[Fri Mar 30 20:32:38 2012] Detection parameters:
  Position = (188.6, 114.8) = 19 7 42.08 9 7 11.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 173.1 +/- 17.3
  Background counts = 19.3
  Rate = 0.008 +/- 0.0008

[Fri Mar 30 20:32:38 2012] Off-axis axis estimate = 15.51'
[Fri Mar 30 21:31:09 2012] Using EEF radius (= 14.18 ")to estimate initial spatial extent for simple fitting
[Fri Mar 30 21:31:09 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Mar 30 21:31:09 2012] Initial guess for spatial extent in simple fitting = 14.18"
[Fri Mar 30 21:31:09 2012] source mask rpix=3.3, npix_max = 56, mask sum = 49, frac = 0.866
[Fri Mar 30 21:31:09 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 14.18"
[Fri Mar 30 21:51:09 2012] fullrun_mos2_xmm0410580101_pi300-10000_cl_pass0_src3.ximg exists
[Fri Mar 30 21:51:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0410580101_pi300-10000_cl_pass0_src3.csv
[Fri Mar 30 21:51:09 2012] fullrun_mos2_xmm0410580101_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Mar 30 21:51:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0410580101_pi300-10000_cl_pass0_src3.csv
[Fri Mar 30 21:51:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0410580101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0410580101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 21:51:09 2012] fullrun_mos2_xmm0410580101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Mar 30 21:51:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0410580101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Fri Mar 30 21:51:09 2012] fullrun_mos2_xmm0410580101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Mar 30 21:51:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0410580101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Fri Mar 30 21:51:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0410580101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0410580101_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 21:51:20 2012] Spatial fit model total counts = 335.755000, observed total counts = 209.000000
[Fri Mar 30 21:51:20 2012] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Mar 30 21:51:20 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 21:51:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 21:51:20 2012] Assessing source extent using major
[Fri Mar 30 21:51:20 2012] Source does appear to be extended
[Fri Mar 30 21:51:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 22:43:15 2012] Using EEF radius (= 14.18 ")to estimate initial spatial extent for simple fitting
[Fri Mar 30 22:43:15 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Mar 30 22:43:15 2012] Initial guess for spatial extent in simple fitting = 14.18"
[Fri Mar 30 22:43:15 2012] source mask rpix=3.3, npix_max = 56, mask sum = 49, frac = 0.866
[Fri Mar 30 22:43:15 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 14.18"
[Fri Mar 30 23:00:26 2012] fullrun_mos2_xmm0410580101_pi300-10000_cl_pass1_src3.ximg exists
[Fri Mar 30 23:00:26 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0410580101_pi300-10000_cl_pass1_src3.csv
[Fri Mar 30 23:00:26 2012] fullrun_mos2_xmm0410580101_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Mar 30 23:00:26 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0410580101_pi300-10000_cl_pass1_src3.csv
[Fri Mar 30 23:00:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0410580101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0410580101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 23:00:26 2012] fullrun_mos2_xmm0410580101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Mar 30 23:00:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0410580101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Fri Mar 30 23:00:26 2012] fullrun_mos2_xmm0410580101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Mar 30 23:00:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0410580101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Fri Mar 30 23:00:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0410580101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0410580101_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 23:00:37 2012] Source 3 is offset by -5.253719 and -6.963200 pixels which is larger than
2 X fitted extent = 0.725641 x 0.725641, not incorporating fit results
[Fri Mar 30 23:00:37 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 23:00:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 23:00:37 2012] Assessing source extent using major
[Fri Mar 30 23:00:37 2012] Source does appear to be extended
[Fri Mar 30 23:00:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 23:42:10 2012] XMMSAS src. selection expression = ellipse(16355.472397, 9942.747612, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Mar 30 23:42:10 2012] Writing source region out to fullrun_mos2_xmm0410580101_pi300-10000_pass1_cl_src3_src.reg
[Fri Mar 30 23:42:10 2012] Extracting stamp from image fullrun_mos2_xmm0410580101_pi300-10000_cl_sm2.00.img.gz, (151, 77) - (226, 152)
[Fri Mar 30 23:42:10 2012] XMMSAS bgd. selection expression = annulus(16355.472397, 9942.747612, 1087.500000, 2175.000000, X, Y)
[Fri Mar 30 23:42:10 2012] Writing fullrun_mos2_xmm0410580101_pi300-10000_pass1_cl_src3.gif
[Fri Mar 30 23:44:07 2012] Mean detx,y = (-7109.79, 14980.70) 
[Fri Mar 30 23:44:09 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 30 23:44:30 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 30 23:44:30 2012] Setting source spectrum file to fullrun_mos2_xmm0410580101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Mar 30 23:44:30 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0410580101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri Mar 30 23:53:07 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Mar 30 23:53:07 2012] rmf not generated due to insufficient counts
[Fri Mar 30 23:54:50 2012] Updating aperture counts using extracted products
[Fri Mar 30 23:54:50 2012] Error reading totcts from fullrun_mos2_xmm0410580101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Mar 30 23:54:51 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 30 23:54:51 2012] Using photon index=1.80, rate=0.00777, arf fullrun_mos2_xmm0410580101_pi300-10000_pass1_cl_src3.arf
[Fri Mar 30 23:54:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 30 23:54:51 2012] Updating source flux to 2.8e-13
[Fri Mar 30 23:55:32 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting