[Wed Feb 22 22:20:35 2012] Detection parameters:
  Position = (272.2, 316.0) = 17 49 50.79 -28 21 21.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 109.6 +/- 18.4
  Background counts = 72.0
  Rate = 0.004 +/- 0.0007

[Wed Feb 22 22:20:36 2012] Off-axis axis estimate = 2.29'
[Wed Feb 22 22:23:16 2012] Using EEF radius (= 7.57 ")to estimate initial spatial extent for simple fitting
[Wed Feb 22 22:23:16 2012] Initial guess for spatial extent in simple fitting = 7.57"
[Wed Feb 22 22:23:16 2012] source mask rpix=1.7, npix_max = 20, mask sum = 16, frac = 0.797
[Wed Feb 22 22:23:16 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 7.57"
[Thu Feb 23 02:26:32 2012] fullrun_mos1_xmm0410580501_pi300-10000_cl_pass0_src19.ximg exists
[Thu Feb 23 02:26:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0410580501_pi300-10000_cl_pass0_src19.csv
[Thu Feb 23 02:26:32 2012] fullrun_mos1_xmm0410580501_pi300-10000_cl_pass0_src19_1.ximg exists
[Thu Feb 23 02:26:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0410580501_pi300-10000_cl_pass0_src19.csv
[Thu Feb 23 02:26:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0410580501_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0410580501_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 23 02:26:33 2012] fullrun_mos1_xmm0410580501_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Thu Feb 23 02:26:33 2012] fullrun_mos1_xmm0410580501_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Thu Feb 23 02:26:33 2012] Fit fullrun_mos1_xmm0410580501_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Thu Feb 23 02:36:02 2012] Spatial fit model total counts = 1338.460000, observed total counts = 1340.000000
[Thu Feb 23 02:36:02 2012] Offset between fit and detection position for source 19 = 0.599851 pixels
[Thu Feb 23 02:36:02 2012] 1301.210000 total counts/ 1160.470000 bgd. counts: snr = 4.131432
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.599851 pixels
  Position = (271.7, 316.2) = 17 49 50.99 -28 21 20.9
  Extent = 15.1 (15.1-30.3)", rotation angle = 0
  Source counts = 140.7 +/- 36.1
  Background counts = 1160.5
  Rate = 0.004 +/- 0.001
[Thu Feb 23 02:36:02 2012] Vigneting correction estimate = 1.000000
[Thu Feb 23 02:36:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 23 02:36:02 2012] Assessing source extent using major axis lower bound
[Thu Feb 23 02:36:02 2012] Source does appear to be extended
[Thu Feb 23 02:36:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 23 02:36:02 2012] Source is confused with source 37
[Thu Feb 23 02:36:02 2012] Source is confused with source 38
[Thu Feb 23 02:36:12 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Feb 23 02:36:12 2012] Initial guess for spatial extent in simple fitting = 15.14"
[Thu Feb 23 02:36:12 2012] source mask rpix=3.5, npix_max = 63, mask sum = 64, frac = 1.009
[Thu Feb 23 02:36:12 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 15.14"
[Thu Feb 23 05:59:30 2012] fullrun_mos1_xmm0410580501_pi300-10000_cl_pass1_src13.ximg exists
[Thu Feb 23 05:59:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0410580501_pi300-10000_cl_pass1_src13.csv
[Thu Feb 23 05:59:30 2012] fullrun_mos1_xmm0410580501_pi300-10000_cl_pass1_src13_1.ximg exists
[Thu Feb 23 05:59:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0410580501_pi300-10000_cl_pass1_src13.csv
[Thu Feb 23 05:59:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0410580501_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0410580501_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 23 05:59:30 2012] fullrun_mos1_xmm0410580501_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Thu Feb 23 05:59:30 2012] fullrun_mos1_xmm0410580501_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Thu Feb 23 05:59:30 2012] Fit fullrun_mos1_xmm0410580501_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Thu Feb 23 06:06:52 2012] Warning, spatial fit 13 centroid is now closest to src. 8
[Thu Feb 23 06:06:52 2012] Vigneting correction estimate = 1.000000
[Thu Feb 23 06:06:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 23 06:06:52 2012] Assessing source extent using major axis lower bound
[Thu Feb 23 06:06:52 2012] Source does appear to be extended
[Thu Feb 23 06:06:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 23 06:06:57 2012] XMMSAS src. selection expression = ellipse(23585.311600, 27457.392400, 908.700026, 908.700026, 0.000000, X, Y)
[Thu Feb 23 06:06:57 2012] Writing source region out to fullrun_mos1_xmm0410580501_pi300-10000_pass1_cl_src19_src.reg
[Thu Feb 23 06:06:57 2012] Extracting stamp from image fullrun_mos1_xmm0410580501_pi300-10000_cl_sm2.00.img.gz, (219, 264) - (324, 368)
[Thu Feb 23 06:06:58 2012] XMMSAS bgd. selection expression = annulus(23585.311600, 27457.392400, 1514.500044, 3029.000087, X, Y) && !ellipse(27024.560340, 27541.719400, 2876.975375, 2876.975375, 0.000000, X, Y) && !ellipse(27361.958740, 29432.974518, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26521.064000, 29792.670000, 2678.816077, 2678.816077, 0.000000, X, Y) && !ellipse(27490.482800, 30172.562000, 1282.120037, 1282.120037, 0.000000, X, Y) && !ellipse(24530.992000, 27639.676000, 2423.200070, 2423.200070, 0.000000, X, Y) && !ellipse(28682.072000, 26134.130000, 2492.736072, 2492.736072, 0.000000, X, Y) && !ellipse(25307.340424, 25019.264435, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27421.784200, 24311.456000, 1191.920034, 1191.920034, 0.000000, X, Y) && !ellipse(26247.950000, 30255.408000, 1273.816037, 1273.816037, 0.000000, X, Y) && !ellipse(25495.768000, 30901.192000, 2547.632073, 1076.384031, 3.538000, X, Y) && !ellipse(22724.418000, 27578.885000, 1289.320037, 1289.320037, 0.000000, X, Y)
[Thu Feb 23 06:06:58 2012] Writing fullrun_mos1_xmm0410580501_pi300-10000_pass1_cl_src19.gif
[Thu Feb 23 06:24:42 2012] Mean detx,y = (180.85, -3559.23) 
[Thu Feb 23 06:24:45 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb 23 06:24:59 2012] Binned source spectrum to 10 counts/bin
[Thu Feb 23 06:24:59 2012] Setting source spectrum file to fullrun_mos1_xmm0410580501_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Thu Feb 23 06:24:59 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0410580501_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Thu Feb 23 09:18:23 2012] Updating aperture counts using extracted products
[Thu Feb 23 09:18:23 2012] Error reading totcts from fullrun_mos1_xmm0410580501_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Thu Feb 23 09:18:23 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 23 09:18:23 2012] Using photon index=1.80, rate=0.00438, arf fullrun_mos1_xmm0410580501_pi300-10000_pass1_cl_src19.arf
[Thu Feb 23 09:18:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb 23 09:18:23 2012] Updating source flux to 5.5e-14
[Thu Feb 23 09:18:26 2012] Flag c found in src. 19 procflags, skipping spectral fitting