[Mon Dec 19 02:41:01 2011] Detection parameters:
  Position = (297.3, 265.7) = 17 50 17.35 -6 46 12.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 143.9 +/- 23.3
  Background counts = 184.4
  Rate = 0.003 +/- 0.0006

[Mon Dec 19 02:41:01 2011] Off-axis axis estimate = 2.37'
[Mon Dec 19 02:46:16 2011] Using EEF radius (= 7.62 ")to estimate initial spatial extent for simple fitting
[Mon Dec 19 02:46:16 2011] Initial guess for spatial extent in simple fitting = 7.62"
[Mon Dec 19 02:46:16 2011] source mask rpix=1.8, npix_max = 20, mask sum = 25, frac = 1.234
[Mon Dec 19 02:46:16 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 7.62"
[Mon Dec 19 02:58:21 2011] fullrun_pn_xmm0410180401_pi300-10000_cl_pass0_src6.ximg exists
[Mon Dec 19 02:58:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0410180401_pi300-10000_cl_pass0_src6.csv
[Mon Dec 19 02:58:21 2011] fullrun_pn_xmm0410180401_pi300-10000_cl_pass0_src6_1.ximg exists
[Mon Dec 19 02:58:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0410180401_pi300-10000_cl_pass0_src6.csv
[Mon Dec 19 02:58:21 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0410180401_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0410180401_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 19 02:58:21 2011] fullrun_pn_xmm0410180401_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Mon Dec 19 02:58:21 2011] fullrun_pn_xmm0410180401_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Mon Dec 19 02:58:21 2011] Fit fullrun_pn_xmm0410180401_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Mon Dec 19 03:18:31 2011] Spatial fit model total counts = 647.000000, observed total counts = 647.000000
[Mon Dec 19 03:18:31 2011] Offset between fit and detection position for source 6 = 0.074880 pixels
[Mon Dec 19 03:18:31 2011] 659.598000 total counts/ 556.890000 bgd. counts: snr = 4.352307
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.074880 pixels
  Position = (297.3, 265.8) = 17 50 17.36 -6 46 13.1
  Extent = 6.3 (4.4-8.5)", rotation angle = 0
  Source counts = 102.7 +/- 25.7
  Background counts = 556.9
  Rate = 0.002 +/- 0.0006
[Mon Dec 19 03:18:31 2011] Vigneting correction estimate = 1.000000
[Mon Dec 19 03:18:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 19 03:18:31 2011] Assessing source extent using major axis lower bound
[Mon Dec 19 03:18:31 2011] Source does appear to be extended
[Mon Dec 19 03:18:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 19 03:18:44 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Dec 19 03:18:44 2011] Initial guess for spatial extent in simple fitting = 6.29"
[Mon Dec 19 03:18:44 2011] source mask rpix=1.4, npix_max = 15, mask sum = 16, frac = 1.057
[Mon Dec 19 03:18:44 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 6.29"
[Mon Dec 19 03:28:16 2011] fullrun_pn_xmm0410180401_pi300-10000_cl_pass1_src6.ximg exists
[Mon Dec 19 03:28:16 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0410180401_pi300-10000_cl_pass1_src6.csv
[Mon Dec 19 03:28:16 2011] fullrun_pn_xmm0410180401_pi300-10000_cl_pass1_src6_1.ximg exists
[Mon Dec 19 03:28:16 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0410180401_pi300-10000_cl_pass1_src6.csv
[Mon Dec 19 03:28:16 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0410180401_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0410180401_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 19 03:28:16 2011] fullrun_pn_xmm0410180401_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Mon Dec 19 03:28:16 2011] fullrun_pn_xmm0410180401_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Mon Dec 19 03:28:16 2011] Fit fullrun_pn_xmm0410180401_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Mon Dec 19 03:48:42 2011] Spatial fit model total counts = 660.000000, observed total counts = 660.000000
[Mon Dec 19 03:48:42 2011] Offset between fit and detection position for source 6 = 0.032921 pixels
[Mon Dec 19 03:48:42 2011] 670.652000 total counts/ 569.703000 bgd. counts: snr = 4.229390
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.032921 pixels
  Position = (297.3, 265.8) = 17 50 17.35 -6 46 13.0
  Extent = 6.2 (4.3-8.2)", rotation angle = 0
  Source counts = 100.9 +/- 25.9
  Background counts = 569.7
  Rate = 0.002 +/- 0.0006
[Mon Dec 19 03:48:42 2011] Vigneting correction estimate = 1.000000
[Mon Dec 19 03:48:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 19 03:48:42 2011] Assessing source extent using major axis lower bound
[Mon Dec 19 03:48:42 2011] Source does appear to be extended
[Mon Dec 19 03:48:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 19 03:48:56 2011] XMMSAS src. selection expression = ellipse(25819.378200, 23074.539800, 372.615513, 372.615513, 0.000000, X, Y)
[Mon Dec 19 03:48:56 2011] Writing source region out to fullrun_pn_xmm0410180401_pi300-10000_pass1_cl_src6_src.reg
[Mon Dec 19 03:48:56 2011] Extracting stamp from image fullrun_pn_xmm0410180401_pi300-10000_cl_sm2.00.img.gz, (276, 244) - (319, 287)
[Mon Dec 19 03:48:56 2011] XMMSAS bgd. selection expression = annulus(25819.378200, 23074.539800, 621.025855, 1242.051710, X, Y)
[Mon Dec 19 03:48:56 2011] Writing fullrun_pn_xmm0410180401_pi300-10000_pass1_cl_src6.gif
[Mon Dec 19 04:01:27 2011] Mean detx,y = (-1411.40, 4300.80) 
[Mon Dec 19 04:01:31 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Dec 19 04:01:52 2011] Binned source spectrum to 10 counts/bin
[Mon Dec 19 04:01:53 2011] Setting source spectrum file to fullrun_pn_xmm0410180401_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Mon Dec 19 04:01:53 2011] Setting bgd. spectrum file to fullrun_pn_xmm0410180401_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Mon Dec 19 05:01:07 2011] Updating aperture counts using extracted products
[Mon Dec 19 05:01:07 2011] Error reading totcts from fullrun_pn_xmm0410180401_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Mon Dec 19 05:01:07 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec 19 05:01:07 2011] Using photon index=1.80, rate=0.00245, arf fullrun_pn_xmm0410180401_pi300-10000_pass1_cl_src6.arf
[Mon Dec 19 05:01:07 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec 19 05:01:07 2011] Updating source flux to 8.3e-15