[Wed Feb 22 22:20:34 2012] Detection parameters:
  Position = (306.5, 339.9) = 17 49 39.49 -28 19 43.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 407.6 +/- 33.5
  Background counts = 101.0
  Rate = 0.01 +/- 0.001

[Wed Feb 22 22:20:36 2012] Off-axis axis estimate = 3.07'
[Wed Feb 22 22:23:16 2012] Using EEF radius (= 7.96 ")to estimate initial spatial extent for simple fitting
[Wed Feb 22 22:23:16 2012] Initial guess for spatial extent in simple fitting = 7.96"
[Wed Feb 22 22:23:16 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.921
[Wed Feb 22 22:23:16 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.96"
[Thu Feb 23 02:26:32 2012] fullrun_mos1_xmm0410580501_pi300-10000_cl_pass0_src3.ximg exists
[Thu Feb 23 02:26:32 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0410580501_pi300-10000_cl_pass0_src3.csv
[Thu Feb 23 02:26:32 2012] fullrun_mos1_xmm0410580501_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Feb 23 02:26:32 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0410580501_pi300-10000_cl_pass0_src3.csv
[Thu Feb 23 02:26:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0410580501_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0410580501_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 23 02:26:33 2012] fullrun_mos1_xmm0410580501_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Feb 23 02:26:33 2012] fullrun_mos1_xmm0410580501_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Feb 23 02:26:33 2012] Fit fullrun_mos1_xmm0410580501_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Thu Feb 23 02:36:02 2012] Warning, spatial fit 3 centroid is now closest to src. 23
[Thu Feb 23 02:36:02 2012] Vigneting correction estimate = 1.000000
[Thu Feb 23 02:36:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 23 02:36:02 2012] Assessing source extent using major
[Thu Feb 23 02:36:02 2012] Source does appear to be extended
[Thu Feb 23 02:36:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 23 02:36:02 2012] Source is confused with source 23
[Thu Feb 23 02:36:12 2012] Using EEF radius (= 7.96 ")to estimate initial spatial extent for simple fitting
[Thu Feb 23 02:36:12 2012] Initial guess for spatial extent in simple fitting = 7.96"
[Thu Feb 23 02:36:12 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.921
[Thu Feb 23 02:36:12 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 7.96"
[Thu Feb 23 05:59:29 2012] fullrun_mos1_xmm0410580501_pi300-10000_cl_pass1_src3.ximg exists
[Thu Feb 23 05:59:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0410580501_pi300-10000_cl_pass1_src3.csv
[Thu Feb 23 05:59:29 2012] fullrun_mos1_xmm0410580501_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu Feb 23 05:59:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0410580501_pi300-10000_cl_pass1_src3.csv
[Thu Feb 23 05:59:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0410580501_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0410580501_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 23 05:59:30 2012] fullrun_mos1_xmm0410580501_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu Feb 23 05:59:30 2012] fullrun_mos1_xmm0410580501_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Feb 23 05:59:30 2012] Fit fullrun_mos1_xmm0410580501_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Thu Feb 23 06:06:52 2012] Source 3 is offset by -1.227294 and 6.260906 pixels which is larger than
2 X fitted extent = 2.266492 x 2.266492, not incorporating fit results
[Thu Feb 23 06:06:52 2012] Spatial fit model total counts = 2476.360000, observed total counts = 2471.000000
[Thu Feb 23 06:06:52 2012] Offset between fit and detection position for source 3 = 3.262395 pixels
[Thu Feb 23 06:06:52 2012] Warning, changing simple spatial fit ID from 3 to 17
[Thu Feb 23 06:06:52 2012] 2420.127000 total counts/ 1790.880000 bgd. counts: snr = 14.869211
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 3.262395 pixels
  Position = (305.4, 343.0) = 17 49 39.87 -28 19 24.1
  Extent = 33.5 (29.5-67.0)", rotation angle = 0
  Source counts = 629.2 +/- 49.2
  Background counts = 1790.9
  Rate = 0.02 +/- 0.002
[Thu Feb 23 06:06:52 2012] Vigneting correction estimate = 1.000000
[Thu Feb 23 06:06:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 23 06:06:52 2012] Assessing source extent using major axis lower bound
[Thu Feb 23 06:06:52 2012] Source does appear to be extended
[Thu Feb 23 06:06:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 23 06:06:57 2012] XMMSAS src. selection expression = ellipse(26521.064000, 29792.670000, 2009.112058, 2009.112058, 0.000000, X, Y)
[Thu Feb 23 06:06:57 2012] Writing source region out to fullrun_mos1_xmm0410580501_pi300-10000_pass1_cl_src3_src.reg
[Thu Feb 23 06:06:57 2012] Extracting stamp from image fullrun_mos1_xmm0410580501_pi300-10000_cl_sm2.00.img.gz, (190, 228) - (421, 458)
[Thu Feb 23 06:06:57 2012] XMMSAS bgd. selection expression = annulus(26521.064000, 29792.670000, 3348.520096, 6697.040193, X, Y) && !ellipse(27024.560340, 27541.719400, 2876.975375, 2876.975375, 0.000000, X, Y) && !ellipse(27361.958740, 29432.974518, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28405.272000, 29697.024000, 1382.456040, 1382.456040, 0.000000, X, Y) && !ellipse(27490.482800, 30172.562000, 1282.120037, 1282.120037, 0.000000, X, Y) && !ellipse(26001.177200, 32675.786200, 461.109613, 461.109613, 0.000000, X, Y) && !ellipse(24530.992000, 27639.676000, 2423.200070, 2423.200070, 0.000000, X, Y) && !ellipse(28682.072000, 26134.130000, 2492.736072, 2492.736072, 0.000000, X, Y) && !ellipse(28343.605377, 25016.744812, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25307.340424, 25019.264435, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27421.784200, 24311.456000, 1191.920034, 1191.920034, 0.000000, X, Y) && !ellipse(23585.311600, 27457.392400, 1211.600035, 1211.600035, 0.000000, X, Y) && !ellipse(29806.682000, 25490.934000, 1246.368036, 1246.368036, 0.000000, X, Y) && !ellipse(26247.950000, 30255.408000, 1273.816037, 1273.816037, 0.000000, X, Y) && !ellipse(25495.768000, 30901.192000, 2547.632073, 1076.384031, 3.538000, X, Y) && !ellipse(29389.886000, 30739.110000, 1382.456040, 1382.456040, 0.000000, X, Y) && !ellipse(30176.362000, 30051.256000, 1381.816040, 1381.816040, 0.000000, X, Y) && !ellipse(32267.062000, 27695.572940, 1444.168042, 1444.168042, 0.000000, X, Y) && !ellipse(22724.418000, 27578.885000, 1289.320037, 1289.320037, 0.000000, X, Y) && !ellipse(28801.214000, 24493.910000, 1092.680031, 1092.680031, 0.000000, X, Y)
[Thu Feb 23 06:06:57 2012] Writing fullrun_mos1_xmm0410580501_pi300-10000_pass1_cl_src3.gif
[Thu Feb 23 06:18:22 2012] Mean detx,y = (1243.81, -388.52) 
[Thu Feb 23 06:18:23 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb 23 06:19:31 2012] Binned source spectrum to 10 counts/bin
[Thu Feb 23 06:19:31 2012] Setting source spectrum file to fullrun_mos1_xmm0410580501_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Feb 23 06:19:31 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0410580501_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Thu Feb 23 09:18:23 2012] Updating aperture counts using extracted products
[Thu Feb 23 09:18:23 2012] Error reading totcts from fullrun_mos1_xmm0410580501_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Feb 23 09:18:23 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 23 09:18:23 2012] Using photon index=1.80, rate=0.0196, arf fullrun_mos1_xmm0410580501_pi300-10000_pass1_cl_src3.arf
[Thu Feb 23 09:18:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb 23 09:18:23 2012] Updating source flux to 2.2e-13
[Thu Feb 23 09:18:26 2012] Flag b found in src. 3 procflags, skipping spectral fitting
[Thu Feb 23 09:18:26 2012] Flag c found in src. 3 procflags, skipping spectral fitting