[Sun Jun 16 19:13:37 2013] Detection parameters:
  Position = (399.1, 276.8) = 17 49 48.29 -6 45 16.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 123.7 +/- 14.7
  Background counts = 19.5
  Rate = 0.004 +/- 0.0004

[Sun Jun 16 19:13:37 2013] Off-axis axis estimate = 7.47'
[Sun Jun 16 19:13:50 2013] Using EEF radius (= 10.16 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 19:13:50 2013] Initial guess for spatial extent in simple fitting = 10.16"
[Sun Jun 16 19:13:50 2013] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.119
[Sun Jun 16 19:13:50 2013] Giving source the simple spatial ID 7 for pass 0, mean size = 10.16"
[Sun Jun 16 19:13:51 2013] fullrun_mos2_xmm0410180501_pi300-10000_cl_pass0_src7.ximg exists
[Sun Jun 16 19:13:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0410180501_pi300-10000_cl_pass0_src7.csv
[Sun Jun 16 19:13:51 2013] fullrun_mos2_xmm0410180501_pi300-10000_cl_pass0_src7_1.ximg exists
[Sun Jun 16 19:13:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0410180501_pi300-10000_cl_pass0_src7.csv
[Sun Jun 16 19:13:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0410180501_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0410180501_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 19:13:51 2013] fullrun_mos2_xmm0410180501_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Sun Jun 16 19:13:51 2013] fullrun_mos2_xmm0410180501_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Sun Jun 16 19:13:51 2013] Fit fullrun_mos2_xmm0410180501_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Sun Jun 16 19:13:59 2013] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 13.183608 pixels away
[Sun Jun 16 19:13:59 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 19:13:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 19:13:59 2013] Assessing source extent using major
[Sun Jun 16 19:13:59 2013] Source does appear to be extended
[Sun Jun 16 19:13:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 19:14:07 2013] Using EEF radius (= 10.16 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 19:14:07 2013] Initial guess for spatial extent in simple fitting = 10.16"
[Sun Jun 16 19:14:07 2013] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.119
[Sun Jun 16 19:14:07 2013] Giving source the simple spatial ID 7 for pass 1, mean size = 10.16"
[Sun Jun 16 19:14:08 2013] fullrun_mos2_xmm0410180501_pi300-10000_cl_pass1_src7.ximg exists
[Sun Jun 16 19:14:08 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0410180501_pi300-10000_cl_pass1_src7.csv
[Sun Jun 16 19:14:08 2013] fullrun_mos2_xmm0410180501_pi300-10000_cl_pass1_src7_1.ximg exists
[Sun Jun 16 19:14:08 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0410180501_pi300-10000_cl_pass1_src7.csv
[Sun Jun 16 19:14:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0410180501_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0410180501_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 19:14:08 2013] fullrun_mos2_xmm0410180501_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Sun Jun 16 19:14:08 2013] fullrun_mos2_xmm0410180501_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Sun Jun 16 19:14:08 2013] Fit fullrun_mos2_xmm0410180501_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Sun Jun 16 19:14:20 2013] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 11.941875 pixels away
[Sun Jun 16 19:14:20 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 19:14:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 19:14:20 2013] Assessing source extent using major
[Sun Jun 16 19:14:20 2013] Source does appear to be extended
[Sun Jun 16 19:14:20 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 19:20:20 2013] XMMSAS src. selection expression = ellipse(34673.107605, 24030.921814, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 16 19:20:20 2013] Writing source region out to fullrun_mos2_xmm0410180501_pi300-10000_pass1_cl_src7_src.reg
[Sun Jun 16 19:20:20 2013] Extracting stamp from image fullrun_mos2_xmm0410180501_pi300-10000_cl_sm2.00.img.gz, (362, 239) - (437, 314)
[Sun Jun 16 19:20:20 2013] XMMSAS bgd. selection expression = annulus(34673.107605, 24030.921814, 1087.500000, 2175.000000, X, Y)
[Sun Jun 16 19:20:20 2013] Writing fullrun_mos2_xmm0410180501_pi300-10000_pass1_cl_src7.gif
[Sun Jun 16 19:22:30 2013] Mean detx,y = (-7664.47, -2751.30) 
[Sun Jun 16 19:22:31 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 16 19:22:47 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 16 19:22:47 2013] Setting source spectrum file to fullrun_mos2_xmm0410180501_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sun Jun 16 19:22:47 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0410180501_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Sun Jun 16 19:27:26 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 16 19:27:26 2013] rmf not generated due to insufficient counts
[Sun Jun 16 19:28:35 2013] Updating aperture counts using extracted products
[Sun Jun 16 19:28:35 2013] Total counts from fullrun_mos2_xmm0410180501_pi300-10000_pass1_cl_src7_src_b10.pi.gz = 242.00
[Sun Jun 16 19:28:35 2013] Total counts from fullrun_mos2_xmm0410180501_pi300-10000_pass1_cl_src7_bgd.pi.gz = 811.00
[Sun Jun 16 19:28:35 2013] Got source and background scale factors 1342400.000000, 8082897.000000
[Sun Jun 16 19:28:35 2013] User source parameters:
  Position = (399.1, 276.8) = 17 49 48.29 -6 45 16.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 107.3 +/- 16.6
  Background aperture counts = 134.7
  Rate = 0.002 +/- 0.0003

[Sun Jun 16 19:28:35 2013] Updating counts from extracted products
[Sun Jun 16 19:28:35 2013] Set source signif. to 107.31/11.61 = 9.25
[Sun Jun 16 19:28:36 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 19:28:36 2013] Using photon index=1.80, rate=0.00221, arf fullrun_mos2_xmm0410180501_pi300-10000_pass1_cl_src7.arf
[Sun Jun 16 19:28:36 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 19:28:36 2013] Updating source flux to 3.6e-14
[Sun Jun 16 19:28:38 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 19:28:39 2013] xmm0410180501/analysis//spectral/fullrun_mos2_xmm0410180501_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete