[Wed Feb 22 22:20:34 2012] Detection parameters:
  Position = (291.4, 288.1) = 17 49 44.46 -28 23 26.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 157.2 +/- 21.9
  Background counts = 89.4
  Rate = 0.006 +/- 0.0008

[Wed Feb 22 22:20:36 2012] Off-axis axis estimate = 0.90'
[Wed Feb 22 22:23:16 2012] Using EEF radius (= 6.88 ")to estimate initial spatial extent for simple fitting
[Wed Feb 22 22:23:16 2012] Initial guess for spatial extent in simple fitting = 6.88"
[Wed Feb 22 22:23:16 2012] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.154
[Wed Feb 22 22:23:16 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 6.88"
[Thu Feb 23 02:26:32 2012] fullrun_mos1_xmm0410580501_pi300-10000_cl_pass0_src11.ximg exists
[Thu Feb 23 02:26:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0410580501_pi300-10000_cl_pass0_src11.csv
[Thu Feb 23 02:26:32 2012] fullrun_mos1_xmm0410580501_pi300-10000_cl_pass0_src11_1.ximg exists
[Thu Feb 23 02:26:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0410580501_pi300-10000_cl_pass0_src11.csv
[Thu Feb 23 02:26:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0410580501_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0410580501_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 23 02:26:33 2012] fullrun_mos1_xmm0410580501_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Thu Feb 23 02:26:33 2012] fullrun_mos1_xmm0410580501_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Thu Feb 23 02:26:33 2012] Fit fullrun_mos1_xmm0410580501_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Thu Feb 23 02:36:02 2012] Source 11 is offset by -5.879857 and -7.191075 pixels which is larger than
2 X fitted extent = 1.687853 x 1.687853, not incorporating fit results
[Thu Feb 23 02:36:02 2012] Source 11 is offset by 0.328120 and 1.468258 pixels which is larger than
2 X fitted extent = 1.403122 x 1.403122, not incorporating fit results
[Thu Feb 23 02:36:02 2012] Vigneting correction estimate = 1.000000
[Thu Feb 23 02:36:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 23 02:36:02 2012] Assessing source extent using major
[Thu Feb 23 02:36:02 2012] Source does appear to be extended
[Thu Feb 23 02:36:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 23 02:36:12 2012] Using EEF radius (= 6.88 ")to estimate initial spatial extent for simple fitting
[Thu Feb 23 02:36:12 2012] Initial guess for spatial extent in simple fitting = 6.88"
[Thu Feb 23 02:36:12 2012] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.154
[Thu Feb 23 02:36:12 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 6.88"
[Thu Feb 23 05:59:30 2012] fullrun_mos1_xmm0410580501_pi300-10000_cl_pass1_src10.ximg exists
[Thu Feb 23 05:59:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0410580501_pi300-10000_cl_pass1_src10.csv
[Thu Feb 23 05:59:30 2012] fullrun_mos1_xmm0410580501_pi300-10000_cl_pass1_src10_1.ximg exists
[Thu Feb 23 05:59:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0410580501_pi300-10000_cl_pass1_src10.csv
[Thu Feb 23 05:59:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0410580501_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0410580501_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 23 05:59:30 2012] fullrun_mos1_xmm0410580501_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Thu Feb 23 05:59:30 2012] fullrun_mos1_xmm0410580501_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Thu Feb 23 05:59:30 2012] Fit fullrun_mos1_xmm0410580501_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Thu Feb 23 06:06:52 2012] Source 11 is offset by -5.879857 and -7.079972 pixels which is larger than
2 X fitted extent = 2.726184 x 2.726184, not incorporating fit results
[Thu Feb 23 06:06:52 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 23.713654 pixels away
[Thu Feb 23 06:06:52 2012] Vigneting correction estimate = 1.000000
[Thu Feb 23 06:06:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 23 06:06:52 2012] Assessing source extent using major
[Thu Feb 23 06:06:52 2012] Source does appear to be extended
[Thu Feb 23 06:06:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 23 06:06:57 2012] XMMSAS src. selection expression = ellipse(25307.340424, 25019.264435, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Feb 23 06:06:57 2012] Writing source region out to fullrun_mos1_xmm0410580501_pi300-10000_pass1_cl_src11_src.reg
[Thu Feb 23 06:06:57 2012] Extracting stamp from image fullrun_mos1_xmm0410580501_pi300-10000_cl_sm2.00.img.gz, (254, 251) - (329, 326)
[Thu Feb 23 06:06:57 2012] XMMSAS bgd. selection expression = annulus(25307.340424, 25019.264435, 1087.500000, 2175.000000, X, Y) && !ellipse(27024.560340, 27541.719400, 2876.975375, 2876.975375, 0.000000, X, Y) && !ellipse(26521.064000, 29792.670000, 2678.816077, 2678.816077, 0.000000, X, Y) && !ellipse(24530.992000, 27639.676000, 2423.200070, 2423.200070, 0.000000, X, Y) && !ellipse(28682.072000, 26134.130000, 2492.736072, 2492.736072, 0.000000, X, Y) && !ellipse(28343.605377, 25016.744812, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27421.784200, 24311.456000, 1191.920034, 1191.920034, 0.000000, X, Y) && !ellipse(23585.311600, 27457.392400, 1211.600035, 1211.600035, 0.000000, X, Y) && !ellipse(22724.418000, 27578.885000, 1289.320037, 1289.320037, 0.000000, X, Y)
[Thu Feb 23 06:06:57 2012] Writing fullrun_mos1_xmm0410580501_pi300-10000_pass1_cl_src11.gif
[Thu Feb 23 06:23:45 2012] Mean detx,y = (-2241.46, -1944.47) 
[Thu Feb 23 06:23:46 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb 23 06:23:55 2012] Binned source spectrum to 10 counts/bin
[Thu Feb 23 06:23:55 2012] Setting source spectrum file to fullrun_mos1_xmm0410580501_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Thu Feb 23 06:23:55 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0410580501_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Thu Feb 23 08:17:49 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Feb 23 08:17:49 2012] rmf not generated due to insufficient counts
[Thu Feb 23 09:18:23 2012] Updating aperture counts using extracted products
[Thu Feb 23 09:18:23 2012] Error reading totcts from fullrun_mos1_xmm0410580501_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Thu Feb 23 09:18:23 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 23 09:18:23 2012] Using photon index=1.80, rate=0.00554, arf fullrun_mos1_xmm0410580501_pi300-10000_pass1_cl_src11.arf
[Thu Feb 23 09:18:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb 23 09:18:23 2012] Updating source flux to 7.1e-14
[Thu Feb 23 09:18:26 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting