[Wed Feb 22 22:20:34 2012] Detection parameters:
  Position = (311.2, 317.0) = 17 49 37.94 -28 21 17.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 134035.8 +/- 439.0
  Background counts = 122.7
  Rate = 4 +/- 0.01

[Wed Feb 22 22:20:36 2012] Off-axis axis estimate = 1.64'
[Wed Feb 22 22:23:16 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Wed Feb 22 22:23:16 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Wed Feb 22 22:23:16 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.853
[Wed Feb 22 22:23:16 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.25"
[Thu Feb 23 02:26:32 2012] fullrun_mos1_xmm0410580501_pi300-10000_cl_pass0_src1.ximg exists
[Thu Feb 23 02:26:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0410580501_pi300-10000_cl_pass0_src1.csv
[Thu Feb 23 02:26:32 2012] fullrun_mos1_xmm0410580501_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Feb 23 02:26:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0410580501_pi300-10000_cl_pass0_src1.csv
[Thu Feb 23 02:26:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0410580501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0410580501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 23 02:26:33 2012] fullrun_mos1_xmm0410580501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Feb 23 02:26:33 2012] fullrun_mos1_xmm0410580501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Feb 23 02:26:33 2012] Fit fullrun_mos1_xmm0410580501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Feb 23 02:36:02 2012] Spatial fit model total counts = 173624.000000, observed total counts = 176530.000000
[Thu Feb 23 02:36:02 2012] Offset between fit and detection position for source 1 = 0.095057 pixels
[Thu Feb 23 02:36:02 2012] 173480.000000 total counts/ 25600.000000 bgd. counts: snr = 924.250000
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.095057 pixels
  Position = (311.2, 317.1) = 17 49 37.95 -28 21 16.7
  Extent = 11.9 (11.8-11.9)", rotation angle = 0
  Source counts = 147880.0 +/- 416.5
  Background counts = 25600.0
  Rate = 5 +/- 0.01
[Thu Feb 23 02:36:02 2012] Vigneting correction estimate = 1.000000
[Thu Feb 23 02:36:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 23 02:36:02 2012] Assessing source extent using major axis lower bound
[Thu Feb 23 02:36:02 2012] Source does appear to be extended
[Thu Feb 23 02:36:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 23 02:36:12 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Feb 23 02:36:12 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Feb 23 02:36:12 2012] Initial guess for spatial extent in simple fitting = 11.86"
[Thu Feb 23 02:36:12 2012] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.865
[Thu Feb 23 02:36:12 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 11.86"
[Thu Feb 23 05:59:29 2012] fullrun_mos1_xmm0410580501_pi300-10000_cl_pass1_src1.ximg exists
[Thu Feb 23 05:59:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0410580501_pi300-10000_cl_pass1_src1.csv
[Thu Feb 23 05:59:29 2012] fullrun_mos1_xmm0410580501_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Feb 23 05:59:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0410580501_pi300-10000_cl_pass1_src1.csv
[Thu Feb 23 05:59:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0410580501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0410580501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 23 05:59:30 2012] fullrun_mos1_xmm0410580501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Feb 23 05:59:30 2012] fullrun_mos1_xmm0410580501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Feb 23 05:59:30 2012] Fit fullrun_mos1_xmm0410580501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Feb 23 06:06:52 2012] Spatial fit model total counts = 198259.000000, observed total counts = 201781.000000
[Thu Feb 23 06:06:52 2012] Offset between fit and detection position for source 1 = 0.036300 pixels
[Thu Feb 23 06:06:52 2012] 198379.000000 total counts/ 48400.000000 bgd. counts: snr = 681.722727
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.036300 pixels
  Position = (311.2, 317.1) = 17 49 37.96 -28 21 16.7
  Extent = 12.0 (11.9-12.0)", rotation angle = 0
  Source counts = 149979.0 +/- 445.4
  Background counts = 48400.0
  Rate = 5 +/- 0.01
[Thu Feb 23 06:06:52 2012] Vigneting correction estimate = 1.000000
[Thu Feb 23 06:06:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 23 06:06:52 2012] Assessing source extent using major axis lower bound
[Thu Feb 23 06:06:52 2012] Source does appear to be extended
[Thu Feb 23 06:06:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 23 06:06:57 2012] Counts = 149979.000000, rescaling region sizes by 3.000000
[Thu Feb 23 06:06:57 2012] XMMSAS src. selection expression = ellipse(27024.560340, 27541.719400, 2157.731531, 2157.731531, 0.000000, X, Y)
[Thu Feb 23 06:06:57 2012] Writing source region out to fullrun_mos1_xmm0410580501_pi300-10000_pass1_cl_src1_src.reg
[Thu Feb 23 06:06:57 2012] Extracting stamp from image fullrun_mos1_xmm0410580501_pi300-10000_cl_sm2.00.img.gz, (187, 193) - (435, 441)
[Thu Feb 23 06:06:57 2012] XMMSAS bgd. selection expression = annulus(27024.560340, 27541.719400, 10788.657655, 21577.315310, X, Y) && !ellipse(27361.958740, 29432.974518, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26521.064000, 29792.670000, 2678.816077, 2678.816077, 0.000000, X, Y) && !ellipse(28405.272000, 29697.024000, 1382.456040, 1382.456040, 0.000000, X, Y) && !ellipse(27490.482800, 30172.562000, 1282.120037, 1282.120037, 0.000000, X, Y) && !ellipse(26001.177200, 32675.786200, 461.109613, 461.109613, 0.000000, X, Y) && !ellipse(24530.992000, 27639.676000, 2423.200070, 2423.200070, 0.000000, X, Y) && !ellipse(28682.072000, 26134.130000, 2492.736072, 2492.736072, 0.000000, X, Y) && !ellipse(28343.605377, 25016.744812, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25307.340424, 25019.264435, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27421.784200, 24311.456000, 1191.920034, 1191.920034, 0.000000, X, Y) && !ellipse(37497.848600, 35867.081400, 507.302415, 507.302415, 0.000000, X, Y) && !ellipse(23585.311600, 27457.392400, 1211.600035, 1211.600035, 0.000000, X, Y) && !ellipse(29806.682000, 25490.934000, 1246.368036, 1246.368036, 0.000000, X, Y) && !ellipse(28655.270000, 43825.237200, 2232.544064, 2232.544064, 0.000000, X, Y) && !ellipse(26247.950000, 30255.408000, 1273.816037, 1273.816037, 0.000000, X, Y) && !ellipse(25495.768000, 30901.192000, 2547.632073, 1076.384031, 3.538000, X, Y) && !ellipse(29389.886000, 30739.110000, 1382.456040, 1382.456040, 0.000000, X, Y) && !ellipse(30176.362000, 30051.256000, 1381.816040, 1381.816040, 0.000000, X, Y) && !ellipse(32267.062000, 27695.572940, 1444.168042, 1444.168042, 0.000000, X, Y) && !ellipse(22724.418000, 27578.885000, 1289.320037, 1289.320037, 0.000000, X, Y) && !ellipse(28801.214000, 24493.910000, 1092.680031, 1092.680031, 0.000000, X, Y)
[Thu Feb 23 06:06:57 2012] Writing fullrun_mos1_xmm0410580501_pi300-10000_pass1_cl_src1.gif
[Thu Feb 23 06:07:16 2012] Mean detx,y = (181.25, -199.50) 
[Thu Feb 23 06:07:19 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb 23 06:17:48 2012] Binned source spectrum to 10 counts/bin
[Thu Feb 23 06:17:48 2012] Setting source spectrum file to fullrun_mos1_xmm0410580501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Feb 23 06:17:48 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0410580501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Feb 23 09:18:23 2012] Updating aperture counts using extracted products
[Thu Feb 23 09:18:23 2012] Error reading totcts from fullrun_mos1_xmm0410580501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Feb 23 09:18:23 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 23 09:18:23 2012] Using photon index=1.80, rate=4.67, arf fullrun_mos1_xmm0410580501_pi300-10000_pass1_cl_src1.arf
[Thu Feb 23 09:18:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb 23 09:18:23 2012] Updating source flux to 4.8e-11
[Thu Feb 23 09:23:55 2012] Reading fit data from xmm0410580501/analysis//spectral/fullrun_mos1_xmm0410580501_pi300-10000_pass1_cl_src1_pl.csv
[Thu Feb 23 09:23:55 2012] Spectral fit parameter nH value = 4.08829e+22
[Thu Feb 23 09:23:55 2012] Spectral fit parameter PhoIndex value = 1.35206
[Thu Feb 23 09:23:55 2012] Failed to get F(0.3-8.0) from xmm0410580501/analysis//spectral/fullrun_mos1_xmm0410580501_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Feb 23 09:23:55 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 23 09:23:55 2012] Using Nh = 4.1e+22, photon index=1.35, rate=4.67, arf fullrun_mos1_xmm0410580501_pi300-10000_pass1_cl_src1.arf
[Thu Feb 23 09:23:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb 23 09:23:55 2012] Updating source flux to 1.2e-10