 23 06:19:37 2012] Mean detx,y = (2100.20, 1100.84) 
[Thu Feb 23 06:19:38 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb 23 06:19:48 2012] Binned source spectrum to 10 counts/bin
[Thu Feb 23 06:19:48 2012] Setting source spectrum file to fullrun_mos1_xmm0410580501_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Thu Feb 23 06:19:48 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0410580501_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Thu Feb 23 09:18:23 2012] Updating aperture counts using extracted products
[Thu Feb 23 09:18:23 2012] Error reading totcts from fullrun_mos1_xmm0410580501_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Thu Feb 23 09:18:23 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 23 09:18:23 2012] Using photon index=1.80, rate=0.00472, arf fullrun_mos1_xmm0410580501_pi300-10000_pass1_cl_src5.arf
[Thu Feb 23 09:18:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb 23 09:18:23 2012] Updating source flux to 5.4e-14
[Thu Feb 23 09:18:26 2012] Flag b found in src. 5 procflags, skipping spectral fitting
[Thu Feb 23 09:18:26 2012] Flag c found in src. 5 procflags, skipping spectral fitting