[Sun Jun 16 19:13:36 2013] Detection parameters:
  Position = (304.6, 354.0) = 17 50 15.88 -6 39 39.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 325.3 +/- 22.4
  Background counts = 20.1
  Rate = 0.008 +/- 0.0005

[Sun Jun 16 19:13:36 2013] Off-axis axis estimate = 4.05'
[Sun Jun 16 19:13:50 2013] Using EEF radius (= 8.46 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 19:13:50 2013] Initial guess for spatial extent in simple fitting = 8.46"
[Sun Jun 16 19:13:50 2013] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.837
[Sun Jun 16 19:13:50 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 8.46"
[Sun Jun 16 19:13:50 2013] fullrun_mos1_xmm0410180501_pi300-10000_cl_pass0_src4.ximg exists
[Sun Jun 16 19:13:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0410180501_pi300-10000_cl_pass0_src4.csv
[Sun Jun 16 19:13:50 2013] fullrun_mos1_xmm0410180501_pi300-10000_cl_pass0_src4_1.ximg exists
[Sun Jun 16 19:13:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0410180501_pi300-10000_cl_pass0_src4.csv
[Sun Jun 16 19:13:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0410180501_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0410180501_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 19:13:50 2013] fullrun_mos1_xmm0410180501_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sun Jun 16 19:13:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0410180501_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sun Jun 16 19:13:50 2013] fullrun_mos1_xmm0410180501_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sun Jun 16 19:13:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0410180501_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sun Jun 16 19:13:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0410180501_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0410180501_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 19:13:57 2013] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 11.298256 pixels away
[Sun Jun 16 19:13:57 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 19:13:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 19:13:57 2013] Assessing source extent using major
[Sun Jun 16 19:13:57 2013] Source does appear to be extended
[Sun Jun 16 19:13:57 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 19:14:07 2013] Using EEF radius (= 8.46 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 19:14:07 2013] Initial guess for spatial extent in simple fitting = 8.46"
[Sun Jun 16 19:14:07 2013] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.837
[Sun Jun 16 19:14:07 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 8.46"
[Sun Jun 16 19:14:07 2013] fullrun_mos1_xmm0410180501_pi300-10000_cl_pass1_src4.ximg exists
[Sun Jun 16 19:14:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0410180501_pi300-10000_cl_pass1_src4.csv
[Sun Jun 16 19:14:07 2013] fullrun_mos1_xmm0410180501_pi300-10000_cl_pass1_src4_1.ximg exists
[Sun Jun 16 19:14:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0410180501_pi300-10000_cl_pass1_src4.csv
[Sun Jun 16 19:14:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0410180501_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0410180501_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 19:14:07 2013] fullrun_mos1_xmm0410180501_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Sun Jun 16 19:14:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0410180501_pi300-10000_cl_pass1_tfrozen_src4.csv
[Sun Jun 16 19:14:07 2013] fullrun_mos1_xmm0410180501_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Sun Jun 16 19:14:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0410180501_pi300-10000_cl_pass1_tfrozen_src4.csv
[Sun Jun 16 19:14:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0410180501_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0410180501_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 19:14:18 2013] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 11.298256 pixels away
[Sun Jun 16 19:14:18 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 19:14:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 19:14:18 2013] Assessing source extent using major
[Sun Jun 16 19:14:18 2013] Source does appear to be extended
[Sun Jun 16 19:14:18 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 19:14:32 2013] XMMSAS src. selection expression = ellipse(26455.518463, 30750.562012, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 16 19:14:32 2013] Not overwriting source region fullrun_mos1_xmm0410180501_pi300-10000_pass1_cl_src3_src.reg
[Sun Jun 16 19:14:32 2013] Extracting stamp from image fullrun_mos1_xmm0410180501_pi300-10000_cl_sm2.00.img.gz, (267, 317) - (342, 392)
[Sun Jun 16 19:14:32 2013] XMMSAS bgd. selection expression = annulus(26455.518463, 30750.562012, 1087.500000, 2175.000000, X, Y) && !ellipse(28845.652832, 30669.981873, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 16 19:14:32 2013] Writing fullrun_mos1_xmm0410180501_pi300-10000_pass1_cl_src3.gif
[Sun Jun 16 19:14:33 2013] ../../xmm0410180501/products/events/fullrun_mos1_xmm0410180501_pi300-10000_pass1_cl_src3_src.evt and ../../xmm0410180501/products/events/fullrun_mos1_xmm0410180501_pi300-10000_pass1_cl_src3_bgd.evt exist, delete to re-create
[Sun Jun 16 19:14:33 2013] Mean detx,y = (3413.17, -1256.01) 
[Sun Jun 16 19:14:33 2013] ../../xmm0410180501/products/images/fullrun_mos1_xmm0410180501_pi300-10000_pass1_cl_src3_src.img and ../../xmm0410180501/products/images/fullrun_mos1_xmm0410180501_pi300-10000_pass1_cl_src3_bgd.img exist, delete to re-create
[Sun Jun 16 19:14:33 2013] ../../xmm0410180501/products/spectra/fullrun_mos1_xmm0410180501_pi300-10000_pass1_cl_src3_src_b10.pi.gz and ../../xmm0410180501/products/spectra/fullrun_mos1_xmm0410180501_pi300-10000_pass1_cl_src3_bgd.pi exist, delete to re-create
[Sun Jun 16 19:14:33 2013] Setting source spectrum file to fullrun_mos1_xmm0410180501_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Jun 16 19:14:33 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0410180501_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sun Jun 16 19:14:33 2013] ../../xmm0410180501/products/lightcurves/fullrun_mos1_xmm0410180501_pi300-10000_pass1_cl_src3_src.lc and ../../xmm0410180501/products/lightcurves/fullrun_mos1_xmm0410180501_pi300-10000_pass1_cl_src3_bgd.lc exist, delete to re-create
[Sun Jun 16 19:19:39 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 16 19:19:39 2013] rmf not generated due to insufficient counts
[Sun Jun 16 19:28:33 2013] Updating aperture counts using extracted products
[Sun Jun 16 19:28:33 2013] Total counts from fullrun_mos1_xmm0410180501_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 399.00
[Sun Jun 16 19:28:33 2013] Total counts from fullrun_mos1_xmm0410180501_pi300-10000_pass1_cl_src3_bgd.pi.gz = 1101.00
[Sun Jun 16 19:28:33 2013] Got source and background scale factors 1256880.000000, 9853496.000000
[Sun Jun 16 19:28:34 2013] User source parameters:
  Position = (304.6, 354.0) = 17 50 15.88 -6 39 39.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 258.6 +/- 21.0
  Background aperture counts = 140.4
  Rate = 0.005 +/- 0.0004

[Sun Jun 16 19:28:34 2013] Updating counts from extracted products
[Sun Jun 16 19:28:34 2013] Set source signif. to 258.56/11.85 = 21.82
[Sun Jun 16 19:28:34 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 19:28:34 2013] Using photon index=1.80, rate=0.00532, arf fullrun_mos1_xmm0410180501_pi300-10000_pass1_cl_src3.arf
[Sun Jun 16 19:28:34 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 19:28:34 2013] Updating source flux to 6.7e-14
[Sun Jun 16 19:28:37 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 19:28:38 2013] xmm0410180501/analysis//spectral/fullrun_mos1_xmm0410180501_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete