[Mon Jul  9 17:08:37 2012] Detection parameters:
  Position = (338.7, 286.9) = 17 49 29.07 -28 23 26.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 98.7 +/- 18.8
  Background counts = 79.6
  Rate = 0.003 +/- 0.0006

[Mon Jul  9 17:08:37 2012] Off-axis axis estimate = 3.04'
[Mon Jul  9 17:10:02 2012] Using EEF radius (= 7.95 ")to estimate initial spatial extent for simple fitting
[Mon Jul  9 17:10:02 2012] Initial guess for spatial extent in simple fitting = 7.95"
[Mon Jul  9 17:10:02 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.924
[Mon Jul  9 17:10:02 2012] Giving source the simple spatial ID 40 for pass 0, mean size = 7.95"
[Mon Jul  9 19:00:39 2012] fullrun_mos1_xmm0410580401_pi300-10000_cl_pass0_src40.ximg exists
[Mon Jul  9 19:00:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0410580401_pi300-10000_cl_pass0_src40.csv
[Mon Jul  9 19:00:39 2012] fullrun_mos1_xmm0410580401_pi300-10000_cl_pass0_src40_1.ximg exists
[Mon Jul  9 19:00:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0410580401_pi300-10000_cl_pass0_src40.csv
[Mon Jul  9 19:00:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0410580401_pi300-10000_cl_pass0_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0410580401_pi300-10000_cl_pass0_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  9 19:00:40 2012] fullrun_mos1_xmm0410580401_pi300-10000_cl_pass0_tfrozen_src40.ximg exists
[Mon Jul  9 19:00:40 2012] fullrun_mos1_xmm0410580401_pi300-10000_cl_pass0_tfrozen_src40_1.ximg exists
[Mon Jul  9 19:00:40 2012] Fit fullrun_mos1_xmm0410580401_pi300-10000_cl_pass0_tfrozen_src40 appears to have run properly
[Mon Jul  9 19:07:08 2012] Spatial fit model total counts = 1510.700000, observed total counts = 1508.000000
[Mon Jul  9 19:07:08 2012] Offset between fit and detection position for source 40 = 0.936181 pixels
[Mon Jul  9 19:07:08 2012] 1495.580500 total counts/ 1483.200000 bgd. counts: snr = 0.321468
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 0.936181 pixels
  Position = (339.5, 286.5) = 17 49 28.80 -28 23 29.4
  Extent = 2.1 (2.0-4.1)", rotation angle = 0
  Source counts = 12.4 +/- 38.7
  Background counts = 1483.2
  Rate = 0.0004 +/- 0.001
  Deleting source due to low Poisson probability